TOTOLINK BE5100R
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac+ax+be | |
|---|---|
| WiFi7 Dual Band Router | |
|
| |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | TOTOLINK BE5100R |
| FCC ID (fcc.io) | none specified |
| FCC ID (fcc.report) | none specified |
| Type | wireless router |
| CPU1 | Airoha AN7563PT |
| CPU1 Speed | 1.0 GHz ( 2 cores ) |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Airoha AN7563PT |
| Switch | Airoha AN7563PT |
| Ethernet Port Count |
1-2.5GbE-WAN 4-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab/3bz |
|
802dot11 OUI: none specified | |
| Stock bootloader | U-Boot |
| Expansion IF types | none specified |
| Power | 12 VDC, 1 A |
| Connector type | barrel |
| Serial Port (UART) | yes, 3.3, 115200 / 8N1 |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Radio 1 | |
| Chip1 | Brand? Model? |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| Wireless Standard | IEEE 802.11b/g/n/ax/be |
| WiFi Operating Frequency | 2.4 GHz |
| Radio 2 | |
| Chip1 | Brand? Model? |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| Wireless Standard | IEEE 802.11a/n/ac/ax/be |
| WiFi Operating Frequency | 5 or 6 ? GHz |
For a list of all currently documented Airoha (EcoNet) chipsets with specifications, see Airoha.
For a list of all currently documented TOTOLINK devices with specifications, see TOTOLINK.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
LAN Hardware: Airoha AN7563PT
WLAN Comment: MIMO 2x2:2 on both bands
WLAN Comment: MIMO 2x2:2 on both bands
Please insert instructions here