Ruckus Wireless MediaFlex 7111 (VF7111)
From TechInfoDepot
Jump to navigationJump to search
| an (A300) | |||||
|---|---|---|---|---|---|
| 7111 Multimedia Wireless Adapter | |||||
|
| |||||
| WikiDevi.wi-cat.ru | Ruckus Wireless MediaFlex 7111 (VF7111) | ||||
| 3rd Party Firmware | |||||
| dd-wrt | Status Unknown | ||||
| OpenWrt | Status Unknown | ||||
| Tomato any flavor | Incompatible | ||||
| Platform | |||||
| Brand • Model • Rev | Ruckus Wireless VF7111 | ||||
| FCC ID | S9GVF7XX1 | ||||
| IC ID | 5912A-VF7XX1 | ||||
| Type | bridge | ||||
| CPU1 | Atheros AR9132 | ||||
| CPU1 Type | MIPS 24K | ||||
| CPU1 Speed | 400 MHz | ||||
| Flash1 Chip | STMicro 25P28V6P | ||||
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||
| RAM1 Size | 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||
| RAM1 Chip | Micron MT46V16M16-5B | ||||
| ETH chip1 | Atheros AR9132 | ||||
| Ethernet Port Count | 1-100MbE-LAN | ||||
| Wired Standard | IEEE 802.3i/3u | ||||
| Expansion IF types | none specified | ||||
| Power | 12 VDC, 1 A | ||||
| Connector type | barrel | ||||
|
| |||||
|
| |||||
| Other | |||||
|
Default IP address: 192.168.2.254 | |||||
| Retail | |||||
| FCC approval date | 10 July 2008 | ||||
| ASIN |
B003XSZV3W | ||||
| Radio 1 | |||||
| Chip1 | Atheros AR9132 | ||||
| Chip2 | Atheros AR9106 | ||||
| Wireless interface OUI | 00:24:82 | ||||
| Antenna Connector Type | none specified | ||||
| MIMO status | 2x2:2 | ||||
| Wireless Standard | IEEE 802.11a/n | ||||
| 802.11n | up to 300 Mbps | ||||
| 802.11a | up to 54 Mbps | ||||
| WiFi Operating Frequency | 5 GHz | ||||
| |||||
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Ruckus Wireless devices with specifications, see Ruckus Wireless.
- • 300 Mbps - 2SS 5GHz 802.11n (40MHz chan.) = A300 class
Overview
"Giterdone 8" is silkscreened on the component side of the board in the FCC photos.
- "POWERED BY RUCKUS WIRELESS" and "FAB 100-11118-001 REV 7" is on the back of the board.
The included power adapter appears to be a Ruckus Wireless P/N: 740-00005-001, DSA-12R-12 AUS 120120 (12V, 1A).
The default credentials specified in the manual as super:sp-admin.