Tenda AC15

abgn+ac (AC1900)
AC1900 Smart Dual Band Gigabit WiFi Router
Homepage	Product page
WikiDevi.wi-cat.ru	Tenda AC15
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Supported
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Tenda AC15
FCC ID	V7TAC15
Board ID	10025031
Type	wireless router
CPU1	Broadcom BCM4708A0
CPU1 Type	ARM Cortex-A9
CPU1 Speed	800 MHz ( 2 cores )
Flash1 Chip	Winbond GD25Q128
Flash1 Size	16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Serial(SPI))
RAM1 Size	128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (DDR3 SDRAM)
RAM1 Chip	EtronTech EM6GC16EWXD-12H
ETH chip1	Broadcom BCM4708A0
Switch	Broadcom BCM4708A0
Ethernet Port Count	1-1GbE-WAN 3-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Stock bootloader	CFE
Stock FW OS	Linux
Expansion IF types	USB 3.0
USB ports	1
USB Hub Compatible	Untested
Power	12 VDC, 2.5 A
Connector type	barrel
Serial Port (UART)	yes, 4-pin header, (115200 8N1)
Flags: high power
Additional chips 2.4GHz Power Amplifier IC;Richwave;RTC6649E;;3; 5GHz WLAN Front End Module;Skyworks;SKY85710-11;;3;
Other
Default IP address: 192.168.0.1 the IP 192.168.0.1 is used by 799 additional devices of which 57 are Tenda devices
Manuf/OEM/ODM	Tenda
3rd Party Firmware Support	FreshTomato • (List | DLs)
Retail
FCC approval date	20 August 2015
UPC	885397270379 (UPC DB, On eBay)
Newegg	N82E16833555059
ASIN	B0143HBZMW
Country of manuf	China
Radio 1
Chip1	Broadcom BCM4360
Wireless interface OUI	none specified
Antenna Connector Type	U.FL
MIMO status	3x3:3
Wireless Standard	IEEE 802.11b/g/n
N-QAM	up to 600 Mbps
802.11n	up to 450 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio cor_rev	40
Radio 2
Chip1	Broadcom BCM4360
Wireless interface OUI	none specified
Antenna Connector Type	U.FL
MIMO status	3x3:3
Wireless Standard	IEEE 802.11a/n/ac
802.11ac	up to 1300 Mbps
N-QAM	up to 600 Mbps
802.11n	up to 450 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
Radio cor_rev	40

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Tenda device with specifications, see Tenda.

• 1300 Mbps - 3SS 5GHz 802.11ac (80MHz chan.),

• 600 Mbps - 3SS 2.4GHz 802.11n (40MHz chan., 256-QAM) = AC1900 class

Overview

"10025031" and "V1.1" is silkscreened on the board.

See also: List of Tenda Wireless Devices

RAM Specs

• EtronTech DDR3 SDRAM Spec.

EM6GC16EWXD - 128MB (64M x16)

EM6GE16EWXD - 512MB (256M x16)

Links of Interest

• Tenda AC15 (AC1900) - Tomato firmware support on linksysinfo.org

Reviews

• Tenda AC15 reviewed on SmallNetBuilder

Flashing

Flashing Tomato

https://www.linksysinfo.org/index.php?threads/tenda-ac15-ac1900-tomato-firmware-support.71709/post-268806

As of July 2017, the Tenda AC15 is supported by Fresh Tomato (download available here, go to the latest year -> the latest version -> K26ARM -> Tenda AC15). Many thanks to @kille72 and @marto12 for their hard work adding Tomato firmware support for this excellent router! There was a bug: Tomato can't seem to turn on the power amplifiers for the 5 GHz WiFi, which means that the signal strength is down -25 dB from expected (that's a measly 5.6% full power!). As of May 2020, this bug has been fixed.

To upgrade the firmware to Tomato (or restore the firmware back to Tenda OEM), you will need to use the router's CFE, because the two platforms use a different firmware format and will not accept each other's firmware files for an upgrade. Basically, you will need to:

1. Connect an Ethernet cable between your PC and port 1 on the router.
2. Set your PC to use a static IP address of 192.168.0.2 (instructions are here if you need them).
3. If the router is on, turn it off. Find the reset hole at the top of the router and insert a paperclip to hold the reset button down. While holding reset down, power the router on.
4. After about 25-30 seconds, the right-most LED (with the gear/settings symbol) should turn on. If it doesn't, you probably didn't hold the reset button down the whole time; go back to step 3 and try again.
5. Release the reset button and go to your PC.
6. Open http://192.168.0.1/ in a web browser to pull up the CFE screen.
7. Use the CFE screen to upload the desired firmware binary file (Tomato or OEM). Some browsers may timeout before the firmware is fully loaded, and you'll get an error message instead of a message saying that the router is rebooting; just go back to step 6. If it fails again, perhaps try with Internet Explorer.
8. Give the router about five minutes to upload, flash and reboot. It will look like nothing is happening. When the router reboots, all the lights will flash briefly. Once Tomato is up and running, the two WiFi LEDs will light up on the front of the router.
9. At this point, click the Continue link (or reopen http://192.168.0.1/ in your web browser) to configure your new firmware. Default username and password are root & admin.
10. As the Tenda settings are incompatible with Tomato, go to Administration -> Configuration -> Restore Default Configuration, select Erase all data in NVRAM memory and click [OK].
11. Don't forget to re-set your PC to get its IP automatically when you're done! (Undo step 2.)

JTAG-Serial Info

Serial

Boot log

Digital core power voltage set to 0.9375V Decompressing...done Digital core power voltage set to 0.9375V SHMOO VER 1.13 PKID07DC06011801080000000000001A103F01000000 S300001D3 00001340 RDLYW0 00000004 RDENW0 00000030 RDQSW0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++---------- 01 ------++++++++++++++++++++++++++X+++++++++++++++++++++++++------ 02 ------++++++++++++++++++++++++++X+++++++++++++++++++++++++------ 03 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++--------- 04 -++++++++++++++++++++++++X++++++++++++++++++++++++-------------- 05 ----+++++++++++++++++++++++++X++++++++++++++++++++++++---------- 06 --++++++++++++++++++++++++X+++++++++++++++++++++++-------------- 07 -----+++++++++++++++++++++++++X++++++++++++++++++++++++--------- 08 ---++++++++++++++++++++++++X++++++++++++++++++++++++------------ 09 --------+++++++++++++++++++++++++X++++++++++++++++++++++++------ 10 ---+++++++++++++++++++++++++X++++++++++++++++++++++++----------- 11 ------++++++++++++++++++++++++X+++++++++++++++++++++++---------- 12 ---++++++++++++++++++++++++X++++++++++++++++++++++++------------ 13 -------++++++++++++++++++++++++X++++++++++++++++++++++++-------- 14 ---+++++++++++++++++++++++++X++++++++++++++++++++++++----------- 15 ------++++++++++++++++++++++++X++++++++++++++++++++++++--------- PW0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 --++++++++++++++++++++++++++X+++++++++++++++++++++++++---------- 01 -----++++++++++++++++++++++++++X++++++++++++++++++++++++++------ 02 ----++++++++++++++++++++++++++X++++++++++++++++++++++++++------- 03 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++--------- 04 +++++++++++++++++++++++++X++++++++++++++++++++++++-------------- 05 ----+++++++++++++++++++++++++X++++++++++++++++++++++++---------- 06 +++++++++++++++++++++++++X++++++++++++++++++++++++-------------- 07 -----++++++++++++++++++++++++++X+++++++++++++++++++++++++------- 08 ++++++++++++++++++++++++++X+++++++++++++++++++++++++------------ 09 ------++++++++++++++++++++++++++X+++++++++++++++++++++++++------ 10 ++++++++++++++++++++++++++X++++++++++++++++++++++++++----------- 11 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++---------- 12 --+++++++++++++++++++++++++X++++++++++++++++++++++++------------ 13 -----+++++++++++++++++++++++++X++++++++++++++++++++++++--------- 14 -+++++++++++++++++++++++++X+++++++++++++++++++++++++------------ 15 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++--------- NW0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 ---++++++++++++++++++++++++++X+++++++++++++++++++++++++--------- 01 ------++++++++++++++++++++++++++X+++++++++++++++++++++++++------ 02 -----+-++++++++++++++++++++++++++X+++++++++++++++++++++++++----- 03 ----++++++++++++++++++++++++++X++++++++++++++++++++++++++------- 04 +++++++++++++++++++++++++X++++++++++++++++++++++++-------------- 05 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++--------- 06 --+++++++++++++++++++++++++X++++++++++++++++++++++++------------ 07 -----+++++++++++++++++++++++++X++++++++++++++++++++++++--------- 08 ---+++++++++++++++++++++++++X++++++++++++++++++++++++----------- 09 -------++++++++++++++++++++++++++X++++++++++++++++++++++++++---- 10 ----+++++++++++++++++++++++++X++++++++++++++++++++++++---------- 11 ------++++++++++++++++++++++++++X++++++++++++++++++++++++++----- 12 ----+++++++++++++++++++++++++X++++++++++++++++++++++++---------- 13 ------++++++++++++++++++++++++++X+++++++++++++++++++++++++------ 14 ---+++++++++++++++++++++++++X++++++++++++++++++++++++----------- 15 -----++++++++++++++++++++++++++X+++++++++++++++++++++++++------- WRDQW0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 +++++++++++++++++++++X+++++++++++++++++++++-----------+++++++++- 01 +++++++++++++++++++++++X+++++++++++++++++++++++----------++++++- 02 +++++++++++++++++++++++X++++++++++++++++++++++---------++++++++- 03 ++++++++++++++++++++++X+++++++++++++++++++++------------+++++++- 04 ++++++++++++++++++++X++++++++++++++++++++------------++++++++++- 05 ++++++++++++++++++++++X+++++++++++++++++++++-----------++++++++- 06 ++++++++++++++++++++X++++++++++++++++++++------------++++++++++- 07 ++++++++++++++++++++++X++++++++++++++++++++++-----------+++++++- 08 ++++++++++++++++++++++X+++++++++++++++++++++-----------++++++++- 09 ---++++++++++++++++++++++X+++++++++++++++++++++---------------+- 10 +++++++++++++++++++++++X+++++++++++++++++++++++----------++++++- 11 -+++++++++++++++++++++++X+++++++++++++++++++++++------------+++- 12 ++++++++++++++++++++++X++++++++++++++++++++++----------++++++++- 13 --++++++++++++++++++++++X++++++++++++++++++++++------------++++- 14 +++++++++++++++++++++++X++++++++++++++++++++++----------+++++++- 15 -+++++++++++++++++++++++X++++++++++++++++++++++-------------+++- WRDMW0 00000021 WRDMW0 00000023 ADDR 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 +++++++++++++++++++S+++++++++++X++++++++++++++++++++++++++++++++ Decompressing...done CJ++ for mspi get id 0xc8 0x17 CJ++ for mspi get id 0xc8 0x17 Found a ST compatible (Micron) serial flash with 256 64KB blocks; total size 16MB CFE version 6.37.14.93 (r469350) based on BBP 1.0.37 for BCM947XX (32bit,SP,) Build Date: Tue Jul 21 11:41:28 CST 2015 (root@localhost.localdomain) Copyright (C) 2000-2008 Broadcom Corporation. Init Arena Init Devs. Boot partition size = 262144(0x40000) Can't find nandflash! ccrev = 42, chipst= 0 DDR Clock: 666 MHz Warning: using legacy sdram_ncdl parameter to set DDR frequency. Equivalent setting in clkfreq=800,*0* will be ignored. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.93 (r469350) CPU type 0x0: 800MHz Tot mem: 131072 KBytes CFE mem: 0x00F00000 - 0x017A81D4 (9077204) Data: 0x00F5F588 - 0x00F60C30 (5800) BSS: 0x00F60C40 - 0x00FA61D4 (284052) Heap: 0x00FA61D4 - 0x017A61D4 (8388608) Stack: 0x017A61D4 - 0x017A81D4 (8192) Text: 0x00F00000 - 0x00F53780 (341888) Boot: 0x017A9000 - 0x017E9000 Reloc: I:00000000 - D:00000000 Mac:**-**-**-**-**-** Device eth0: hwaddr **-**-**-**-**-**, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set upgrade wait time is 3s **upgrade_wait over! Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: .... 4114848 bytes read Entry at 0x00008000 Closing network. Starting program at 0x00008000 console [ttyS0] enabled, bootconsole disabled serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550 brd: module loaded loop: module loaded pflash: found no supported devices bcmsflash: squash filesystem found at block 29 Creating 8 MTD partitions on "bcmsflash": 0x000000000000-0x000001000000 : "All" 0x000000000000-0x000000040000 : "Bootloader" 0x000000040000-0x000000fc0000 : "KernelFS" 0x0000001d8cdc-0x000000fc0000 : "RootFS" 0x000000fc0000-0x000000fd0000 : "Policy" 0x000000fd0000-0x000000fe0000 : "CFM_BACKUP" 0x000000fe0000-0x000000ff0000 : "CFM" 0x000000ff0000-0x000001000000 : "nvram" nflash: found no supported devices PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 u32 classifier Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (1961 buckets, 7844 max) [BM CORE ] INFO: online ip data hash table created, size = 199 [BM CORE ] INFO: online_ip proc file created ctnetlink v0.93: registering with nfnetlink. create /proc/behavior/emailbcc SUCCESSFULLY. netfilter smtp init successfully xt_time: kernel timezone is -0000 Kernel:Init flow dev success. IPv4 over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 L2TP core driver, V2.0 PPPoL2TP kernel driver, V2.0 L2TP IP encapsulation support (L2TPv3) L2TP netlink interface L2TP ethernet pseudowire support (L2TPv3) 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012 brcmnand: found no supported devices VFS: Mounted root (squashfs filesystem) readonly on device 31:3. devtmpfs: mounted Freeing init memory: 216K mkdir: can't create directory '/var/run': File exists _fastnat_attach: fastnat attach is successful register. fastnat_init: FastNat_init successful . [BM CORE ] INFO: bm_init success bm_debug_init_proc success! [U2K MODULE ] INFO: bm_u2k_info_init success insmod: can't read '/lib/modules/ai.ko': No such file or directory [MAC FILTER ] INFO: bm_mac_filter init success [QOS ] INFO: qos module init success OS TYPE INIT FINISHED [URL FILTER ] INFO: url filter init success Give root password for system maintenance (or type Control-D for normal startup):init_core_dump 1784: rlim_cur = 0, rlim_max = -1 init_core_dump 1794: open core dump success init_core_dump 1803: rlim_cur = 5120, rlim_max = 5120 func:InitCfm begin load_mib.... flash_read:ret = 65536 crc = 7449093c, newcrc = 7449093c ######## STARTING PROGRAM ######### flash_read:ret = 65536 crc = 85006fc3, newcrc = 85006fc3 flash_read:ret = 65536 crc = 85006fc3, newcrc = 85006fc3 MTD[Policy] size is 64K read flash:uncompress len=240468; crc=0a2959c2 left wan[0]:0 right lan[3]:1 right lan[2]:2 right lan[1]:3 right lan[0]:4 vlan_array[0]: value 1 index_num 1 index[0] 0 index[1] 0 index[2] 0 index[3] 0 index[4] 0 vlan_array[1]: value 0 index_num 4 index[0] 1 index[1] 2 index[2] 3 index[3] 4 index[4] 0 vlan_array[2]: value -2 index_num 0 index[0] 0 index[1] 0 index[2] 0 index[3] 0 index[4] 0 vlan_array[3]: value -2 index_num 0 index[0] 0 index[1] 0 index[2] 0 index[3] 0 index[4] 0 vlan_array[4]: value -2 index_num 0 index[0] 0 index[1] 0 index[2] 0 index[3] 0 index[4] 0 nvram unset vlan1ports nvram unset vlan2ports nvram unset vlan3ports nvram unset vlan4ports nvram unset vlan5ports nvram set vlan2ports="0 5" nvram set vlan1ports="1 2 3 4 5*" #IPTV STB VLAN ID mode is disable!# main=>100:init server success.1.. No need to start gpio thread. et_module_init: passivemode set to 0x0 et_module_init: txworkq set to 0x1 et_module_init: et_txq_thresh set to 0x0 stbport=4= eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.93 (r469350) wl_module_init: passivemode set to 0x0 wl_module_init: txworkq set to 0x1 srom rev:0 --td_phy_status_init-- eth1: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.93 (r469350 WLTEST) srom rev:0 --td_phy_status_init-- eth2: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.93 (r469350 WLTEST) insmod: can't read '/lib/modules/2.6.36.4brcmarm/kernel/drivers/usb/class/usblp.ko': No such file or directory Hello,This is the USB LED handling Driver >>si_gpioreserve : 0xffffffff >>si_gpiocontrol : 0x0 >>si_gpioouten : 0x4645 >>si_gpioout : 0x4600 ifconfig: SIOCSIFHWADDR: No such device ifconfig: SIOCGIFFLAGS: No such device ### set br0 mac [**:**:**:**:**:**]### [5] ##############add vlan devices [vconfig add eth0 2] ##############add vlan devices [vconfig add eth0 1] ifconfig: SIOCSIFHWADDR: No such device Sun May 1 00:00:00 UTC 2011 Loading dnrd... killall: dnrd: no process killed _eval 98: child process create success netctrl _eval 98: child process create success _start_time_check 202: time_check register success, register_pid = 509 _eval 94: child process status is 0 logserver.c check network 192.168.0.1 success _start_httpd 219: httpd register success, register_pid = 510 time_check _eval 94: child process status is 0 _start_multiwan 259: _start_multiwan register success, register_pid = 511 multiWAN httpd _eval 94: child process status is 0 _start_ucloud 288: ucloud register success, register_pid = 512 ucloud init_core_dump 1784: rlim_cur = 5120, rlim_max = 5120 init_core_dump 1794: open core dump success init_core_dump 1803: rlim_cur = 5120, rlim_max = 5120 �[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(51)]:�[m enable:1 �[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(52)]:�[m type:1 �[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(57)]:�[m wday_en:1;1;1;1;1;1;1 �[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(58)]:�[m start_time:03:00 �[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(59)]:�[m end_time:05:00 �[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(60)]:�[m max_speed:3 �[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(61)]:�[m check_speed=3000 �[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(62)]:�[m wan_ifnames:eth0.2 �[1;32m[TIMER_CHECK >>time_check_power_info_printf(48)]:�[m enable:0 �[1;32m[TIMER_CHECK >>time_check_power_info_printf(49)]:�[m type:1 �[1;32m[TIMER_CHECK >>time_check_power_info_printf(54)]:�[m wday_en:1;1;1;1;1;1;1 �[1;32m[TIMER_CHECK >>time_check_power_info_printf(55)]:�[m start_time:00:00 �[1;32m[TIMER_CHECK >>time_check_power_info_printf(56)]:�[m end_time:07:00 �[1;32m[TIMER_CHECK >>time_check_power_info_printf(57)]:�[m max_speed:3 �[1;32m[TIMER_CHECK >>time_check_power_info_printf(58)]:�[m check_speed=3000 init_core_dump 1784: rlim_cur = 5120, rlim_max = 5120 init_core_dump 1794: open core dump success init_core_dump 1803: rlim_cur = 5120, rlim_max = 5120 init_core_dump 1784: rlim_cur = 5120, rlim_max = 5120 init_core_dump 1794: open core dump success init_core_dump 1803: rlim_cur = 5120, rlim_max = 5120 Yes: ****** WeLoveLinux****** Welcome to ... old - soft: 5120, hard: 5120 old - soft: 4096000, hard: -1 not need to write flash,crc:[3b152f3c] commit cfm failed or not need write flash ######## RECEIVING DATA ######### RTNETLINK answers: Operation not supported sh: can't create /proc/br0_ip: nonexistent directory [httpd][debug]----------------------------webs.c,157 httpd listen ip = 192.168.0.1 port = 80 webs: Listening for HTTP requests at address 192.168.0.1 max_new_conntrack=4000 sh: nkgw: not found Notice: caching turned off Debug->tpi_port.c: tpi_port_handle(61)--type = 0 Debug->tpi_port.c: tpi_port_mode_set(12)--wan_num=1 Debug->tpi_port.c: tpi_port_mode_set(14)--wan[0].portmode=0 set port 0 to AUTO �[1;32m[ DEBUG ] �[m******Sucessed to change lan config! ****** iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `dmz_forward_pre':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `vpnserver':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `dmz_forward_post':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: Index of insertion too big. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `port_forward_pre':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables v1.4.12.2: Couldn't load target `port_forward_post':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `web_wanadmin':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `web_wanadmin':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. killall: 3322ip: no process killed killall: 88ip: no process killed killall: gnway: no process killed killall: phddns: no process killed killall: inadyn: no process killed rm: can't remove '/etc/ddns_*': No such file or directory iptables: No chain/target/match by that name. nbns task start: arp task satrt: iptables v1.4.12.2: Couldn't load target `MINIUPNPD':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. miniupnpd.c,865,ver=1.0,osname=Wireless Router,osver=1.0,osurl=http://192.168.0.1,manuft=Tenda,descri= RTNETLINK answers: No such file or directory dhcpsCfgToStruct 491: lan type is dhcps_lan_dhcpc_configure 251: lan dhcp client not get ip Init gsbmac dev success. The ARP attack defence is init v1 successful killall: arpbrocast: no process killed Kernel:Init attack fence dev success. the ddos ip attack defnence init successful SET_LAN_PARAM_DATA k_data: lan ip:3232235521 lan mask:4294967040 lan submask:3232235520 lan interface:br0 lan http port:80 icmset the proceee ture p iSET_IPOP_FENCE_ATTACK_DATA k_data: s 1 ip options:32512 ,15SET_BAD_PKT_FENCE_ATTACK_DATA k_data: 00, bad pkt:248 udpSET_DDOS_FENCE_ATTACK_DATA k_data: is status:7 1, tcp threshold:1500 150 udp threshold:1500 0,t icmp threshold:1500 cp_syn is 1,1500 ---------->>[ start_wifi, wl_rate=24 ] 37919788 �[1;31m[ ERROR ] �[minvalid access mode: killall: wps_monitor: no process killed killall: nas: no process killed killall: eapd: no process killed �[1;32m[ DEBUG ] �[mlen=1,lan1_ifnames = �[1;31m[ ERROR ] �[mDo not exsit ifname of guest_network,do nothing! iptables v1.4.12.2: Couldn't load target `icmp_drop':No such file or directory Try `iptables -h' or 'iptables --help' for more information. killall: acsd: no process killed iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. Error: argument "xmain" is wrong: invalid table ID Error: argument "xmain" is wrong: invalid table ID RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory RTNETLINK answers: No such file or directory iptables v1.4.12.2: Couldn't load target `access_ctrl':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. eth1: cmd=231: Invalid argument eth1: WLC_SET_VAR(chanspec): Invalid argument eth1: WLC_maxrssi=-100,int_val=-100 SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operatioset tenda auto width obss_coex:1 n not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(bg_rate): Operation not supported eth1: WLC_SET_VAR(a_rate): Operation not supported eth1: WLC_SET_VAR(bg_rate): Operation not supported eth1: WLC_SET_VAR(a_rate): Operation not supported eth1: WLC_SET_VAR(bg_mrate): Operation not supported eth1: WLC_SET_VAR(a_mrate): Operation not supported eth1: WLC_SET_VAR(bg_mrate): Operation not supported eth1: WLC_SET_VAR(a_mrate): Operation not supported eth1: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported eth1: cmd=64: Operation not supported eth2: WLC_GET_VAR(psta_if): Invalid argument eth2: WLC_GET_VAR(psta_if): Invalid argument eth2: WLC_GET_VAR(psta_if): Invalid argument �[1;32m[ DEBUG ] �[mlen=1,lan1_ifnames = �[1;31m[ ERROR ] �[mDo not exsit ifname of guest_network,do nothing! acsd: scan in progress ... acsd: scan in progress ... mdns task start: acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: selected channel spec: 0x1906 eth2: WLC_GET_VAR(bw_cap): Invalid argument ACSD >>acs_get_rs_info(1209): failed to get bw_capret code: -1 ACSD >>acs_build_scanlist(508): number of valid chanspec is 0 ACSD >>acs_scan_prep(588): failed to build scan chanspec listret code: -1 ACSD >>acs_run_cs_scan(682): failed to do scan prepret code: -1 ACSD >>acs_start(1655): cs scan failed ret code: -1 ACSD >>acs_init_run(2803): acs_start fwisp or APC is close ailed for ifname: eth2 [ Message ]------msgsnd--------[ ucloud ][ 721623, 65538 ] [ Message ]------msgsnd--------[ ucloud, 1 ] ---------->>[ start_wifi, wl_rate=5 ] [ Message ]------msgrcv--------[ ucloud ][ 721623 / 65538 ] [ Message ]------msghdl--------[ ucloud / 1 ] 37919788 �[1;31m[ ERROR ] �[minvalid access mode: �[1;31m[ ERROR ] �[mcoutry_code=US �[1;32m[ DEBUG ] �[mlen=1,lan1_ifnames = �[1;31m[ ERROR ] �[mDo not exsit ifname of guest_network,do nothing! eth2: cmd=231: Invalid argument eth2: WLC_SET_VAR(chanspec): Invalid argument eth2: WLmaxrssi=-100,int_val=-100 C_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(bg_rate): Operation not supported eth2: WLC_SET_VAR(a_rate): Operation not supported eth2: WLC_SET_VAR(bg_rate): Operation not supported eth2: WLC_SET_VAR(a_rate): Operation not supported eth2: WLC_SET_VAR(bg_mrate): Operation not supported eth2: WLC_SET_VAR(a_mrate): Operation not supported eth2: WLC_SET_VAR(bg_mrate): Operation not supported eth2: WLC_SET_VAR(a_mrate): Operation not supported eth2: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported eth2: cmd=64: Operation not supported device br1 already exists; can't create bridge with the same name �[1;32m[ DEBUG ] �[mlen=1,lan1_ifnames = �[1;31m[ ERROR ] �[mDo not exsit ifname of guest_network,do nothing! acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... ###fd failed to recv packet!### ##### NO SERVER FOUND! ##### acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: selected channel spec: 0x1809 acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: selected channel spec: 0xe39b wisp or APC is close [ Message ]------msgsnd--------[ ucloud ][ 721623, 65538 ] [ Message ]------msgsnd--------[ ucloud, 1 ] msg str: [cfm Post time_check 4?relate_module_id=19,string_info=first_time_start] [ Message ]------msgrcv--------[ ucloud ][ 721623 / 65538 ] [ Message ]------msghdl--------[ ucloud / 1 ] [ Message ]------msgsnd--------[ time_check ][ 721604, 32769 ] [ Message ]------msgsnd--------[ time_check, 4?relate_module_id=19,string_info=first_time_start ] [ Message ]------msgrcv--------[ time_check ][ 721604 / 32769 ] [ Message ]------msghdl--------[ time_check / 4?relate_module_id=19,string_info=first_time_start ] �[1;31m[TIMER_CHECK >>TimeCheckMsgHandle(163)]:�[mmsg:4?relate_module_id=19,string_info=first_time_start �[1;31m[TIMER_CHECK >>init_time_check_module_var(146)]:�[mkey = relate_module_id,value = 19 �[1;31m[TIMER_CHECK >>init_time_check_module_var(154)]:�[mkey = string_info,value = first_time_start tpi_sntp_handle(44): start sntp... tpi_set_user_policy,35: entry count:0 systime_server = 211.138.200.208 main,334,sntp_en =1,tz=7.00,checktime=86400 �[1;32m[ DEBUG ] �[mlan dhcp not enable get_first_mount_disk 136 /var/cache/.dlnacache Open /tmp/UDiskname is FailDisk:the file was locked. Writesamba.config.bak OK! Disk:/tmp/samba/lib/samba.config.bak the file was unlocked. ******* unlink /tmp/smbpasswd is fail startsmbfilepwent_internal: file /tmp/samba/private/smbpasswd did not exist. File successfully created. account_policy_get: tdb_fetch_uint32 failed for field 1 (min password length), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 2 (password history), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 3 (user must logon to change password), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 4 (maximum password age), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 5 (minimum password age), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 6 (lockout duration), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 7 (reset count minutes), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 8 (bad lockout attempt), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 9 (disconnect time), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 10 (refuse machine password change), returning 0 Added user admin.

Pictures

Retail Images

• 

  front

• 

  top

• 

  top2

• 

  back

Notes

Features

• Ultimate 11ac speed of up to 1900Mbps, delivering both 1300Mbps

(802.11ac) at 5GHz and 600Mbps (802.11n) at 2.4 GHz concurrently

• Broadcom dual-core processor with DDR3 memory for multi-client

with responsive performance and fast speed

• Beamforming+ technology boosts range for 802.11ac WiFi devices
• High powered amplifiers and three external antennas for coverage
• USB3.0 for personal secure cloud and printer sharing.
• Smart managements of WiFi schedule, LED indicator

and power saving all are for your healthy E-life

Hardware Specs

• Standard Protocol: 802.11bgn (2.4GHz), 802.11an/ac (5GHz)
• Interface: 1x GbE WAN port, 3x GbE LAN ports, 1x USB3.0 port
• Transmission Rate: up to 1900Mbps (1300+600Mbps)

2.4GHz: up to 600Mbps, 5GHz: up to 1300Mbps

• Frequency: works over 2.4GHz and 5GHz concurrently
• Antenna: 3x 3dBi external dual band antennas
• Security: WPA-PSK/WPA2-PSK, WPA/WPA2,

Wireless Security: Enable/Disable, WPS

• Internet Connection Type: Dynamic IP, Static IP, PPPoE
• Operating Mode: Wireless router, Universal repeater, WISP mode
• VPN Pass-through: PPTP server, PPTP client, L2TP client,

L2TP pass through, IPsec pass through, PPTP pass through

• USB Sharing: Samba, FTP Server, Media Server, Printer Server
• Other Function: Smart WiFi Schedule, Smart Power Saving,

Smart LED on/off , Tenda Cloud, Tenda App

• LED: Power, Internet, LAN, 5GHz, 2.4G, WPS, USB, SYS
• Button: Power on/off, WiFi on/off, Reset button, WPS button
• Default Settings: Default Access: tendawifi.com
• Power Input: AC 100-240V ~50/60Hz 0.3A

Power Output: DC 12V/2.5A

• Dimension: 226 x 180 x 76 mm