TP-LINK TL-MR6400 v5
From TechInfoDepot
Jump to navigationJump to search
| bgn (N300) | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 300 Mbps Wireless N 4G LTE Router | |||||||||||||||||
 | |||||||||||||||||
| Homepage | Product page | ||||||||||||||||
| Wikipedia | TP-Link | ||||||||||||||||
| 3rd Party Firmware | |||||||||||||||||
| dd-wrt | Status Unknown | ||||||||||||||||
| OpenWrt | Supported | ||||||||||||||||
| Tomato any flavor | Incompatible | ||||||||||||||||
| Gargoyle | Status Unknown | ||||||||||||||||
| Platform | |||||||||||||||||
| Brand • Model • Rev | TP-LINK TL-MR6400 v5 | ||||||||||||||||
| FCC ID | none specified | ||||||||||||||||
| Type | wireless router | ||||||||||||||||
CPU1  | MediaTek MT7628N | ||||||||||||||||
| CPU1 Type | MIPS 24KEc | ||||||||||||||||
| CPU1 Speed | 580 MHz 32-bit | ||||||||||||||||
| Flash1 Chip | Winbond W25Q64JVS | ||||||||||||||||
| Flash1 Size | 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||||||
| RAM1 Size | 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||||||||||||
| RAM1 Chip | ESMT M14D5121632A | ||||||||||||||||
| ETH chip1 | MediaTek MT7628N | ||||||||||||||||
| Switch | MediaTek MT7628N | ||||||||||||||||
| Ethernet Port Count | 4-100MbE-LAN | ||||||||||||||||
| Wired Standard | IEEE 802.3i/3u | ||||||||||||||||
|
802dot11 OUI: none specified | |||||||||||||||||
| Stock bootloader | U-Boot | ||||||||||||||||
| Expansion IF types | none specified | ||||||||||||||||
| Power | 9 VDC, 0.85 A | ||||||||||||||||
| Connector type | barrel | ||||||||||||||||
| Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) | ||||||||||||||||
|
Flags: | |||||||||||||||||
|
| |||||||||||||||||
| Other | |||||||||||||||||
|
| |||||||||||||||||
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||||||||||||||
| Radio 1 | |||||||||||||||||
| Chip1 | MediaTek MT7628N | ||||||||||||||||
| Wireless interface OUI | none specified | ||||||||||||||||
| Antenna Connector Type | none specified | ||||||||||||||||
| MIMO status | 2x2:2 | ||||||||||||||||
| Wireless Standard | IEEE 802.11b/g/n | ||||||||||||||||
| 802.11n | up to 300 Mbps | ||||||||||||||||
| 802.11g | up to 54 Mbps | ||||||||||||||||
| 802.11b | up to 11 Mbps | ||||||||||||||||
| WiFi Operating Frequency | 2.4 GHz | ||||||||||||||||
| |||||||||||||||||
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented TP-LINK devices with specifications, see TP-LINK.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
Target: ramips
Subtarget: mt76x8
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 21.02.0
Current supported version: 25.12.2
Subtarget: mt76x8
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 21.02.0
Current supported version: 25.12.2
LAN Hardware: MediaTek MT7628N
WLAN Hardware: MediaTek MT7628N
WLAN Comment: MIMO 2x2:2
Installation method(s):
U-Boot TFTP recovery, see git-commit
Recovery method(s):
U-Boot TFTP recovery
WLAN Hardware: MediaTek MT7628N
WLAN Comment: MIMO 2x2:2
Installation method(s):
U-Boot TFTP recovery, see git-commit
Recovery method(s):
U-Boot TFTP recovery
| git • >> |
|---|
ramips: add support for TP-Link MR6400 v5 TL-MR6400v5 is very similar to TL-MR6400v4. Main differences are: - smaller form factor - different LED GPIOs - different switch connections You can flash via tftp recovery: - serve tftp-recovery image as /tp_recovery.bin on 192.168.0.225/24 - connect to any ethernet port - power on the device while holding the reset button - wait at least 8 seconds before releasing reset button Flashing via OEM web interface does not work. LTE module does not support DHCP so it must be configured via QMI. Hardware Specification (v5.0 EU): - SoC: MT7628NN - Flash: Winbond W25Q64JVS (8MiB) - RAM: ESMT M14D5121632A (64MiB) - Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna) - Ethernet: 1NIC (4x100M) - WWAN: TP-LINK LTE MODULE (2x external detachable antenna) - Power: DC 9V 0.85A |
