Ubiquiti Networks NanoStation AC loco (NS-5ACLW)

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
an+ac (AC867)
5GHz airMAX ac CPE
Homepage Product page
Wikipedia Ubiquiti Networks
WikiDevi.wi-cat.ru Ubiquiti Networks NanoStation AC loco (NS-5ACLW)
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
BrandModelRev Ubiquiti Networks NanoStation AC Loco
Model Part Number NS-5ACLW
FCC ID SWX-NS5ACLW
Type access point, CPE
CPU1 checkY Atheros AR9342
CPU1 Type MIPS 74Kc
CPU1 Speed 533 MHz
Flash1 Chip Macronix MX25L12835FZ2I-10G
Flash1 Size 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip EtronTech EM68816CWOH-25H
ETH chip1 Atheros AR9342
ETH chip2 Atheros AR8035
Ethernet Port Count 1-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Stock bootloader U-Boot
Stock FW OS airOS
Expansion IF types none specified
PoE Passive
Power 24 VDC, 0.5 A
Connector type Ethernet (PoE)
Serial Port (UART) yes, 4-pin header, 3.3V TTL, (115200 8N1)

Flags:
Wave2, MU-MIMO, VHT160

Other

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1359 additional devices
of which 21 are Ubiquiti Networks devices
Default login user: ubnt
Default login password: ubnt
ubnt:ubnt credentials used by 29 additional devices
of which 29 are Ubiquiti Networks devices

3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
FCC approval date 12 September 2017
ASIN B078NN1J4K
multiple uses
Radio 1
Chip1 Qualcomm Atheros QCA9882
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n/ac
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Ubiquiti Networks NanoStation AC (NS-5AC)AtherosQualcomm Atheros
Ubiquiti Networks NanoStation AC loco (NS-5ACL)AtherosQualcomm Atheros
Ubiquiti Networks NanoStation AC loco (NS-5ACLW)AtherosQualcomm Atheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented Ubiquiti Networks devices with specifications, see Ubiquiti Networks.

867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.) = AC867 class

Flashing

Flashing OpenWrt

Target: ath79
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 19.07.0
Current supported version: 25.12.0
LAN Hardware: Atheros AR9342
LAN Comment: Atheros AR8035 GbE Phy
WLAN Hardware: Atheros AR9342, Qualcomm Atheros QCA9888
WLAN Comment: WLAN 2.4GHz is a management radio, 5GHz 2x2:2 MIMO
Installation method(s):
U-Boot TFTP + serial recovery, see git-commit
Recovery method(s):
U-Boot TFTP + serial recovery
git • >>
ath79: Add support for Ubiquiti NanoStation AC loco
Atheros AR9342, 16 MB flash, 64 MB RAM

Successor to the old NanoStation M5 loco with AC wireless.

Includes a mac80211 patch for ath10k_pci because Ubiquiti uses a Ubiquiti
branded and customized QCA988X with vendor id 0777 and device id 11ac for
AC wireless.

Installation

1. Connect to serial header on device (8N1 115200)
2. Power on device and enter uboot console
3. Set up tftp server serving an openwrt initramfs build
4. Load initramfs build using the command tftpboot in the uboot cli
5. Boot the loaded image using the command bootm
6. Copy squashfs openwrt sysupgrade build to the booted device
7. Use mtd to write sysupgrade to partition "firmware"
8. Reboot and enjoy

See also

Models

Ubiquiti Networks
FCC ID: SWX-NS5AC (11/01/2017) • B07BFJBJQ7
FCC ID: SWX-NS5ACL (10/16/2017) • B078NN1J4K
FCC ID: SWX-NS5ACLW (09/12/2017) • B078NN1J4K
2.4GHz Indoor/Outdoor airMax 8dBi CPE • B00DCNRTAG
5GHz Indoor/Outdoor AirMax 13dBi CPE • B004EHSV4W