iconnect AP880G

bg (G54)
wireless router
WikiDevi.wi-cat.ru	I-connect AP880G
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	iconnect AP880G
FCC ID	RMA000001
Type	wireless router
CPU1	Atheros AR2312A
CPU1 Type	MIPS 4Kc
CPU1 Speed	180 MHz
Flash1 Chip	Fujitsu Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	AMIC Model?
ETH chip1	Atheros AR2312A
Switch	Marvell 88E6060
Ethernet Port Count	1-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
Power	9 VDC, 1 A
Connector type	barrel
Flags: block diagram
Additional chips 2.4GHz Power Amplifier IC;Microsemi;LX5510;;1;
Other
Default SSID: 11g (2 addl. devices) Default IP address: 10.0.0.1 the IP 10.0.0.1 is used by 20 additional devices of which 0 are iconnect devices
Manuf/OEM/ODM	RFNet
Retail
FCC approval date	22 November 2003
Radio 1
Chip1	Atheros AR2312A
Chip2	Atheros AR2112A
Wireless interface OUI	none specified
Antenna Connector Type	RP-SMA
Wireless Standard	IEEE 802.11b/g
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.

• 54 Mbps - 2.4GHz 802.11g = G54 class

Overview

The AP880G and AP880G-Pro would appear to be covered by this FCC ID.

"PCB-1016-00" appears to be silkscreened on the board in the FCC photos.

The Aztech NA8300 appears to share the same board as this device. The parent RFNet model may be APRT-2001g.

Default settings are per the FCC manual.

The power supply shown in the external photos is an unbranded SY-0901 (120VAC ~ 60Hz, 150mA -> 9VDC, 1.0A).