Hewlett Packard Enterprise MSM466 (J9622A)
From TechInfoDepot
Jump to navigationJump to search
abgn (AN900) | |||||
---|---|---|---|---|---|
access point | |||||
3rd Party Firmware | |||||
dd-wrt | Status Unknown | ||||
OpenWrt | Supported | ||||
Tomato any flavor | Incompatible | ||||
Gargoyle | Status Unknown | ||||
Platform | |||||
Brand • Model • Rev | Hewlett Packard Enterprise MSM466 (J9622A) | ||||
FCC ID | RTP-MRLBB1003S | ||||
Type | access point | ||||
CPU1 ![]() | Freescale P1020 | ||||
CPU1 Type | Power | ||||
CPU1 Speed | 667 MHz ( 2 cores ) 32-bit | ||||
Flash1 Chip | Micron 2CA1 | ||||
Flash1 Size | 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND) | ||||
RAM1 Size | 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (DDR3) | ||||
RAM1 Chip | Micron MT41J64M16JT-15E:G | ||||
ETH chip1 | Freescale P1020 | ||||
Ethernet Port Count | 1-1GbE-LAN | ||||
Wired Standard | IEEE 802.3i/3u/3ab | ||||
802dot11 OUI: none specified | |||||
Stock bootloader | U-Boot | ||||
Expansion IF types | Mini PCI | ||||
Mini PCI slots | 2 | ||||
PoE | 802.3af, standard | ||||
Power | ? VDC, ? A | ||||
Serial Port (UART) | yes, RS232, (115200 8N1) | ||||
| |||||
| |||||
Other | |||||
| |||||
3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||
Retail | |||||
Availability | End of Life | ||||
Radio 1 | |||||
Radio1 module | unknown | ||||
Radio1 module IF | Mini PCI | ||||
Chip1 | Atheros AR9390 | ||||
Wireless interface OUI | none specified | ||||
Antenna Connector Type | none specified | ||||
MIMO status | 3x3:3 | ||||
Wireless Standard | IEEE 802.11a/b/g/n | ||||
802.11n | up to 450/450 Mbps | ||||
802.11g | up to 54 Mbps | ||||
802.11b | up to 11 Mbps | ||||
802.11a | up to 54 Mbps | ||||
WiFi Operating Frequency | 2.4 or 5 GHz | ||||
Radio 2 | |||||
Radio2 module | unknown | ||||
Radio2 module IF | Mini PCI | ||||
Chip1 | Atheros AR9390 | ||||
Wireless interface OUI | none specified | ||||
Antenna Connector Type | none specified | ||||
MIMO status | 3x3:3 | ||||
Wireless Standard | IEEE 802.11a/n | ||||
802.11n | up to 450 Mbps | ||||
802.11a | up to 54 Mbps | ||||
WiFi Operating Frequency | 5 GHz | ||||
|
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented Hewlett Packard Enterprise devices with specifications, see Hewlett Packard Enterprise.
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
On the OpenWrt Forum
OpenWrt Target: mpc85xx
OpenWrt Subtarget: p1020
OpenWrt Package architecture: powerpc_8540
Support started version: 24.10.0
Current supported version: 24.10.2
WLAN Comment:
3x3:3 MIMO cards. Both 5ghz capable. Running both at 5ghz can lead to DFS events.
Install Comment:
Identical to MSM460
Recovery Comment:
Identical to MSM460
Comment:
J9621A and J9620A should be identical but are untested. Of note patch sent to mailing list to add it as an altname for msm460. After flashing for my unit, transmit power limits were 23dBm in 2.4GHz, 18dBm in 5GHz. Factory is 20dBm in both bands for both radios. Factory left it to the user to consider transmit power, antenna gain and channel selection, given the approval for indoor and outdoor antennas of various gains.
On the OpenWrt Forum
OpenWrt Target: mpc85xx
OpenWrt Subtarget: p1020
OpenWrt Package architecture: powerpc_8540
Support started version: 24.10.0
Current supported version: 24.10.2
WLAN Comment:
3x3:3 MIMO cards. Both 5ghz capable. Running both at 5ghz can lead to DFS events.
Install Comment:
Identical to MSM460
Recovery Comment:
Identical to MSM460
Comment:
J9621A and J9620A should be identical but are untested. Of note patch sent to mailing list to add it as an altname for msm460. After flashing for my unit, transmit power limits were 23dBm in 2.4GHz, 18dBm in 5GHz. Factory is 20dBm in both bands for both radios. Factory left it to the user to consider transmit power, antenna gain and channel selection, given the approval for indoor and outdoor antennas of various gains.
Please insert instructions here
Categories:
- Hewlett Packard Enterprise
- Embedded system/access point
- Embedded System Freescale
- Embedded System P1020
- Freescale
- Embedded System Power
- Embedded System
- OpenWrt Supported
- Embedded System Atheros
- Embedded System AR9390
- Atheros
- Has Mimo Status
- Embedded System IEEE 802.11a/b/g/n
- Embedded System IEEE 802.11a/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation