TP-LINK EAP265 HD v1
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac (AC1750) | |
|---|---|
| AC1750 Wireless MU-MIMO Gigabit Ceiling Mount Access Point | |
|
| |
| Homepage | Product page |
| Wikipedia | TP-Link |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | TP-LINK EAP265 HD v1 |
| FCC ID | TE7EAP265HD |
| Type | access point |
| CPU1 | Qualcomm Atheros QCA9563 |
| CPU1 Type | MIPS 74Kc |
| CPU1 Speed | 775 MHz |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI NOR) |
| RAM1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Qualcomm Atheros QCA9563 |
| Switch | Qualcomm Atheros QCA8337N |
| Ethernet Port Count | 2-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Stock bootloader | U-Boot |
| Expansion IF types | none specified |
| PoE | 802.3af, standard |
| Power | 48 VDC, ? A |
| Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Retail | |
| FCC approval date | 24 July 2020 |
| Radio 1 | |
| Chip1 | Qualcomm Atheros QCA9563 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 3x3:3 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 450 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
| Radio 2 | |
| Chip1 | Qualcomm Atheros QCA9982 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 3x3:3 |
| Wireless Standard | IEEE 802.11a/n/ac |
| 802.11ac | up to 1300 Mbps |
| 802.11n | up to 450 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 5 GHz |
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented TP-LINK devices with specifications, see TP-LINK.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
OpenWrt Target: ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 22.03.0
Current supported version: 24.10.4
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 22.03.0
Current supported version: 24.10.4
LAN Hardware: Qualcomm Atheros QCA8337N
WLAN Hardware: Qualcomm Atheros QCA9563, Qualcomm Atheros QCA9982
WLAN Comment: 2.4Ghz 3x3:3 MIMO, 5Ghz 3x3:3 MIMO
Comment:
Rebranded EAP245v3, identical hardware-wise
WLAN Hardware: Qualcomm Atheros QCA9563, Qualcomm Atheros QCA9982
WLAN Comment: 2.4Ghz 3x3:3 MIMO, 5Ghz 3x3:3 MIMO
Comment:
Rebranded EAP245v3, identical hardware-wise
Please insert instructions here
Categories:
- TP-LINK
- Embedded system/access point
- Embedded System Qualcomm Atheros
- Embedded System QCA9563
- Qualcomm Atheros
- Embedded System MIPS 74Kc
- Embedded System
- Embedded System QCA8337N
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System QCA9982
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation