ZyXEL NBG-419N v2
bgn (N300) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wireless N300 NetUSB Router | |||||||||||||
Homepage | Product page | ||||||||||||
Wikipedia | ZyXEL | ||||||||||||
3rd Party Firmware | |||||||||||||
dd-wrt | Status Unknown | ||||||||||||
OpenWrt | Supported | ||||||||||||
Tomato any flavor | Incompatible | ||||||||||||
Gargoyle | Status Unknown | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev | ZyXEL NBG-419N v2 | ||||||||||||
FCC ID | I88NBG-419NV2 | ||||||||||||
IC ID | 2468C-NBG419NV2 | ||||||||||||
Type | wireless router | ||||||||||||
CPU1 ![]() | Ralink RT3352 | ||||||||||||
CPU1 Type | MIPS 24KEc | ||||||||||||
CPU1 Speed | 384 MHz | ||||||||||||
Flash1 Chip | Macronix MX25L6406E | ||||||||||||
Flash1 Size | 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||
RAM1 Size | 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||||||||
RAM1 Chip | Winbond W9751G6KB-25 | ||||||||||||
ETH chip1 | Ralink RT3352 | ||||||||||||
Switch | Ralink RT3352 | ||||||||||||
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN | ||||||||||||
Wired Standard | IEEE 802.3i/3u | ||||||||||||
802dot11 OUI: none specified | |||||||||||||
Stock bootloader | U-Boot | ||||||||||||
Expansion IF types | USB 2.0 | ||||||||||||
USB ports | 1 | ||||||||||||
USB Hub Compatible | Untested | ||||||||||||
Power | 12 VDC, 1 A | ||||||||||||
Connector type | barrel | ||||||||||||
Serial Port (UART) | yes, 3.3V TTL, (57600 8N1) | ||||||||||||
| |||||||||||||
| |||||||||||||
Other | |||||||||||||
Default SSID: ZyXEL (19 addl. devices) | |||||||||||||
Manuf/OEM/ODM | AboCom | ||||||||||||
3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||||||||||
Retail | |||||||||||||
Availability | End of Life | ||||||||||||
FCC approval date | 15 May 2012 | ||||||||||||
Country of manuf | Taiwan | ||||||||||||
Radio 1 | |||||||||||||
Chip1 | Ralink RT3352 | ||||||||||||
Wireless interface OUI | none specified | ||||||||||||
Antenna Connector Type | RP-SMA | ||||||||||||
MIMO status | 2x2:2 | ||||||||||||
Wireless Standard | IEEE 802.11b/g/n | ||||||||||||
802.11n | up to 300 Mbps | ||||||||||||
802.11g | up to 54 Mbps | ||||||||||||
802.11b | up to 11 Mbps | ||||||||||||
WiFi Operating Frequency | 2.4 GHz | ||||||||||||
|
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented ZyXEL devices with specifications, see ZyXEL.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"M01-420NA-D20" is silkscreened on the board in the FCC photos.
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
![]() | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 17.01.0
Current supported version: 24.10.2
WLAN Comment:
2x2
Please insert instructions here