Tuoshi LT22M 4G

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
4G 300Mbps Indoor CPE
Homepage Product page
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
Brand • Model • Rev Tuoshi LT22M 4G
FCC ID none specified
Type wireless router
CPU1 checkY MediaTek MT7628DAN
CPU1 Type MIPS 24KEc
CPU1 Speed 580 MHz
Flash1 Chip Brand? Model?
Flash1 Size 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip Brand? Model?
ETH chip1 MediaTek MT7628DAN
Ethernet Port Count 2-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Expansion IF types none specified
Power 12 VDC, 2 A
Serial Port (UART) yes, 3.3V TTL, (57600 8N1)

Flags:
LTE

Radio 1
Chip1 MediaTek MT7628DAN
Chip2 MediaTek MT7628NN
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Flashing

Flashing OpenWrt

Target: ramips
Subtarget: mt76x8
Package architecture: mipsel_24kc
Support started version: unknown
Current supported version: unknown
LAN Hardware: MediaTek MT7628 integrated switch
WLAN Hardware: MediaTek MT7628
Installation method(s):
GUI OEM
Install Comment:
Proposed PR #14011 uses the OEM web interface to upload its stock-layout factory image; no official image is available yet.
Recovery method(s):
Serial, U-Boot TFTP + serial recovery, see devicepage
Recovery Comment:
Original bootloader can restore slot A from a valid OEM image in slot B; see PR #14011.
Comment:
OpenWrt support is pending in https://github.com/openwrt/openwrt/pull/14011 . No official release or snapshot image is available.

Please insert instructions here