TP-LINK TL-XTR8488

From TechInfoDepot
Jump to navigationJump to search
abgn+ac+ax (AX8400)
Turbo AX8400 Triple Band Gigabit Wireless Router
Homepage Product page (CN)
Wikipedia TP-Link
WikiDevi.wi-cat.ru TP-LINK TL-XTR8488
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
BrandModelRev TP-LINK TL-XTR8488 Turbo v1
FCC ID (fcc.io) none specified
FCC ID (fcc.report) none specified
Type wireless router
CPU1 checkY MediaTek MT7986AV
CPU1 Type ARM Cortex-A53
CPU1 Speed 2.0 GHz ( 4 cores ) 64-bit
Flash1 Chip ESMT F50L1G41LB
Flash1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND)
RAM1 Size 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br />
RAM1 Chip Micron MT40A512M16TB-062ER
ETH chip1 MediaTek MT7986AV
ETH chip2 Realtek RTL8221B
ETH chip3 Realtek RTL8221B
Switch MediaTek MT7531AE
Ethernet Port Count 1-2.5GbE-WAN
3-1GbE x 1-2.5GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab/3bz

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types USB 3.0
USB ports 1
USB Hub Compatible Untested
Power 12 VDC, 5 A
Connector type barrel

Flags:
Wi-Fi 6, heatsink

Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
Country of manuf China
Radio 1
Chip1 MediaTek MT7986AV
Chip2 MediaTek MT7976GN
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 4x4:4
Wireless Standard IEEE 802.11b/g/n/ax
802.11ax up to 1148 Mbps
802.11n up to 600 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 MediaTek MT7986AV
Chip2 MediaTek MT7976AN
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 4x4:4
Wireless Standard IEEE 802.11a/n/ac/ax
AX-QAM up to 4804 Mbps
802.11ax up to 2402 Mbps
802.11ac up to 1733 Mbps
802.11n up to 600 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5.2 GHz
Radio 3
Chip1 MediaTek MT7915AN
Chip2 MediaTek MT7975AN
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 4x4:4
Wireless Standard IEEE 802.11a/n/ac/ax
802.11ax up to 2402 Mbps
802.11ac up to 1733 Mbps
802.11n up to 600 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5.8 GHz

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented TP-LINK devices with specifications, see TP-LINK.

4804 Mbps - 4SS 5.8GHz 802.11ax (160MHz chan., 1024-QAM),
2402 Mbps - 4SS 5.2GHz 802.11ax (80MHz chan., 1024-QAM),
1148 Mbps - 4SS 2.4GHz 802.11ax (40MHz chan., 256-QAM) = AX8400 class

Overview

Flashing

Flashing OpenWrt

Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 24.10.0
Current supported version: 25.12.2
LAN Hardware: MediaTek MT7986AV
WLAN Hardware: MediaTek MT7976GN, MediaTek MT7976AN, MediaTek MT7915AN, MediaTek MT7975AN
WLAN Comment: 2.4GHz AX: 4x4 40Mhz, 5GHz1 AX: 4x4 80Mhz, 5GHz2 AX: 4x4 160Mhz
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
git • >>
mediatek: add support for TP-Link TL-XTR8488
Hardware specification:
  SoC: MediaTek MT7986A 4x A53
  Flash: ESMT F50L1G41LB 128MB
  RAM: MT40A512M16TB-062ER 1GB
  Ethernet: 2x 2.5G, 4x 1G Lan
  WiFi1: MT7976GN 2.4GHz 4T4R
  WiFi2: MT7976AN 5.2GHz 4T4R
  WiFi3: MT7915AN 5.8GHz 4T4R
  Button: Reset, WPS, Turbo
  USB: 1 x USB 3.0
  Power: DC 12V 5A

Flash instructions:
  1. Execute the following operation to open nc shell:
     https://openwrt.org/inbox/toh/tp-link/xdr-6086#rooting
  2. Replace the stock bootloader to OpenWrt's:
     dd bs=131072 conv=sync of=/dev/mtdblock9 if=/tmp/xxx-preloader.bin
     dd bs=131072 conv=sync of=/dev/mtdblock9 seek=28 if=/tmp/xxx-bl31-uboot.fip
  3. Connect to your PC via the Gigabit port of the router,
     set a static ip on the ethernet interface of your PC.
  4. Download the initramfs image, and restart the router,
     waiting for tftp recovery to complete.
  5. After openwrt boots up, perform sysupgrade.