Tenda N3

bgn (N150)
150M Wireless Router
Homepage	Product page
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Tenda N3
FCC ID	V7TN3
Type	wireless router
CPU1	Broadcom BCM5356C0
CPU1 Type	MIPS 74K V4.9
CPU1 Speed	300 MHz
Flash1 Chip	Macronix MX25L8006
Flash1 Size	1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br />
RAM1 Size	8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Chip	EtronTech EM638165TS
ETH chip1	Broadcom BCM5356C0
Ethernet Port Count	1-WAN 1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
Power	9 VDC, 0.6 A
Connector type	barrel
Flags: schematics, block diagram
Other
Default IP address: 192.168.0.1 the IP 192.168.0.1 is used by 799 additional devices of which 57 are Tenda devices
Manuf/OEM/ODM	Tenda
Retail
FCC approval date	03 August 2012
UPC	843456180083 (UPC DB, On eBay)
ASIN	B00C20EFYS
Country of manuf	China
Radio 1
Chip1	Broadcom BCM5356C0
Wireless interface OUI	none specified
Antenna Connector Type	none
MIMO status	1x1:1
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 15 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Tenda device with specifications, see Tenda.

• 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

FCC

"N3" and "V1.0" is silkscreened on the board in the FCC photos.

The schematics identify the SoC used as a BCM5357C0..

but this is a dual-stream chip. It appears to instead use BCM5356B0.

Block diagram

CPU: Broadcom BCM5356C0 @300MHz 2.4GHz 1T1R WiSoC

Flash: Macronix MX25L8006 1MB SPI SOP8

RAM: EtronTech EM638165TS 8MB SDRAM TSOP54

Skyworks AS179 SPDT Switch

Ryanair FR9882 DC/DC Converter

GTM GTT3585 Power MOSFET TSSOP-6

Pictures

User Images

• 

  front

• 

  back