WRTnode 7
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |
|---|---|
| WRTnode 7 IoT Board (MT7697) | |
| 3rd Party Firmware | |
| dd-wrt | |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
WRTnode 7 (MT7697) |
| FCC ID | |
| Type |
mini module, IoT board |
| CPU1 |
MediaTek MT7697 |
| CPU1 Type |
ARM Cortex-M4F |
| CPU1 Speed |
192 MHz |
| Flash1 Chip |
Winbond Model? |
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (NOR) |
| Flash2 Chip |
MediaTek MT7697 |
| Flash2 Size |
64 KiB 0.0625 MiB <br />65,536 B <br />512 Kib <br />0.5 Mib <br />6.103516e-5 GiB <br /> |
| RAM1 Size |
256 KiB 0.25 MiB <br />262,144 B <br />2,048 Kib <br />2 Mib <br />2.441406e-4 GiB <br /> |
| RAM1 Chip |
MediaTek MT7697 |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot |
| Stock FW OS |
Linux FreeRTOS |
| Expansion IF types |
none specified |
| Power |
3.3 VDC, 0.3 A |
| Connector type |
SD |
| Serial Port (UART) |
yes, 2x UART |
|
Flags: Bluetooth 4.2 LE | |
| Other | |
|
Default IP address: 192.168.8.1 | |
| Manuf/OEM/ODM | |
| 3rd Party Firmware Support | |
| Retail | |
| FCC approval date | 12 June 2017 |
| Radio 1 | |
| Radio1 module | |
| Radio1 module IF |
SD (40-pin) |
| Chip1 |
MediaTek MT7697 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
MHF4 |
| MIMO status |
1x1:1 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 150 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented WRTnode device with specifications, see WRTnode.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
See also: LinkIt 7697 and LinkIt Smart 7688
WRTnode 7
- CPU: MediaTek MT7697 @192MHz
- (ARM Cortex-M4 w/ FPU) • Spec.
- Flash: 32Mbite (NOR), RAM: 352KB (SRAM)
- WLAN: 802.11bgn 2.4GHz (150Mbps)
- Bluetooth 4.2 BLE (WiFi/BLE/MCU)
- I/O: 2x UART, SPI (master/slave), 2x I2C, I2S,
- 4x ADC (12bit), 28x GPIO, 28x PWM (40-pin)
- Power: 3.3V, Temp: -35~85℃, OS: FreeRTOS
- Dimensions: 23 x 18 mm
Links of Interest
- FCC-ID: 2ALR4-WRTNODE7 (2017-06-12)
Reviews
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
Support started version: ?
Current supported version: ?
Current supported version: ?
Please insert instructions here
See also
- WRTnode (MT7620N) v0.1
- WRTnode (MT7620N) v0.2 (EE)
- WRTnode 2P (MT7628A)
- WRTnode 2R (MT7688A)
- WRTnode 2Q (QCA9531)
- WRTnode Hi (Hi3516A)
- WRTnode 7 (MT7697)
Categories:
- WRTnode
- Embedded system/mini module
- Embedded system/IoT board
- Embedded System MediaTek
- Embedded System MT7697
- MediaTek
- Embedded System ARM
- Embedded System Cortex-M4F
- Manuf WRTnode
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Embedded System
- English Documentation
