RPF Raspberry Pi 5 8GB

multiple revisions of this device, use caution

abgn+ac (AC600)
Raspberry Pi 5 8GB RAM
Homepage	Product page
WikiDevi.wi-cat.ru	RPF Raspberry Pi 5 8GB
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Status Unknown
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	RPF Raspberry Pi 5 (8GB)
FCC ID	2ABCB-RPI5
IC ID	20953-RPI5
Type	single-board computer
CPU1 N	Broadcom BCM2712
CPU1 Type	ARM Cortex-A76
CPU1 Speed	2.4 GHz ( 4 cores ) 64-bit
Flash1 Chip	Brand? Model?
Flash1 Size	0 MiB 0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (MicroSD Card)
RAM1 Size	8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> (LPDDR4X SDRAM)
RAM1 Chip	Micron MT53E2G32D4DE-046 WT:C
ETH chip1	Broadcom BCM2712
ETH chip2	Broadcom BCM54213
Ethernet Port Count	1-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Stock bootloader	other
Stock FW OS	Linux
Expansion IF types	USB 2.0, USB 3.0, PCIe x1, MicroSD Card slot, Micro HDMI
Mini PCIe slots	1
USB ports	4
SD/MMC Slots	1
HDMI	1
USB Hub Compatible	Untested
Power	5 VDC, 5 A
Connector type	USB Female (Type-C)
Serial Port (UART)	yes, 3-pin header, populated, 3.3V TTL, (115200 8N1)
Flags: Bluetooth 5.0 (BLE), MicroSD Card slot, Micro HDMI, MIPI CSI/DSI, RTC, PoE Expansion header, fan header, SPI, I2C, PWM, UART, GPIO
Additional chips Multiphase PMIC Controller;Renesas;DA9091;;1; Raspberry Pi Peripheral Controller;RPF;RP1-C0;;1;
Other
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Retail
FCC approval date	18 October 2023
(Est.) release date	October 2023
(Est.) initial retail price (in USD):	$80
EAN	5056561803326 (UPC DB, On eBay)
ASIN	B0CPGPJ3JC
Country of manuf	UK
Radio 1
Radio1 module	unknown
Radio1 module IF	SDIO 3.0
Chip1	Cypress CYW43455
Wireless interface OUI	none specified
Antenna Connector Type	none (internal)
MIMO status	1x1:1
Wireless Standard	IEEE 802.11a/b/g/n/ac
802.11ac	up to 433 Mbps
802.11n	up to 150/150 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	2.4 or 5 GHz
FCC ID RPF Raspberry Pi 5 16GB 2ABCB-RPI5
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand RPF Raspberry Pi 5 16GB Broadcom Cypress (Infineon) RPF Raspberry Pi 5 8GB Broadcom Cypress RPF Raspberry Pi 500 Broadcom Cypress

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Cypress (Broadcom) chipsets with specifications, see Cypress.

For a list of all currently documented RPF devices with specifications, see RPF.

• 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.),

• 433 Mbps - 1SS 5GHz 802.11ac (80MHz chan.) = AC600 class

Overview

"Raspberry Pi 5" is silkscreened near the 40-pin GPIO connector.

See also: RPF Raspberry Pi series

Hardware specification

RPF Raspberry Pi 5 (4GB/8GB)

• CPU: Broadcom BCM2712 @2.4GHz

SoC: Quad-core ARM (Cortex-A76)

• GPU: Broadcom VideoCore VII

OpenGL ES 3.1, Vulkan 1.2,

H.265 (HEVC) (up to 4Kp60 decode),

H.264 (up to 1080p60 decode, 1080p30 encode)

• Storage: TF card (max.512GB)/MMC card slot
• Memory: 4/8GB (LPDDR4X) SDRAM
• Wi-Fi: Cypress (Infineon) CYW43455 (1T1R)

SDIO 3.0: Wi-Fi 802.11ac, UART/PCM: BT 5.0 LE

• Network: 1x 1GbE port
• USB: 2x USB 3.0 (Host), 2x USB 2.0 (Host) ports
• PCIe: PCIe 2.0 x1 via ribbon cable
• GPIO: 1x 40-pin headers
• Power Source: 5V via USB (Type-C) port

Links of Interest

• Raspberry Pi 5 SBC launched with 2.4 GHz Broadcom BCM2712 on CNX|Software
• Next-Generation Raspberry Pi 5 on LinuxGizmos
• https://www.waveshare.com/wiki/Raspberry_Pi_5

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum

Target: bcm27xx
Subtarget: bcm2712
Package architecture: aarch64_cortex-a76
Supported Since Commit
Support started version: 24.10.2
Current supported version: 25.12.5

WLAN Hardware: Cypress CYW43455
WLAN Comment: SDIO connected
Installation method(s):
SD card
Recovery method(s):
SD card
Comment:
RAM: 2, 4, 8, 16GB Options, eMMC optional

git • >>

bcm27xx: add new bcm2712 subtarget This patch adds support for Raspberry Pi 5. Instead of using 16K pages like Raspberry Pi OS, OpenWrt uses 4K pages due to incompatibilities with F2FS and other applications. There are multiple RPi forum posts with different cases and users are forcing kernel8.img to workaround them, which is the 64 bit kernel of the RPi 4. However, this isn't possible in OpenWrt because we only ship one kernel and we would have to add RPi 5 support to bcm2711 subtarget (RPi 4) for that workaround to work in OpenWrt. Specification: - Processor Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptographic extension, 512KB L2 caches per core, 2048KB L3 cache Features: - VideoCore VII GPU, supports OpenGL ES 3.1, Vulkan 1.2 - Dual 4Kp60 HDMI display output with HDR support 4Kp60 HEVC decoder - LPDDR4X-4267 SDRAM 4GB and 8GB - Dual-band 802.11ac Wi-Fi - Bluetooth 5.0 / Bluetooth Low Energy - microSD card slot, with support for SDR104 high-speed mode - 2 x USB 3.0 ports - 2 x USB 2.0 ports - Gigabit Ethernet - 2 x 4 lane MIPI camera/display - PCIe 2.0 x1 - 5V/5A power via USB-C - Raspberry Pi standard 40-pin header - Real-time clock RTC - Power button Build system: x86_64 Build-tested: bcm2712 Run-tested: bcm2712/RPi5