Tenda W268R (later)

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bgn (N150)
Wireless-N Broadband Router
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Incompatible
Tomato any flavor
Incompatible
Platform
BrandModelRev
Tenda W268R (later)
FCC ID
Type
wireless router
CPU1
Broadcom BCM5356
CPU1 Type
MIPS 74K
CPU1 Speed
not specified
Flash1 Chip
Winbond W25Q16
Flash1 Size
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip
EtronTech EM639165TS
ETH chip1
Broadcom BCM5356
Switch
Broadcom BCM5356
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: C8:3A:35 (21 E, 34 W)
Ethernet OUI: C8:3A:35 (21 E, 34 W)

Expansion IF types
none specified
Power
9 VDC, 0.6 A
Connector type
barrel
5.2 mm (OD)
3 mm (ID)
10 mm (LEN)
Other

Default SSID: Tenda (2 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 799 additional devices
of which 57 are Tenda devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1343 additional devices
of which 33 are Tenda devices

Retail
FCC approval date 09 September 2011
Country of manuf China
Radio 1
Chip1
Broadcom BCM5356
Wireless interface OUI
C8:3A:35
Antenna Connector Type
none specified
MIMO status
1x1:1
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 150 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Tenda W268R (earlier)RalinkRalink
Tenda W268R (later)BroadcomBroadcom

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Tenda device with specifications, see Tenda.

150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

Some devices w/ labeled FCC IDs of V7T268R may not actually use this board - one labeled as such was RT3050 based (the board was labeled as being for the W311R) w/ 2 MB Flash and 16 MB RAM

Based on the FCC filing date of this device, earlier model units may use BCM5356B0 rather than C0..

The default SSID for this device is assumed to remain as Tenda.

Used PSU(s)

At least some of these routers are using Shenzhen Heweishun Network Technology TEA09-09060s (9V, 0.6A).

Shenzhen Heweishun Network Technology TEA09-09060 (more)
Input: 100-240 VAC ~ 50/60 Hz, 0.3 A
 Input connector: NEMA 1-15P
Style: small, horiz.  Eff. level: 5
Output: 9 VDC, 0.6 A
 Output connector: barrel (center +)
 OD: ??  ID: ??  LEN: ??