Teltonika RUTC50
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac+ax (AX3000) | |
|---|---|
| 5G POWERHOUSE WITH WI-FI 6 | |
|
| |
| Homepage | Product page |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Teltonika RUTC50 |
| FCC ID (fcc.io) | none specified |
| FCC ID (fcc.report) | none specified |
| Type | wireless router |
| CPU1 | MediaTek MT7981A |
| CPU1 Type | ARM Cortex-A53 |
| CPU1 Speed | 1.3 GHz ( 2 cores ) 64-bit |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (NAND) |
| Flash2 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI NOR) |
| RAM1 Size | 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | MediaTek MT7981A |
| Switch | MediaTek MT7531 |
| Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Stock bootloader | U-Boot |
| Expansion IF types | USB 2.0 |
| USB ports | 2 |
| USB Hub Compatible | Untested |
| Power | 9-50 VDC, ? A |
| Connector type | 4-pin socket |
|
Flags: | |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Radio 1 | |
| Chip1 | MediaTek MT7981A |
| Chip2 | MediaTek MT7976C |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x3:2 |
| Wireless Standard | IEEE 802.11b/g/n/ax |
| 802.11ax | up to 574 Mbps |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
| Radio 2 | |
| Chip1 | MediaTek MT7981A |
| Chip2 | MediaTek MT7976C |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x3:2 |
| Wireless Standard | IEEE 802.11a/n/ac/ax |
| AX-QAM | up to 2402 Mbps |
| 802.11ax | up to 1201 Mbps |
| 802.11ac | up to 867 Mbps |
| 802.11n | up to 300 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 5 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 25.12.0
Current supported version: 25.12.2
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 25.12.0
Current supported version: 25.12.2
LAN Hardware: MediaTek MT7531
LAN Comment: Quectel RG520N-EB 5G R16 modem
WLAN Hardware: MediaTek MT7981A, MediaTek MT7976C
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
Comment:
IP30 Ingress Protection, Industrial rated
LAN Comment: Quectel RG520N-EB 5G R16 modem
WLAN Hardware: MediaTek MT7981A, MediaTek MT7976C
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
Comment:
IP30 Ingress Protection, Industrial rated
| git • >> |
|---|
mediatek: filogic: add Teltonika RUTC50 support Specification: - MediaTek MT7981A SoC - 512 MB RAM - 16MB SPI NOR Flash - 512MB NAND (split in half for firmware fallback) - 5x 10/100/1000 Mbps Ethernet, with passive PoE support on LAN1 - WLAN : MediaTek dual-band WiFi 6 - 2.4 GHz : b/g/n/ax, MIMO 2x2 - 5 GHz : a/n/ac/ax, MIMO 2x2 - Quectel RG520N-EB 5G R16 modem - 2.0 USB Type-A HOST port - 1x Digital input - 1x Digital output - 2x SIM slot (can be swapped via AT commands) GPIO: - 1 button (Reset) - 13 LEDs (power, 4x WAN status, Wifi 2G, Wifi 5G, 3G, 4G, 5G, RSSI 1,2,3) - 3 Modem control (power button, reset, status) - 1 USB reset - 1 Digital input - 1 Digital output Flashing via OEM WebUI: 1. Download the firmware image *-squashfs-factory.bin 2. Upload firmware image via OEM WebUI firmware update, do not keep settings To revert back to OEM firmware: https://wiki.teltonika-networks.com/view/Bootloader_menu Use "ModemManager" to establish mobile data connection. |
Categories:
- Teltonika
- Embedded system/wireless router
- Embedded System MediaTek
- Embedded System MT7981A
- MediaTek
- Embedded System ARM
- Embedded System Cortex-A53
- Embedded System MT7531
- OpenWrt Supported
- Embedded System MT7976C
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation