StarFive VisionFive2 v1.3B
RISC-V Development Board | |||||||||||||||||
Homepage | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3rd Party Firmware | |||||||||||||||||
dd-wrt |
Status Unknown | ||||||||||||||||
OpenWrt | |||||||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||||||
Gargoyle |
Status Unknown | ||||||||||||||||
Platform | |||||||||||||||||
Brand • Model • Rev |
StarFive VisionFive2 (V1.3B) | ||||||||||||||||
Type |
single-board computer, development board | ||||||||||||||||
CPU1 |
StarFive JH7110 | ||||||||||||||||
CPU1 Type |
RISC-V (RV64GC) | ||||||||||||||||
CPU1 Speed |
1.5 GHz ( 4 cores ) 64-bit | ||||||||||||||||
Flash1 Chip |
GigaDevice GD25LQ128ESIG | ||||||||||||||||
Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI) | ||||||||||||||||
RAM1 Size |
8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> (LPDDR4 SDRAM) | ||||||||||||||||
RAM1 Chip |
Biwin BWMZCX32H2A-64G-X | ||||||||||||||||
ETH chip1 |
StarFive JH7110 | ||||||||||||||||
ETH chip2 |
Motorcomm YT8531C | ||||||||||||||||
ETH chip3 |
Motorcomm YT8531C | ||||||||||||||||
Ethernet Port Count |
2-1GbE-LAN | ||||||||||||||||
Wired Standard |
IEEE 802.3i/3u/3ab | ||||||||||||||||
| |||||||||||||||||
Stock bootloader |
U-Boot 2021.10 | ||||||||||||||||
Stock FW OS |
Linux 5.15.0 Debian | ||||||||||||||||
Expansion IF types |
M.2 (NGFF), USB 3.0, eMMC module connector, HDMI 2.0, Micro SD Card slot | ||||||||||||||||
Mini PCIe slots |
1 | ||||||||||||||||
USB ports |
5 | ||||||||||||||||
SD/MMC Slots |
1 | ||||||||||||||||
HDMI |
2 | ||||||||||||||||
USB Hub Compatible |
Untested | ||||||||||||||||
Power |
5 VDC, 6 A | ||||||||||||||||
Connector type |
USB (Type-C) Female | ||||||||||||||||
Serial Port (UART) |
yes, 3.3V TTL, via GPIO header, (115200 8N1) | ||||||||||||||||
Flags: HDMI 2.0, Micro SD Card slot, eMMC module connector, Audio out (3.5 mm), MIPI DSI, MIPI CSI, SPI, I2C, I2S, GPIO, UART, PoE expansion header | |||||||||||||||||
Additional chips | |||||||||||||||||
Other | |||||||||||||||||
Default IP address: acquired via DHCP | |||||||||||||||||
3rd Party Firmware Support | |||||||||||||||||
Retail | |||||||||||||||||
(Est.) release date | September 2022 | ||||||||||||||||
(Est.) initial retail price (in USD): | $85 | ||||||||||||||||
ASIN | B0BGM6STN8 | ||||||||||||||||
Country of manuf | China | ||||||||||||||||
|
Motorcomm not currently documented.
For a list of all currently documented StarFive chipsets with specifications, see StarFive.
For a list of all currently documented StarFive device with specifications, see StarFive.
Overview
"StarFive VisionFive 2 V1.3B" is silkscreened on board top.
Hardware specification
- CPU: StarFive JH7110 -U74x4 @1.5GHz
- SoC: Quad-Core RISC-V (RV64GC) 64-bit
- GPU: Imagination BXE-4-32 @600MHz
- (OpenGL ES3.2, OpenVG 1.2, Vulkan 1.2)
- VPU: H.264/H.265 decoder up to 4Kp30,
- H.265 encoder up to 1080p30
- Storage: 16MB (SPI) Flash (GigaDevice),
- TF card (max. 128GB)/MMC card slot
- Memory: 8GB (LPDDR4) SDRAM (Biwin)
- Network: 2x GbE ports (1x w/ PoE support)
- PCIe: NGFF M.2 (M-key) socket w/ PCIe 2.0
- USB: 4x USB 3.1 ports
- GPIO: 1x 40-pin headers
- Power Source: USB (Type-C) supporting USB
- PD 2.0 and Qualcomm Quick Charge 3.0 or
- 5V Power from the GPIO Pin 2 and 4 or
- via PoE via PoE expansion header
Links of Interest
- Documentation
- RISC-V based VisionFive 2 launched on LinuxGizmos
- StarFive VisionFive 2 quad-core RISC-V SBC launched on CNX|Software
- StarFive VisionFive 2 RISC-V SBC using Debian 12 on CNX|Software
- StarFive VisionFive 2 single-board PC on liliputing
- RISC-V Business: Testing StarFive's VisionFive 2 SBC on Jeff Gerling Blog
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
OpenWrt Target: starFive
OpenWrt Subtarget: generic
Support started version: ?
Current supported version: snapshot
Please insert instructions here
Pictures
See also
- CPU: StarFive JH7100 @1.0GHz
- CPU: StarFive JH7110 @1.5GHz
- StarFive
- Embedded system/single-board computer
- Embedded system/development board
- Embedded System StarFive
- Embedded System JH7110
- Embedded System RISC-V
- Embedded System (RV64GC)
- Embedded System YT8531C
- Embedded System Motorcomm
- Motorcomm
- OpenWrt Supported
- Wired Embedded System
- Embedded System
- English Documentation