Ubiquiti Networks NanoStation Loco M2

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bgn (N300)
2.4GHz Indoor/Outdoor airMax 8dBi CPE
Ubiquiti Networks NanoStation Loco M2 01.jpg
Wikipedia Ubiquiti Networks
WikiDevi.wi-cat.ru Ubiquiti Networks NanoStation Loco M2
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Was Supported
Tomato any flavor Incompatible
Gargoyle Supported
Platform
BrandModelRev Ubiquiti Networks NanoStation Loco M2 xm
Model Part Number LOCOM2
FCC ID SWX-M2L
IC ID 6545A-M2L
Type access point
CPU1 checkY Atheros AR7240
CPU1 Type MIPS 24Kc
CPU1 Speed 400 MHz
Flash1 Chip Winbond W25Q64CVFIG
Flash1 Size 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip ESMT M13S2561616A
ETH chip1 Atheros AR7240
Ethernet Port Count 1-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types none specified
PoE non-standard (otherwise unspecified)
Power 24 VDC, 0.5 A
Connector type Ethernet (PoE)
Serial Port (UART) yes, (115200 8N1)
Other

Default SSID: ubnt
Default IP address: 192.168.1.20
the IP 192.168.1.20 is used by 11 additional devices
of which 9 are Ubiquiti Networks devices
Default login user: ubnt
Default login password: ubnt
ubnt:ubnt credentials used by 29 additional devices
of which 29 are Ubiquiti Networks devices

3rd Party Firmware Support DD-WRT • (List)
, Gargoyle
, OpenWrt (Was)
Retail
Availability End of Life
FCC approval date 30 September 2011
UPC 609728683597
(UPC DB, On eBay)
ASINs B00DCNRTAG Flag of the United States.svg
B004EGI3CI Flag of the United States.svg
Radio 1
Chip1 Atheros AR9287
Wireless interface OUI none specified
Antenna Connector Type U.FL
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Ubiquiti Networks NanoStation Loco M2AtherosAtheros
Ubiquiti Networks NanoStation Loco M2 xwAtherosAtheros
Ubiquiti Networks NanoStation Loco M5 xwAtherosAtheros
Ubiquiti Networks NanoStation Loco2AtherosAtheros
Ubiquiti Networks NanoStation Loco5AtherosAtherosAtheros
Ubiquiti Networks NanoStation M5 xwAtherosAtheros
Ubiquiti Networks NanoStation2AtherosAtheros
Ubiquiti Networks NanoStation3AtherosAtherosAtheros
Ubiquiti Networks NanoStation5AtherosAtherosAtheros
Ubiquiti Networks NanoStationM2 XMAtherosAtheros
Ubiquiti Networks NanoStationM2 XWAtherosAtheros
Ubiquiti Networks NanoStationM5 XMAtherosAtheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented Ubiquiti Networks devices with specifications, see Ubiquiti Networks.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

FCC test results

  • Radiated power (with antenna): 115 dBuV/m peak (802.11b CH1,CH11)
(this is indeed a high gain directional antenna)
  • Output power (before antenna): 22 dBm peak (802.11b CH6) (158.48mW)
(unit has >10dB output power flatness from CH1 to CH11
- shit RF PCB design/calibration)

Reg. third party firmware support

  • OpenWrt and Gargoyle (.. which is based on OpenWrt) firmware
should work fine on these devices.

Links of Interest

Wikis

  • M2 - Atheros AR7240/AR9283, 2x FE ports, 28dBm/11.2dBi
  • Loco M2 - Atheros AR7240/AR9287, 1x FE, 23dBm/8.5dBi
Like other UBNT devices, activation seems to be required.
Atheros AR724x device, DD-WRT wiki says AR7240,
WiFi chip is probably AR9287 (if not, AR9283)

Flashing

Flashing dd-wrt

Support started version: ?
Current supported version: ?

Please insert instructions here

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: ath79
OpenWrt Subtarget: tiny
OpenWrt Package architecture: mips_24kc
Support started version: 10.03.1
Current supported version: EOL
Last Supported Version: 22.03.7
Comment:
Final version: 22.03.7

Please insert instructions here

See also