Teleadapt Deskpoint Wireless 1 (TA-6900)

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bg (G54)
DeskPoint Wireless Version 1.0
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev Teleadapt Deskpoint Wireless v1
Model Part Number TA-6900
FCC ID PRL-TA6900
Type access point
CPU1 checkY Samsung S3C2510A
CPU1 Type ARM940T
CPU1 Speed 166 MHz
Flash1 Chip Brand? Model?
Flash1 Size ? MiB
RAM1 Size ? MiB
RAM1 Chip EtronTech Model?
ETH chip1 Samsung S3C2510A
ETH chip2 IC+ IP101A
ETH chip3 IC+ IP101A
Ethernet Port Count 1-100MbE-WAN
1-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: 00:09:92 (1 E, 1 W)
Ethernet OUI: 00:09:92 (1 E, 1 W)

Expansion IF types Mini PCI
Mini PCI slots 1
Power 5 VDC, 2 A
Connector type non-standard
Other
Manuf/OEM/ODM Interepoch
Retail
FCC approval date 09 November 2006
Country of manuf China
Radio 1
Radio1 module PESI WM233L
Radio1 module IF Mini PCI
Chip1 Ralink RT2561
Chip2 Ralink RT2527
Wireless interface OUI 00:09:92
Antenna Connector Type U.FL
Wireless Standard IEEE 802.11b/g
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Teleadapt Deskpoint Wireless 1 (TA-6900)SamsungRalinkRalink
Teleadapt Deskpoint Wireless 2 (TA-6950 / TA-7950 / TA-8050)RealtekRealtek

For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Samsung chipsets with specifications, see Samsung.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

The device is marketed towards usage in hotels as an in-room access point.

"WL-APE06-03" is silkscreened on the main board in the FCC photos.

"WM233L" and "41713-84104-B" is silkscreened on the wireless module.. indicating it is (likely) a PESI WM233L. A MAC label affixed to the card in the internal photos has an 00:0E:8E (SparkLAN) OUI.

The CPU used is presumed to be a S3C2510A. The two 10/100 PHYs appear to be IP101As..

The default SSID may be wireless (.. it is the value in the rather generic FCC manual) or deskpoint (used by the v2).