YunCore CPE830
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |
---|---|
access point | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
YunCore CPE830 |
FCC ID |
none specified |
Type |
access point |
CPU1 ![]() |
Qualcomm Atheros QCA9531 |
CPU1 Type |
MIPS 24Kc |
CPU1 Speed |
535 MHz |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
Brand? Model? |
Ethernet Port Count |
2-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Expansion IF types |
none specified |
Power |
12 VDC, 1.5 A |
Other | |
| |
3rd Party Firmware Support | |
Radio 1 | |
Chip1 |
Qualcomm Atheros QCA9531 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented YunCore device with specifications, see YunCore.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
![]() | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
![]() | Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ar71xx-ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 17.01.0
Current supported version: snapshot
OpenWrt Target: ar71xx-ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 17.01.0
Current supported version: snapshot
Please insert instructions here