TP-LINK Deco X50-PoE (v2.0)

From TechInfoDepot
Jump to navigationJump to search
abgn+ac+ax (AX3000)
AX3000 Mesh WiFi
Homepage Product page
Wikipedia TP-Link
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Work in Progress
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev TP-LINK Deco X50-PoE v2.0
FCC ID 2AXJ4X50POE
Type wireless router
CPU1 checkY MediaTek MT7981B
CPU1 Type ARM Cortex-A53
CPU1 Speed 1.3 GHz ( 2 cores ) 64-bit
Flash1 Chip Brand? Model?
Flash1 Size 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (SPI-NAND)
RAM1 Size 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3)
RAM1 Chip Brand? Model?
ETH chip1 MediaTek MT7981B
ETH chip2 Realtek RTL8221B-VB-CG
Ethernet Port Count 2-2.5GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab/3bz

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types none specified
PoE 802.3bt, 802.3af, standard
Power 12 VDC, 1.2 A
Serial Port (UART) yes, 3.3V TTL, (115200 8N1)

Flags:
Wi-Fi 6, HE160, 1024-QAM, PoE+

Other
3rd Party Firmware Support OpenWrt (WIP)
Retail
ASIN B0BJZ3VFP4
Radio 1
Chip1 MediaTek MT7981B
Chip2 MediaTek MT7976
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n/ax
802.11ax up to 574 Mbps
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 MediaTek MT7981B
Chip2 MediaTek MT7976
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n/ac/ax
AX-QAM up to 2402 Mbps
802.11ax up to 1201 Mbps
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented TP-LINK devices with specifications, see TP-LINK.

• 574 Mbps - 2SS 2.4GHz 802.11ax (40MHz chan., 1024QAM),
• 2402 Mbps - 2SS 5GHz 802.11ax (160MHz chan., 1024QAM) = AX3000 class

Overview

TP-Link Deco X50-PoE v2.0 features two 2.5 Gigabit Ethernet ports that both support Power over Ethernet (PoE+, 802.3at) input, alongside an optional 12V DC power jack, allowing for flexible deployments without dedicated power outlets nearby. The power circuitry on the device is not designed for high availablity, which means it will not perform a dual-PoE handshake or provide hot-standby power redundancy between dual PoE connections or a DC adapter (EU Version: 12V/1.2A DC. US Version: 12V/1.5A DC). Although official manufacturer documentation specifies an 802.3at (PoE+) power requirement and says that 802.3af is NOT supported, European region models operate stably on standard 802.3af PoE without experiencing brownouts, typically drawing up to 12W under full load. If both ports are wired into a PoE switch, only one port is used for PoE and data, while the other port is only used for data. If 12V DC adapter is plugged in, neither port is used for PoE handshake. Power consumption via PoE is up to 18W for the US version and up to 14.4W for the EU version. The Deco X50-PoE can only receive power through its PoE port. It cannot supply PoE power to other devices.

Flashing

Flashing OpenWrt

Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Support started version: external image
Current supported version: snapshot
Image too big: snapshot
WLAN Hardware: MediaTek MT7976 (DBDC)
Installation method(s):
U-Boot TFTP recovery
Recovery method(s):
U-Boot TFTP recovery

Please insert instructions here

Test build available on github: https://github.com/ey3ball/openwrt/releases/tag/openwrt-x50-poe-v2-build1

Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=TP-LINK_Deco_X50-PoE_(v2.0)&oldid=539011"