Belkin F5D8232-4 v2

multiple revisions of this device, use caution

bgn (N300)
N1 Vision Wireless Router
Homepage	Product page
Support	Support page
Wikipedia	Belkin
WikiDevi.wi-cat.ru	Belkin F5D8232-4 v2
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Belkin F5D8232-4 v2
FCC ID	K7SF5D8232-4V2
Type	wireless router
Series	F5D8232-4
CPU1 Y	Ralink RT2880
CPU1 Type	MIPS 4KEc
CPU1 Speed	266 MHz
Flash1 Chip	Macronix MX29LV320CBTC-70G
Flash1 Size	4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size	32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip	EtronTech EM639165TS-6G x 2
ETH chip1	Ralink RT2880
Switch	Realtek RTL8366SR
Ethernet Port Count	1-WAN 4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: 00:1C:DF (16 E, 32 W) Ethernet OUI: 00:1C:DF (16 E, 32 W)
Expansion IF types	none specified
Power	12 VDC, 1 A
Connector type	barrel
Other
Default IP address: 192.168.2.1 the IP 192.168.2.1 is used by 303 additional devices of which 99 are Belkin devices
Manuf/OEM/ODM	SerComm
Retail
FCC approval date	25 June 2008
Country of manuf	China
Radio 1
Chip1	Ralink RT2880
Chip2	Ralink RT2820
Wireless interface OUI	00:1C:DF
Antenna Connector Type	U.FL
MIMO status	2x3:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand Belkin F5D8232-4 v1 Atheros Atheros Atheros Belkin F5D8232-4 v2 Ralink Ralink Ralink

For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Belkin devices with specifications, see Belkin.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"YKM00D-1.6" is silkscreened on the board in the FCC photos.

The default SSID pattern may be Belkin_N1_Wireless_XXXXXX or Belkin_N1_XXXXXX (where XXXXXX is the last three octets of the wireless interface MAC [upper case hex characters]).

Links of Interest

• Post purporting a supported firmware image on the DD-WRT forums