Database changes have finished applying - please report any issues you're (still) seeing to support@shoutwiki.com.

LevelOne WBR-2400TX

From TechInfoDepot
Jump to navigationJump to search
b (B11)
22Mbps Wireless AP Router w/ 4-Port Switch
Wikipedia LevelOne
3rd Party Firmware
dd-wrt Incompatible
OpenWrt Incompatible
Tomato any flavor Incompatible
Platform
BrandModelRev LevelOne WBR-2400TX
FCC ID P270K3A
Type wireless router
CPU1 Question? Texas Instruments TNETW5305
CPU1 Type ARM7
Flash1 Chip Brand? Model?
Flash1 Size ? MiB
RAM1 Size ? MiB
RAM1 Chip Brand? Model? x 2
ETH chip1 Texas Instruments TNETW5305
Switch ADMtek Model?
Ethernet Port Count 1-WAN4-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types none specified
Power 12 VDC, 0.8 A
Connector type barrel
Other

Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 817 additional devices
of which 18 are LevelOne devices

Manuf/OEM/ODM SerComm
Retail
FCC approval date 10 June 2003
Country of manuf Taiwan
Radio 1
Chip1 Texas Instruments ACX100
Wireless interface OUI none specified
Antenna Connector Type none specified
Wireless Standard IEEE 802.11b
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented ADMtek chipsets with specifications, see ADMtek.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.

For a list of all currently documented LevelOne devices with specifications, see LevelOne.

11 Mbps - 2.4GHz 802.11b = B11 class

Overview

"MADE IN TAIWAN" and "4900K301B" is silkscreened on the LED board in the FCC photos.

The FCC test report specifies the CPU as the TNETW5305 (ARM7) and the Flash and RAM size as 1MB and 4MB respectively (with Can Expand noted after the values). It also specifies the Switch chip as a Atan 8995L / AT8985P or Marvell 88E6052.. but the FCC image shows the device with an ADMtek Switch.

This device uses the same board as the SerComm IP706ST (minus some minor changes like modularization of the LEDs).

The default SSID may be default.

Links of Interest

Manual