Linksys MR7350

From TechInfoDepot
Jump to navigationJump to search
abgn+ac+ax (AX1800)
Max-Stream Mesh WiFi 6 Router
Support Support page
Wikipedia Linksys routers
WikiDevi.wi-cat.ru Linksys MR7350
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Partial Support
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev Linksys MR7350 v1
FCC ID Q87-08151
IC ID 3839A-08151
Board ID EWW610-A1-BL-015
Type wireless router
CPU1 checkY Qualcomm IPQ6028
CPU1 Type ARM Cortex-A53
CPU1 Speed 1.2 GHz ( 4 cores )
Flash1 Chip Macronix MX30UF2G18AC-XKI
Flash1 Size 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
Flash2 Chip Macronix Model?
Flash2 Size 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (SPI NOR)
RAM1 Size 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3 SDRAM)
RAM1 Chip Winbond W634GU6NB-11
ETH chip1 Qualcomm IPQ6028
Switch Qualcomm Atheros QCA8075
Ethernet Port Count 1-1GbE-WAN
4-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types USB 3.0
USB ports 1
USB Hub Compatible Untested
Power 12 VDC, 2 A
Connector type barrel
Serial Port (UART) yes, 12-pin header, 3.3V TTL, (115200 8N1)
JTAG Port yes, 14-pin header, EJTAG

Flags:
Wi-Fi 6, MU-MIMO, OFDMA, DBDC, DFS, HE80, VHT80

Additional chips
2.4GHz WLAN FEM;Skyworks;SKY85340-11;;2;
5GHz WLAN FEM;Skyworks;SKY85755-11;;2;
PMIC;MPS;MP5496;MPSK04, MP5496, 74S827;1;

Other

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1359 additional devices
of which 156 are Linksys devices

Manuf/OEM/ODM CyberTAN EWW610 -A1
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
FCC approval date 31 March 2020
(Est.) release date June 2020
Country of manuf China
Physical
Dimensions 215 x 155 x 56
Weight 567 g
Radio 1
Chip1 Qualcomm QCN5022
Wireless interface OUI none specified
Antenna Connector Type U.FL
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n/ax
802.11ax up to 574 Mbps
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 Qualcomm QCN5052
Wireless interface OUI none specified
Antenna Connector Type U.FL
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n/ac/ax
802.11ax up to 1201 Mbps
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 FCC ID
Linksys MR7310Q87-08151
Linksys MR7320Q87-08151
Linksys MR7340Q87-08151

For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented Linksys devices with specifications, see Linksys.

• 574 Mbps - 2SS 2.4GHz 802.11ax (40MHz chan., 256-QAM),
• 1201 Mbps - 2SS 5GHz 802.11ax (80MHz chan., 1024-QAM) = AX1800 class

Overview

"EWW610-A1-BL-015" is silkscreened on the board in the FCC photos.

OEM: CyberTAN EWW610
FCC ID: Q87-08151 (2020-03-31) • Dual-Band 802.11ax Wireless Router
See also BitsWRT NHX6018

Specifications

Pro 400: Quad-core (ARM Cortex-A53)
  • Flash: 32MB (NOR)/256MB (NAND)
  • RAM: 512MB SDRAM (DDR3L)
  • WiFi: Qualcomm QCN5022/QCN5052
Wi-Fi 6 - 802.11ax 2T2R (AX1800)
  • PMIC: Monolithic Power Systems MP5496
  • WAN: 1x 1GbE, LAN: 4x 1GbE ports
  • USB: 1x USB 3.0 port; PSU: 12V/2A

Links of Interest


Models

FCC ID: Q87-08151 (2020-03-31) • Dual-Band 802.11ax Wireless Router
WFA ID: WFA111136 (2021-03-16) • Wi-Fi 6E 802.11ax (2.4/5/6GHz)

Flashing

Flashing OpenWrt

Target: qualcommax
Subtarget: ipq60xx
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 25.12.0
Current supported version: 25.12.5
Unsupported Functions:
BT
LAN Hardware: Qualcomm Atheros QCA8075
WLAN Hardware: Qualcomm QCN5022, Qualcomm QCN5052
WLAN Comment: MIMO 2x2:2 on both bands
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
git • >>
qualcommax: ipq60xx: add Linksys MR7350 support
Linksys MR7350 is a 802.11ax Dual-band router/AP.
Specifications:
* CPU: Qualcomm IPQ6000 Quad core Cortex-A53(A73) 1.5GHz
* RAM: 512MB of DDR3
* Storage: 256Mb NAND
* Ethernet: 5x1G RJ45 ports (QCA8075)
* WLAN:
	* 2.4GHz: Qualcomm QCN5022 2x2 802.11b/g/n/ax 574 Mbps PHY rate
	* 5GHz: Qualcomm QCN5052 2x2@80MHz or  802.11a/b/g/n/ac/ax 1201 Mbps PHY rate
* LED-s:
	* RGB system led
	* USB blue led

* Buttons: 1x Soft reset 1x WPS
* Power: 12V DC Jack

Installation instructions:
Open Linksys Web UI - http://192.168.1.1/ca or http://10.65.1.1/ca depending on your setup.
Login with your admin password. The default password can be found on a sticker under the device.
To enter into the support mode, click on the “CA” link and the bottom of the page.
Open the “Connectivity” menu and upload the squash-factory image with the “Choose file” button.
Click start. Ignore all the prompts and warnings by click “yes” in all the popups.
The Wifi radios are turned off by default. To configure the router, you will need to connect your computer to the LAN port of the device.
Then you would need to write openwrt to the other partition for it to work
- First Check booted partition:
fw_printenv -n boot_part

- Change the partition:
fw_setenv boot_part 1
or
fw_setenv boot_part 2
depending on the current partition

- Then install Openwrt to the other partition if booted in slot 1:
mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq60xx-linksys_mr7350-squashfs-factory.bin alt_kernel

- If in slot 2:
mtd -r -e kernel -n write openwrt-qualcommax-ipq60xx-linksys_mr7350-squashfs-factory.bin kernel

Pictures

Retail Images

See also

List of 802.11ax Hardware • Linksys • Wireless Routers
CPU: Qualcomm Networking Pro 1210 Quad-core (ARM-Cortex A53)
CPU: MediaTek MT7622/MT7615N/MT7915A (MT7911AN/MT7975AN)
Wi-Fi: 800Mbps (2.4GHz), 2400Mbps (5GHz); WAN/LAN: 1x/4x (1GbE)
WFA ID: WFA109988 (2021-01-14) • Wi-Fi 6E 802.11ax (2.4/5/6GHz)