Shenzhen Anbash Technology NC316PW

From TechInfoDepot
Jump to navigationJump to search
bgn (N150)
camera
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev Shenzhen Anbash Technology NC316PW
FCC ID Z6BNC316PW
Type camera
CPU1 ☒N Grain Media GM8126
Flash1 Chip Brand? Model?
Flash1 Size ? MiB
RAM1 Size ? MiB
RAM1 Chip Brand? Model?
ETH chip1 Grain Media GM8126
Ethernet Port Count 1-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types none specified
Power 12 VDC, ? A
Connector type barrel

Flags:
schematics

Other

Default SSID: wirelessnc
Default IP address: 192.168.168.100
Default login user: admin
Default login password: admin
admin:admin credentials used by 1347 additional devices
of which 0 are Shenzhen Anbash Technology devices

Retail
FCC approval date 08 June 2012
Country of manuf China
Radio 1
Radio1 module unknown
Radio1 module IF USB (non-standard connector)
Chip1 Ralink RT3070
Wireless interface OUI none specified
Antenna Connector Type RP-SMA
MIMO status 1x1:1
Wireless Standard IEEE 802.11b/g/n
802.11n up to 150 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented Grain Media SoC's with specifications, see Grain Media.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.

150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

"JW812M0 Ver:1.3" appears to be silkscreened on the wireless module.

Additional models of NC316W, NC316P, NC326PW, NC326P, NC326W defined in the FCC test report.

The schematics state the device has 8MB Flash and 128MB RAM.

The NC326W appears to be filed under Shenzhen Baolongsheng Technology's grantee code (FCC ID: S6UBLSIPCAM)

"ABNC3161VD" is silkscreened on the main board.
Grain GM8126SF-QC SoC
Samsung K4T51163QJ (K4T51163QJ-BCE7?) 64MB RAM
"JW801M0 Ver:1.3" is silkscreened on the wireless module board. "JW-8XXMN" is on the label affixed to the module's shield.
"ABNC316IR1VB" is silkscreened on the IR light board.
"ABNC326OV97151VA" is silkscreened on the sensor module.

Default settings are per the FCC manual.

The default SSID appears to be wirelessnc (w/ Ad-Hoc mode).