YOUKU YK-L1c
From TechInfoDepot
Jump to navigationJump to search
| bgn (N300) | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| WiFi Router | |||||||||||||||||
 | |||||||||||||||||
| 3rd Party Firmware | |||||||||||||||||
| dd-wrt | Status Unknown | ||||||||||||||||
| OpenWrt | Supported | ||||||||||||||||
| Tomato any flavor | Incompatible | ||||||||||||||||
| Gargoyle | Status Unknown | ||||||||||||||||
| Platform | |||||||||||||||||
| Brand • Model • Rev | YOUKU YK-L1c | ||||||||||||||||
| FCC ID | none specified | ||||||||||||||||
| Type | wireless router | ||||||||||||||||
CPU1  | MediaTek MT7620A | ||||||||||||||||
| CPU1 Type | MIPS 24KEc | ||||||||||||||||
| CPU1 Speed | 580 MHz 32-bit | ||||||||||||||||
| Flash1 Chip | Brand? Model? | ||||||||||||||||
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||||||||||||||
| RAM1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> | ||||||||||||||||
| RAM1 Chip | Brand? Model? | ||||||||||||||||
| ETH chip1 | MediaTek MT7620A | ||||||||||||||||
| Switch | MediaTek MT7620A | ||||||||||||||||
| Ethernet Port Count |
1-100MbE-WAN 2-100MbE-LAN | ||||||||||||||||
| Wired Standard | IEEE 802.3i/3u | ||||||||||||||||
|
802dot11 OUI: none specified | |||||||||||||||||
| Stock bootloader | Breed | ||||||||||||||||
| Expansion IF types | microSD, USB 2.0 | ||||||||||||||||
| USB ports | 1 | ||||||||||||||||
| SD/MMC Slots | 1 | ||||||||||||||||
| USB Hub Compatible | Untested | ||||||||||||||||
| Power | 12 VDC, 1 A | ||||||||||||||||
| Serial Port (UART) | yes, 3.3V TTL, (57600 8N1) | ||||||||||||||||
| JTAG Port | no | ||||||||||||||||
|
| |||||||||||||||||
|
| |||||||||||||||||
| Other | |||||||||||||||||
|
| |||||||||||||||||
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||||||||||||||
| Retail | |||||||||||||||||
| Availability | End of Life | ||||||||||||||||
| End of Life date | 2023 | ||||||||||||||||
| Radio 1 | |||||||||||||||||
| Chip1 | MediaTek MT7620A | ||||||||||||||||
| Wireless interface OUI | none specified | ||||||||||||||||
| Antenna Connector Type | none specified | ||||||||||||||||
| MIMO status | 2x2:2 | ||||||||||||||||
| Wireless Standard | IEEE 802.11b/g/n | ||||||||||||||||
| 802.11n | up to 300 Mbps | ||||||||||||||||
| 802.11g | up to 54 Mbps | ||||||||||||||||
| 802.11b | up to 11 Mbps | ||||||||||||||||
| WiFi Operating Frequency | 2.4 GHz | ||||||||||||||||
| |||||||||||||||||
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: ramips
Subtarget: mt7620
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 21.02.4
Current supported version: fix
Subtarget: mt7620
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 21.02.4
Current supported version: fix
LAN Hardware: MediaTek MT7620A
WLAN Hardware: MediaTek MT7620A
Installation method(s):
GUI OEM
Install Comment:
https://www.minihere.com/how-to-update-firmware-on-u-boot.html or https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=eba0a8deb65de70b0d913f9ec8910640a79d0191
Comment:
internal Micro-SD slot
WLAN Hardware: MediaTek MT7620A
Installation method(s):
GUI OEM
Install Comment:
https://www.minihere.com/how-to-update-firmware-on-u-boot.html or https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=eba0a8deb65de70b0d913f9ec8910640a79d0191
Comment:
internal Micro-SD slot
| git • >> |
|---|
ramips: split Youku YK1 to YK-L1 and YK-L1c Device specifications: * Model: Youku YK-L1/L1c * CPU: MT7620A * RAM: 128 MiB * Flash: 32 MiB (YK-L1)/ 16 MiB (YK-L1c) * LAN: 2* 10M/100M Ports * WAN: 1* 10M/100M Port * USB: 1* USB2.0 * SD: 1* MicroSD socket * UART: 1* TTL, Baudrate 57600 Descriptions: Previous supported device YOUKU yk1 is actually Youku YK-L1. Though they look really different, the only hardware difference between the two models is flash size, YK-L1 has 32 MiB flash but YK-L1c has 16MiB. It seems that YK-L1c can compatible with YK-L1's firmware but it's better to split it to different models. It is easy to identify the models by looking at the label on the bottom of the device. The label has the model number "YK-L1" or "YK-L1c". Due to different flash sizes, YK-L1c that using previous YK-L1's firmware needs to apply "force update" to install compatible firmware, so please backup config file before system upgrade. Signed-off-by: Shiji Yang [use more specific name for DTSI] Signed-off-by: Adrian Schmutzler |
