SmartRG SDG-8712
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac+ax+be (be7200) | |
|---|---|
| Intellifi SMARTRG | |
|
| |
| Homepage | Product page |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | SmartRG SDG-8712 |
| FCC ID | none specified |
| Type | wireless router |
| CPU1 | MediaTek MT7987A |
| CPU1 Type | ARM Cortex-A53 |
| CPU1 Speed | 2.0 GHz ( 4 cores ) 64-bit |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> (eMMC) |
| RAM1 Size | 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | MediaTek MT7987A |
| ETH chip2 | MaxLinear MXL86211C |
| ETH chip3 | MaxLinear MXL86211C |
| Ethernet Port Count |
1-2.5GbE-WAN 2-2.5GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab/3bz |
| Port-based vlan | yes |
| 802.1q vlan | yes |
|
802dot11 OUI: none specified | |
| Stock bootloader | U-Boot |
| Expansion IF types | USB 2.0 |
| USB ports | 1 |
| USB Hub Compatible | Untested |
| Power | 12 VDC, 3 A |
| Connector type | barrel |
| Serial Port (UART) | yes, 3.3, 115200 / 8N1 |
|
Flags: | |
|
| |
|
| |
| Radio 1 | |
| Chip1 | MediaTek MT7987A |
| Chip2 | MediaTek MT7992 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n/ax/be |
| 802.11be | up to 1376 Mbps |
| 802.11ax | up to 574 Mbps |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
| Chip1 | MediaTek MT7987A |
| Chip2 | |
For a list of all currently documented MaxLinear (Intel) chipsets with specifications, see MaxLinear (Intel).
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented SmartRG devices with specifications, see SmartRG.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: 25.12.4
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: 25.12.4
LAN Comment: 2x MaxLinear MXL86211C PHY
WLAN Hardware: MediaTek MT7992
WLAN Comment: dual-band 802.11be Wi-Fi (2.4G 4T4R, 5G 4T5R)
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
WLAN Hardware: MediaTek MT7992
WLAN Comment: dual-band 802.11be Wi-Fi (2.4G 4T4R, 5G 4T5R)
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
Please insert instructions here
Categories:
- SmartRG
- Embedded system/wireless router
- Embedded System MediaTek
- Embedded System MT7987A
- MediaTek
- Embedded System ARM
- Embedded System Cortex-A53
- Embedded System MXL86211C
- Embedded System MaxLinear
- MaxLinear
- Embedded System MT7992
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax/be
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation
- New Entry