Strong 1200

abgn+ac (AC1200)
AC1200 Dual Band Wireless Router
Homepage	Product page
WikiDevi.wi-cat.ru	Strong 1200
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Strong 1200
FCC ID	2AHVHWR1201
Board ID	WR1201-ZC01
Type	wireless router
CPU1 Y	MediaTek MT7621AT
CPU1 Type	MIPS 1004Kc
CPU1 Speed	880 MHz ( 2 cores ) 16-bit
Flash1 Chip	Winbond Model?
Flash1 Size	16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size	128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip	Nanya Model?
ETH chip1	MediaTek MT7621AT
Switch	MediaTek MT7621AT
Ethernet Port Count	1-1GbE-WAN 4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Stock bootloader	U-Boot
Expansion IF types	USB 3.0
USB ports	1
USB Hub Compatible	Untested
Power	12 VDC, 1.5 A
Connector type	barrel
Serial Port (UART)	yes, 3.3V TTL, (57600 8N1)
Other
Manuf/OEM/ODM	MTC WR1201
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Retail
FCC approval date	02 June 2016
Country of manuf	China
Radio 1
Chip1	MediaTek MT7602EN
Wireless interface OUI	none specified
Antenna Connector Type	U.FL
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	MediaTek MT7612EN
Wireless interface OUI	none specified
Antenna Connector Type	U.FL
MIMO status	2x2:2
Wireless Standard	IEEE 802.11a/n/ac
802.11ac	up to 867 Mbps
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
FCC ID HooToo HT-ND001 2AHVHWR1201

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.),

• 867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.) = AC1200 class

Overview

"WR1201-ZC01-01" is silkscreened on the board in the FCC photos.

See also: HooToo HT-ND001

AC1200 (2.4/5GHz), 4 Antennas, USB 3.0 Port

Specifications

MTC WR1201 is the OEM name of the board (WR1201-ZC01-01).

It is also sold rebranded as Strong 1200 Dual Band Gigabit Router.

• SoC: MediaTek MT7621A (880MHz)
• Flash: 16 MiB; RAM: 128 MiB
• Wireless: 2.4GHz (MT7602EN)
• Wireless: 5GHz (MT7612EN)
• Ethernet speed: 10/100/1000
• Ethernet ports: 4x LAN + 1x WAN
• 1x USB 3.0 port

Links of Interest

• Strong 1200 on OpenWrt wiki
• Strong 1200 on OpenWrt forums
• HooToo HT-ND001 on OpenWrt forums
• MTC WR1201 Wireless Router on GitHub

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum

Target: ramips
Subtarget: mt7621
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 19.07.0
Current supported version: fix

LAN Hardware: MediaTek MT7621AT
WLAN Hardware: MediaTek MT7602EN, MediaTek MT7612EN
Installation method(s):
See forum, see git-commit
Install Comment:
Flash first -initramfs.bin and after, -squashfs.bin
Comment:
aka "MTC WR1201"

git • >>

ramips: add support for MTC Wireless Router WR1201 MTC Wireless Router WR1201 is the OEM name of the board. It is also sold rebranded as STRONG Dual Band Gigabit Router 1200. Specification: - SoC: MediaTek MT7621A (880 MHz) - Flash: 16 MiB - RAM: 128 MiB - Wireless: 2.4Ghz(MT7602EN) and 5Ghz (MT7612EN) - Ethernet speed: 10/100/1000 - Ethernet ports: 4+1 - 1x USB 3.0 - 1x microSD reader - Serial baud rate of Bootloader and factory firmware: 57600 The OEM webinterface writes only as much bytes as listed in the uImage header field to the flash. Also, the OEM webinterface evaluates the name field of uImage header before flashing (the string "WR1201_8_128") To flash via webinterface, is mandatory to use first initramfs.bin and after (from the OpenWrt) the sysupgrade.bin Some notes: - Some microSD will not work: mtk-sd 1e130000.sdhci: no support for card's volts mmc0: error -22 whilst initialising SDIO card mtk-sd 1e130000.sdhci: no support for card's volts mmc0: error -22 whilst initialising MMC card mtk-sd 1e130000.sdhci: no support for card's volts mmc0: error -22 whilst initialising SDIO card mtk-sd 1e130000.sdhci: card claims to support voltages below defined range mtk-sd 1e130000.sdhci: no support for card's volts mmc0: error -22 whilst initialising MMC card mtk-sd 1e130000.sdhci: no support for card's volts mmc0: error -22 whilst initialising SDIO card mtk-sd 1e130000.sdhci: no support for card's volts mmc0: error -22 whilst initialising MMC card Signed-off-by: Valentín Kivachuk