ZeroPi
From TechInfoDepot
Jump to navigationJump to search
| Single Board Computer | |
 | |
| Homepage | Product page |
|---|---|
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | FriendlyELEC ZeroPi |
| Type | single-board computer |
CPU1  | Allwinner H3 |
| CPU1 Type | ARMv7-A Cortex-A7 |
| CPU1 Speed | 1.2 GHz ( 4 cores ) |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 0 MiB 0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (microSDHC) |
| RAM1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3) |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Allwinner H3 |
| ETH chip2 | Realtek RTL8211E |
| Ethernet Port Count | 1-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
| |
| Stock bootloader | U-Boot |
| Expansion IF types | USB 2.0 |
| USB ports | 1 |
| USB Hub Compatible | Untested |
| Power | 5 VDC, 2 A |
| Connector type | USB Female (Micro-B) |
| Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) |
| JTAG Port | no |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented FriendlyELEC devices with specifications, see FriendlyELEC.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: sunxi
Subtarget: cortexa7
Package architecture: arm_cortex-a7_neon-vfpv4
Supported Since Commit
Support started version: 21.02.0
Current supported version: 25.12.1
Subtarget: cortexa7
Package architecture: arm_cortex-a7_neon-vfpv4
Supported Since Commit
Support started version: 21.02.0
Current supported version: 25.12.1
LAN Comment: Realtek RTL8211E Phy
WLAN Hardware: none
WLAN Comment: No WLAN
Installation method(s):
SD card, Sunxi installation, see git-commit
Recovery method(s):
SD card
WLAN Hardware: none
WLAN Comment: No WLAN
Installation method(s):
SD card, Sunxi installation, see git-commit
Recovery method(s):
SD card
| git • >> |
|---|
sunxi: add support for FriendlyArm Zeropi
Specification
CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz
DDR3 RAM: 256MB/512MB
Connectivity: 10/100/1000Mbps Ethernet
USB Host: Type-A x 1
MicroSD Slot x 1
MicroUSB: for power input only
Debug Serial Port: 4Pin, 2.54 mm pitch pin header
Power Supply: DC 5V/2A
PCB Dimension: 40 x 40 x 1.2mm
Installation:
Burn the image file to an SD Card with dd or any image burning tool
Boot ZeroPi from the SD Card
The following features are working and tested:
Ethernet port 10/100/1000M Ethernet
Remarks: SBC is mostly compatible and boots with FriendlyARM NanoPI M1 plus DTS also (zeropi has no working hdmi)
|
