SerComm RP101
From TechInfoDepot
Jump to navigationJump to search
| bgn (N300) | |||||||
|---|---|---|---|---|---|---|---|
| Wi-Fi Repeater Extender | |||||||
 | |||||||
| WikiDevi.wi-cat.ru | SerComm RP101 | ||||||
| 3rd Party Firmware | |||||||
| dd-wrt | Status Unknown | ||||||
| OpenWrt | Status Unknown | ||||||
| Tomato any flavor | Incompatible | ||||||
| Platform | |||||||
| Brand • Model • Rev | SerComm RP101 | ||||||
| FCC ID | P27RP101 | ||||||
| Type | repeater | ||||||
CPU1  | Ralink RT3352 | ||||||
| CPU1 Type | MIPS 24KEc | ||||||
| CPU1 Speed | not specified | ||||||
| Flash1 Chip | Brand? Model? | ||||||
| Flash1 Size | ? MiB | ||||||
| RAM1 Size | 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||
| RAM1 Chip | Nanya NT5TU32M16DG-AC | ||||||
| ETH chip1 | Ralink RT3352 | ||||||
| Ethernet Port Count | 1-100MbE-LAN | ||||||
| Wired Standard | IEEE 802.3i/3u | ||||||
|
802dot11 OUI: none specified | |||||||
| Expansion IF types | none specified | ||||||
| Power | ? VAC ~ ? Hz, ? A | ||||||
| Connector type | AC (direct) | ||||||
|
| |||||||
|
| |||||||
| Other | |||||||
|
Default IP address: 192.168.0.254 | |||||||
| Manuf/OEM/ODM | SerComm | ||||||
| Retail | |||||||
| FCC approval date | 07 March 2012 | ||||||
| Country of manuf | Taiwan | ||||||
| Radio 1 | |||||||
| Chip1 | Ralink RT3352 | ||||||
| Wireless interface OUI | none specified | ||||||
| Antenna Connector Type | U.FL | ||||||
| MIMO status | 2x2:2 | ||||||
| Wireless Standard | IEEE 802.11b/g/n | ||||||
| 802.11n | up to 300 Mbps | ||||||
| 802.11g | up to 54 Mbps | ||||||
| 802.11b | up to 11 Mbps | ||||||
| WiFi Operating Frequency | 2.4 GHz | ||||||
| |||||||
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented SerComm devices with specifications, see SerComm.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"ACT00C-1.6" is silkscreened on the board in the FCC photos.
Default credentials are from the FCC submitted manual.
