Actiontec 802AA
a (A54) | |||||
---|---|---|---|---|---|
802.11a Wireless Access Point | |||||
Support | |||||
3rd Party Firmware | |||||
dd-wrt |
Status Unknown | ||||
OpenWrt |
Status Unknown | ||||
Tomato any flavor |
Incompatible | ||||
Platform | |||||
Brand • Model • Rev |
Actiontec 802AA | ||||
FCC ID | |||||
Type |
access point | ||||
CPU1 |
Freescale MPC8245 | ||||
CPU1 Type |
Power | ||||
CPU1 Speed |
266 MHz | ||||
Flash1 Chip |
Intel E28F640J3A-120 | ||||
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||
RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||
RAM1 Chip |
Micron MT48LC2M32B2 x 2 | ||||
ETH chip1 |
National Semiconductor DP83815 | ||||
Ethernet Port Count |
1-100MbE-LAN | ||||
Wired Standard |
IEEE 802.3i/3u | ||||
802dot11 OUI: none specified | |||||
Expansion IF types |
none specified | ||||
Power |
3.3 VDC, 3.5 A | ||||
Connector type |
barrel | ||||
Serial Port (UART) |
yes, DE-9 | ||||
Other | |||||
Default SSID: ACTIONTEC_11A | |||||
Manuf/OEM/ODM |
Orient Semiconductor Electronics | ||||
Retail | |||||
FCC approval date | 21 December 2001 | ||||
Country of manuf | Taiwan | ||||
Radio 1 | |||||
Chip1 |
Atheros AR5210A | ||||
Chip2 |
Atheros AR5110 | ||||
Wireless interface OUI |
none specified | ||||
Antenna Connector Type |
MMCX | ||||
Wireless Standard |
IEEE 802.11a | ||||
802.11a |
up to 54 Mbps | ||||
WiFi Operating Frequency |
5 GHz | ||||
|
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented NSC (Fairchild) SoC's with specifications, see NSC.
For a list of all currently documented Actiontec device with specifications, see Actiontec.
- • 54 Mbps - 5GHz 802.11a = A54 class
Overview
"ACTIONTEC", "802AA REV.1A" and "0145"is silkscreened on the board
- in the FCC photos (see also Actiontec).
The FCC label indicates some involvement of Orient Semiconductor Electronics
- (A partner you can count on). They are presumed to be the manufacturer.
This device uses the Atheros AR5BAP-00030 (AP30) reference design.
- The sample SSID in the manual is specified as ACTIONTEC_11A.
This is assumed to be the correct, but there is pretty much no WiGLE
- support for this device.
Links of Interest
Reviews
- Actiontec
- Embedded system/access point
- Embedded System Freescale
- Embedded System MPC8245
- Freescale
- Embedded System Power
- Embedded System
- Embedded System National Semiconductor
- Embedded System DP83815
- National Semiconductor
- Manuf Orient Semiconductor Electronics
- Embedded System Atheros
- Embedded System AR5210A
- Atheros
- Embedded System AR5110
- Embedded System IEEE 802.11a
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation