WAVLINK WL-WN529R2P
From TechInfoDepot
Jump to navigationJump to search
| bgn (N300) | |
|---|---|
| N300 Wireless Smart Router Access Point | |
|
| |
| Homepage | Product page |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Status Unknown |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | WAVLINK WL-WN529R2P |
| FCC ID (fcc.io) | none specified |
| FCC ID (fcc.report) | none specified |
| Type | wireless router |
| CPU1 | MediaTek MT7628NN |
| CPU1 Type | MIPS 24KEc |
| CPU1 Speed | 575 MHz |
| Flash1 Chip | GigaDevice GD25Q32B |
| Flash1 Size | 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (SPI) |
| RAM1 Size | 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (DDR) |
| RAM1 Chip | Zentel A3s56D40GTP |
| ETH chip1 | MediaTek MT7628NN |
| Switch | MediaTek MT7628NN |
| Ethernet Port Count |
1-100MbE-WAN 2-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader | U-Boot 1.1.3 Ralink UBoot 4.3.0.0 |
| Expansion IF types | none specified |
| Power | 5 VDC, 1 A |
| Connector type | barrel |
|
| |
|
| |
|
| |
| Retail | |
| Newegg | 9SIA6PF5HZ5845 |
| Radio 1 | |
| Chip1 | MediaTek MT7628NN |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented WAVLINK devices with specifications, see WAVLINK.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
JTAG-Serial Info
Serial
| Bootlog • >> |
|---|
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (14.07, unknown)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
[root@OpenWrt]main[114]:reset start
wps_init[15]:wps init
resetd_init[29]:flag:38
main[137]:reset_time: 40
br-lan: port 2(ra0) entered forwarding state
-------->fdb_create, 470!!!
nl socket is null !
procd: Instance log::instance1 s in a crash loop 6 crashes, 0 seconds since last crash
-------->fdb_create, 470!!!
nl socket is null !
host_ugrp_update[1344]port id err 8, need fix
U-Boot 1.1.3 (May 30 2016 - 17:36:32)
Board: Ralink APSoC DRAM: 32 MB
relocate_code Pointer at: 81fb8000
flash manufacture id: c8, device id 40 16
find flash: GD25Q32B
*** Warning - bad CRC, using default environment
============================================
Ralink UBoot Version: 4.3.0.0
--------------------------------------------
ASIC 7628_MP (Port5<->None)
DRAM component: 256 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 32 MBytes
Flash component: SPI Flash
Date:May 30 2016 Time:17:36:32
============================================
icache: sets:512, ways:4, linesz:32 ,total:65536
dcache: sets:256, ways:4, linesz:32 ,total:32768
##### The CPU freq = 575 MHZ ####
estimate memory size =32 Mbytes
RESET MT7628 PHY!!!!!!RST has be pushed!RST has be pushed!Auto Update: tftp 192.168.9.2 update.bin!
netboot_common, argc= 3
NetTxPacket = 0x81FE6380
KSEG1ADDR(NetTxPacket) = 0xA1FE6380
NetLoop,call eth_halt !
NetLoop,call eth_init !
Trying Eth0 (10/100-M)
Waitting for RX_DMA_BUSY status Start... done
ETH_STATE_ACTIVE!!
TFTP from server 192.168.9.2; our IP address is 192.168.9.233
Filename 'update.bin'.
TIMEOUT_COUNT=10,Load address: 0x80100000
Loading: Got ARP REPLY, set server/gtwy eth addr (e0:d5:5e:0c:d6:76)
Got it
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#######################################################
done
Bytes transferred = 4606571 (464a6b hex)
NetBootFileXferSize= 00464a6b
U-Boot 1.1.3 (May 30 2016 - 17:36:32)
Board: Ralink APSoC DRAM: 32 MB
relocate_code Pointer at: 81fb8000
******************************
Software System Reset Occurred
******************************
flash manufacture id: c8, device id 40 16
find flash: GD25Q32B
*** Warning - bad CRC, using default environment
|