Viptela vEdge 1000
| SD-WAN Router | |||||||||||||||||||||
|
| |||||||||||||||||||||
| Wikipedia | Cisco Systems | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| WikiDevi.wi-cat.ru | Viptela vEdge 1000 | ||||||||||||||||||||
| 3rd Party Firmware | |||||||||||||||||||||
| dd-wrt | Status Unknown | ||||||||||||||||||||
| OpenWrt | Supported | ||||||||||||||||||||
| Tomato any flavor | Incompatible | ||||||||||||||||||||
| Gargoyle | Status Unknown | ||||||||||||||||||||
| Platform | |||||||||||||||||||||
| Brand • Model • Rev | Cisco Viptela vEdge 1000 | ||||||||||||||||||||
| FCC ID | ANATEL01926-16-02024 | ||||||||||||||||||||
| Type | network security platform, SD-WAN Firewall | ||||||||||||||||||||
| CPU1 | Cavium CN6130 | ||||||||||||||||||||
| CPU1 Type | MIPS64 OCTEON II | ||||||||||||||||||||
| CPU1 Speed | 1.0 GHz ( 4 cores ) | ||||||||||||||||||||
| Flash1 Chip | Micron MTFC8GLDEA-1M WT | ||||||||||||||||||||
| Flash1 Size | 8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> (eMMc NAND) | ||||||||||||||||||||
| Flash2 Chip | Spansion S29GL128S10TF101 | ||||||||||||||||||||
| Flash2 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI NOR) | ||||||||||||||||||||
| RAM1 Size | 4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> (DDR3 SO-DIMM) | ||||||||||||||||||||
| RAM1 Chip | Kingston KVR13LSE9S8/4 | ||||||||||||||||||||
| ETH chip1 | Cavium CN6130 | ||||||||||||||||||||
| ETH chip2 | Vitesse VSC8211 | ||||||||||||||||||||
| Ethernet Port Count | 9-1GbE-LAN | ||||||||||||||||||||
| Wired Standard | IEEE 802.3i/3u/3ab | ||||||||||||||||||||
|
| |||||||||||||||||||||
| Stock bootloader | U-Boot 2013.07 | ||||||||||||||||||||
| Stock FW OS | Linux 3.10.62 -ltsi | ||||||||||||||||||||
| Expansion IF types | USB 3.0, SFP (GBIC), SDHC Card slot | ||||||||||||||||||||
| USB ports | 2 | ||||||||||||||||||||
| SD/MMC Slots | 1 | ||||||||||||||||||||
| SFP ports | 8 | ||||||||||||||||||||
| USB Hub Compatible | Untested | ||||||||||||||||||||
| Power | 12 VDC, 2.5 A | ||||||||||||||||||||
| Connector type |
barrel 5.5 mm (OD) 2.1 mm (ID) 9.5 mm (LEN) | ||||||||||||||||||||
| Serial Port (UART) | yes, RJ-45 console, 3.3V TTL, (115200 8N1) | ||||||||||||||||||||
|
Flags: | |||||||||||||||||||||
|
Additional chips | |||||||||||||||||||||
| Other | |||||||||||||||||||||
|
| |||||||||||||||||||||
| Manuf/OEM/ODM | Interface Masters Niagara 821 Rev G | ||||||||||||||||||||
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||||||||||||||||||
| Retail | |||||||||||||||||||||
| Availability | End of Life | ||||||||||||||||||||
| End of Life date | 2021 | ||||||||||||||||||||
| (Est.) release date | 2015 | ||||||||||||||||||||
| Country of manuf | USA | ||||||||||||||||||||
| |||||||||||||||||||||
For a list of all currently documented Cavium (Star) SoC's with specifications, see Cavium.
For a list of all currently documented Microsemi (Vitesse) chipsets with specifications, see Microsemi.
For a list of all currently documented Cisco devices with specifications, see Cisco.
Overview
Hardware specification
- CPU: Cavium CN6130 Quad-core MIPS64 (@1GHz)
- Memory: 4GB ECC DDR3 SODIMM
- Storage: 16MB SPI Flash, 8GB eMMC Flash, SDHC Card Slot
- Network: 1x Gigabit Ethernet port, 8x Gigabit SFP Ports
- USB: 2x USB 3.0 ports, 1x USB device port
- Power: Dual 12V, 2.5A via barrel
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Subtarget: generic
Package architecture: mips64_mips64r2
Supported Since Commit
Support started version: 24.10.0
Current supported version: fix
LAN Comment: 8 SFP-ports
Installation method(s):
Serial
Recovery method(s):
JTAG, U-Boot TFTP + serial recovery
| git • >> |
|---|
octeon: n821: add Cisco vEdge 1000 base
This is the first commit to introduce the base for the N821 board used
in Cisco vEdge 1000.
This commit does not include the custom CPLD drivers but rather
everything else that is already present in the upstream kernel.
This results in an image that boots, but e.g. the SFP ports are not
usable.
Hardware:
- CPU: Cavium Networks CN6130, 4 cores @ 1.0 GHz
- Flash:
- 16 MiB SPI NOR presented as 2x8 MiB for A/B boot recovery
- 8192 MiB eMMC
- RAM: 4096 MiB
- Ethernet 1Gbit ports: 1x
- Ethernet SFP ports: 8x
- USB ports: 2x 3.0 Type-A on front panel
- Serial: Two, one internal and one external
- JTAG: Yes
- LED count: 18x
- Button count: 1x
- GPIOs: 1x
- Power: 2x redundant DC 12V barrel
- Extra: Slot for SD card on front
See the OpenWrt wiki for more hardware details.
Installation:
- Flash squashfs to /dev/sda2 and put kernel on /dev/sda1.
- Update uboot's bootcmd environment variable to match.
Full installation guide will be added to OpenWrt wiki when sysupgrade
support is added.
Signed-off-by: Christian Svensson
Signed-off-by: Tommy Nevtelen
Tested-by: Viktor Ekmark
Tested-by: Daniel Wennberg
|
Pictures
- Cisco
- Viptela
- Embedded system/network security platform
- Embedded system/SD-WAN Firewall
- Embedded System Cavium
- Embedded System CN6130
- Cavium
- Embedded System MIPS64
- Embedded System OCTEON II
- Embedded System VSC8211
- Embedded System Vitesse
- Vitesse
- Manuf Interface Masters
- OpenWrt Supported
- Wired Embedded System
- Embedded System
- English Documentation