We'll be deploying 1.43 to ShoutWiki sites this weekend. Staff will be working all weekend to deal with any unforeseen bugs that crop up.
CreateWiki will not be available immediately after the upgrade; however, we expect the rewrite to be completed during this release cycle.
PocketBeagle
From TechInfoDepot
Jump to navigationJump to search
| Development Board | |
|
| |
| Homepage | Product page |
|---|---|
| WikiDevi.wi-cat.ru | PocketBeagle |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Status Unknown |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | BeagleBoard PocketBeagle (rev A2) |
| Type | single-board computer |
| CPU1 | Octavo Systems OSD3358 |
| CPU1 Type | ARM Cortex-A8 |
| CPU1 Speed | 1.0 GHz |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 0 MiB 0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> |
| RAM1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
| RAM1 Chip | Micron MT41K256M16HA-125 |
|
| |
| Expansion IF types | USB 2.0 (OTG), Micro SD |
| USB ports | 1 |
| SD/MMC Slots | 1 |
| USB Hub Compatible | Untested |
| Power | 5 VDC, 0.15 A |
| Connector type | USB Female (Micro-B) |
| Serial Port (UART) | yes, 3-pin, 3.3V TTL, (115200 8N1) |
| JTAG Port | yes, 7-pad |
|
Flags: | |
|
| |
|
| |
| Retail | |
| (Est.) release date | September 2017 |
| (Est.) initial retail price (in USD): | $25 |
| ASIN |
B07663NS35 |
| Country of manuf | China |
For a list of all currently documented Octavo Systems SoC's with specifications, see Octavo Systems.
For a list of all currently documented BeagleBoard devices with specifications, see BeagleBoard.
Overview
See also: BeagleBoard
Specifications
- CPU: Octavo Systems OSD3358 (ARM Cortex-A8)
- Processor: TI Sitara AM3358 @1GHz (ARM Cortex-A8)
- NEON floating-point accelerator (ARM Cortex-M3)
- 2× 32-bit @200MHz programmable real-time units (PRUs)
- RAM: 512MB (DDR3), 4KB I2C EEPROM for board configuration information
- Texas Instruments TPS65217C PMIC, TL5209 LDO
The board can be powered from three different sources:
- USB port on a PC via Female Mini-B
- Power supply with a USB connector via Female Mini-B
- Expansion Header pins (VIN, VIN-USB or VIN-BAT)