Teltonika TSW202
From TechInfoDepot
Jump to navigationJump to search
| MANAGED PoE+ ETHERNET SWITCH | |
 | |
| Homepage | Product page |
|---|---|
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | Teltonika TSW202 |
CPU1  | Realtek RTL8380M |
| CPU1 Type | MIPS 4KEc |
| CPU1 Speed | 500 MHz |
| Flash1 Chip | Winbond W25Q80RV |
| Flash1 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI NOR) |
| Flash2 Size | 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Serial) |
| RAM1 Size | 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Chip | Winbond W631GG8NB 151 |
| ETH chip1 | Realtek RTL8380M |
| Switch | Realtek RTL8380M |
| Ethernet Port Count | 8-1GbE |
| Ethernet connector | unspecified |
| Wired Standard | IEEE 802.3i/3u/3ab |
| Auto-MDIX | unspecified |
| Switch Class | managed |
|
Ethernet OUI: none specified | |
| Expansion IF types | SFP slots |
| SFP ports | 2 |
| PoE | 802.3at, 802.3af, standard |
| Power | 48-54 VDC, ? A |
| Connector type | barrel |
|
| |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: ramips
Subtarget: mt7621
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 25.12.0
Current supported version: 25.12.4
Image too big: 25.12.4
Subtarget: mt7621
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 25.12.0
Current supported version: 25.12.4
Image too big: 25.12.4
LAN Hardware: MediaTek MT7621AT
WLAN Hardware: MediaTek MT7975DN, MediaTek MT7905DAN
Installation method(s):
U-Boot web recovery
WLAN Hardware: MediaTek MT7975DN, MediaTek MT7905DAN
Installation method(s):
U-Boot web recovery
| git • >> |
|---|
realtek: support Teltonika TSW202
Add support for TSW202 PoE switch. This is an RTL8380 based switch
with two SFP slots, and 8 PoE 802.3af one every RJ-45 port.
The max budget is 240W.
The vendor firmware configures the PSE
with a per-port budget of 30.0W.
Specifications:
---------------
* SoC: Realtek RTL8380M
* Flash: 16 MiB SPI NOR W25Q80RV, 8Mb_Serial_Flash, low_power
* RAM: 128 MiB Winbond W631GG8NB 151
* Ethernet: 8x 10/100/1000 Mbps with PoE
2x SFP slots
* Buttons: 1 "Reset" button on front panel
* Power: 48V-54V DC barrel jack
* UART: 1 serial header with terminal on the back side.
With ground, rx, tx, and 3.3V
* PoE: 2 XS2184
* LED: 2 i2c SL74HC164
Works:
------
- (8) RJ-45 ethernet ports
- (2) SFP with ethernet or fiber
- Switch functions
TODO:
------
- LEDs are always on
- Power-over-Ethernet are always on
Install via web interface:
-------------------------
The openwrt firmware will not accept and flash the sysupgrade image.
It is recommended to flash with sysupgrade -n -f over ssh.
Dokumantation, Bootlogs, and Fotos can be found on
https://git.f2a.space/patrick/openwrt-24.10-tsw202/-/wikis/home
Signed-off-by: Patrick Grimm
Link: https://github.com/openwrt/openwrt/pull/21003
Signed-off-by: Jonas Jelonek
|
