SerComm IP822LM
From TechInfoDepot
Jump to navigationJump to searchbg (G54) | |
---|---|
Powerline Access Point | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt |
Status Unknown |
Tomato any flavor |
Incompatible |
Platform | |
Brand • Model • Rev |
SerComm IP822LM |
FCC ID | |
Type |
Powerline Access Point |
CPU1 |
Marvell 88W8510 |
CPU1 Type |
ARMv9 |
CPU1 Speed |
160 MHz |
CPU2 |
Intellon INT5200 |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
? MiB |
RAM1 Size |
? MiB |
RAM1 Chip |
EtronTech Model? |
802dot11 OUI: none specified | |
Expansion IF types |
none specified |
Power |
? VAC ~ ? Hz, ? A |
Connector type |
AC (direct) |
Flags: HomePlug 1.0 | |
Other | |
Default IP address: 192.168.0.101 | |
Manuf/OEM/ODM | |
Retail | |
Availability | OEM |
FCC approval date | 19 July 2005 |
Country of manuf | Taiwan |
Radio 1 | |
Chip1 |
Marvell 88W8510 |
Chip2 |
Marvell 88W8000 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
Wireless Standard |
IEEE 802.11b/g |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Intellon chipsets with specifications, see Intellon.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented SerComm device with specifications, see SerComm.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
There is an Intellon INT5200A0 on board.
The default credentials are from the FCC submitted manual.
- The default SSID may be default.
Categories:
- SerComm
- Embedded system/Powerline Access Point
- Embedded System Marvell
- Embedded System 88W8510
- Marvell
- Embedded System ARMv9
- Embedded System
- Embedded System Intellon
- Embedded System INT5200
- Intellon
- Manuf SerComm
- Embedded System 88W8000
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation