Radxa Zero 3W (D2E16H1W15)

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac+ax (AX600)
Single-board Computer
Homepage Product page
WikiDevi.wi-cat.ru Radxa Zero 3W (D2E16H1W15)
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev Radxa Zero 3W (D2E16H1W15) V1.11
FCC ID none specified
Type single-board computer
CPU1 ☒N Rockchip RK3566
CPU1 Type ARM Cortex-A55
CPU1 Speed 1.6 GHz ( 4 cores ) 64-bit
Flash1 Chip Samsung KLMAG1JETD-B041
Flash1 Size 16 GiB 16,384 MiB <br />17,179,869,184 B <br />134,217,728 Kib <br />16,777,216 KiB <br />131,072 Mib <br /> (eMMC (5.1))
RAM1 Size 2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> (LPDDR4 SDRAM)
RAM1 Chip Micron Model?

802dot11 OUI: 98:03:CF (-, 1 W)

Stock bootloader U-Boot 2023.10-8
Stock FW OS Linux 5.10.160 Debian 11
Expansion IF types USB 3.0, USB 2.0 (OTG), Micro SD Card slot, Micro HDMI 2.0a
USB ports 2
SD/MMC Slots 1
HDMI 1
USB Hub Compatible Untested
Power 5 VDC, 2 A
Connector type USB Female (Type-C)
Serial Port (UART) yes, via GPIO header, 3.3V TTL, (1500000 8N1)

Flags:
Micro SD Card slot, Micro HDMI 2.0a, MIPI CSI

Additional chips
Power Management IC;Rockchip;RK817-5;;1;
Power Management IC;Rockchip;RK860-0;;1;
0.5-6.0 GHz SPDT Switch;OnMicro;OM8751D;;1;
4 Channel ESD Protection Device;TI;TPD4E05U06;;2;
Programmable USB Type-C Controller;Jintop;ET7301;;1;
5V, 1A USB Power Distribution Switch;Silergy;SY6280AAC;;1;
4-Bit Bidirectional Voltage-Level Translator;Union Semi;UM3204;;1;
2 Differential Channel, 2-Choice USB 3.0 Analog Switch;WCH;CH482;;1;

Other

Default IP address: acquired via DHCP
the IP acquired via DHCP is used by 254 additional devices
of which 17 are Radxa devices
Default login user: radxa
Default login password: radxa
radxa:radxa credentials used by 4 additional devices
of which 4 are Radxa devices

3rd Party Firmware Support Armbian, DietPi, OpenWrt • (List | Dev | DLs)
Retail
(Est.) release date January 2024
(Est.) initial retail price (in USD): $31
ASIN B0CZCX4JGJ
Country of manuf China
Radio 1
Radio1 module Radxa Wireless Module D8
Radio1 module IF SDIO 3.0
Chip1 AIC AIC8800
Wireless interface OUI 98:03:CF
Antenna Connector Type U.FL
MIMO status 1x1:1
Wireless Standard IEEE 802.11a/b/g/n/ac/ax
802.11ax up to 287/600 Mbps
802.11ac up to 433 Mbps
802.11n up to 150/150 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 2.4 or 5 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Radxa Zero 3E (D2E0H1)Rockchip
Radxa Zero 3W (D2E16H1W15)RockchipAIC

For a list of all currently documented AIC chipsets with specifications, see AIC.
For a list of all currently documented Rockchip SoC's with specifications, see Rockchip.

For a list of all currently documented Radxa devices with specifications, see Radxa.

• 287 Mbps - 1SS 2.4GHz 802.11ax (40MHz chan., 256-QAM),
• 600 Mbps - 1SS 5GHz 802.11ax (40MHz chan., 256-QAM) = AX600 class

Overview

"Zero 3W V1.11" is silkscreened on board top between SOC and DRAM.

"radxa" is silkscreened on board bottom.
See also: Radxa and List of Single-board computers

Hardware specification

  • CPU: Rockchip RK3566 @1.6GHz Quad-Core ARM (Cortex-A55)
  • GPU: Mali-G52 2EE (OpenGL ES3.2); NPU 0.8Tops @INT8
VPU (with 4K VP9 and 4K 10-bit H265/H264 decoding)
  • Storage: 16GB (eMMC 5.1) Flash,
TF card (max.128GB)/MMC card slot
  • Memory: 2GB (LPDDR4) SDRAM
  • Wi-Fi: AIC AIC8800 D80 (1T1R 802.11ax)
SDIO 3.0: Wi-Fi, UART/PCM: BT 5.4 BLE
  • USB: 1x USB 2.0 (Type-C OTG), 1x USB 3.0 (Type-C) ports
  • GPIO: 1x 40-pin headers
  • Power Source: 5V/2A via USB (Type-C OTG) port

Links of Interest

Flashing

Flashing OpenWrt

Target: rockchip
Subtarget: armv8
Package architecture: aarch64_generic
Supported Since Commit
Support started version: 24.10.0
Current supported version: 25.12.1
WLAN Hardware: AIC AIC8800 D80
WLAN Comment: WLAN currently not supported
Installation method(s):
SD card, see git-commit
Recovery method(s):
SD card, unknown
Comment:
1GB/2GB/4GB/8GB LPDDR4 available, 8GB/16GB/32GB/64GB eMMC available
git • >> 
rockchip: add support for Radxa ZERO 3E and 3W
Radxa ZERO 3E and 3W are light, compact and tiny SBC[1][2] using the
Rockchip RK3566.

Hardware
--------
- Rockchip RK3566 SoC
- Quad A55 CPU
- Mali-G52-2EE GPU
- 1 TOPS @ INT8 NPU
- 1GB/2GB/4GB/8G LPDDR4 RAM
- Optional 8GB/16GB/32GB/64GB eMMC (3E)
- Micro SD Card slot
- 1x Gigabit ethernet port (supports PoE with add-on PoE HAT) (3E)
- WiFi6/BT5.4 (3W) (not supported yet on OpenWrt)
- 1x USB 3.0 Type-C HOST port
- 1x USB 2.0 Type-C OTG port
- Optional 40 Pin GPIO header

[1] https://radxa.com/products/zeros/zero3e
[2] https://radxa.com/products/zeros/zero3w

Installation
------------
Uncompress the OpenWrt sysupgrade and write it to a micro SD card or
internal eMMC using dd.

Pictures

User Images
  • Board Top
    Board Top
  • Board Bottom
    Board Bottom
Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=Radxa_Zero_3W_(D2E16H1W15)&oldid=525925"