Tenda W3002R
From TechInfoDepot
Jump to navigationJump to search
bgn (N300) | |
---|---|
Wireless N300 High Power Router | |
3rd Party Firmware | |
dd-wrt | Status Unknown |
OpenWrt | Incompatible |
Tomato any flavor | Incompatible |
Platform | |
Brand • Model • Rev | Tenda W3002R |
FCC ID | V7TW3002R |
Type | wireless router |
CPU1 ![]() | Broadcom BCM5357C0 |
CPU1 Type | MIPS 74K |
CPU1 Speed | 300 MHz |
Flash1 Chip | Brand? Model? |
Flash1 Size | 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> |
RAM1 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Chip | EtronTech Model? |
ETH chip1 | Broadcom BCM5357C0 |
Switch | Broadcom BCM5357C0 |
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
Wired Standard | IEEE 802.3i/3u |
802dot11 OUI: none specified | |
Expansion IF types | none specified |
Power | 9 VDC, 1 A |
Connector type | barrel |
Flags: | |
| |
Other | |
Default IP address: 192.168.0.1 | |
Retail | |
FCC approval date | 02 April 2013 |
UPC |
885397020400 (UPC DB, On eBay) |
ASIN |
B00F3ADAGI ![]() |
Country of manuf | China |
Radio 1 | |
Chip1 | Broadcom BCM5357C0 |
Wireless interface OUI | none specified |
Antenna Connector Type | none specified |
MIMO status | 2x2:2 |
Wireless Standard | IEEE 802.11b/g/n |
802.11n | up to 300 Mbps |
802.11g | up to 54 Mbps |
802.11b | up to 11 Mbps |
WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Tenda devices with specifications, see Tenda.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"10015133" and "V1.0" is silkscreened on the board in the FCC photos.
This device is using two Skyworks ( / SiGe) SE2605L / 2605L High Power 2.4GHz Power Amplifier ICs.
The device has 2MB Flash and 16MB RAM. (see W3002R bootlog in OpenWrt forum)
Likely C8:3A:35 OUI..