Hewlett Packard Enterprise MSM460 (J9621A)

multiple revisions of this device, use caution
abgn (AN900)
	Dual Radio 802.11n AP Wireless Access Point
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	HPE MSM460
Model Part Number	J9621A
FCC ID	RTP-MRLBB1003S, RTP-MRLBB1003, NKR-DNXAH1
IC ID	4891A-MRLBB1003
Board ID	48RNAA0P.SGC
Type	access point
CPU1	Freescale (NXP) P1020
CPU1 Type	Power
CPU1 Speed	667 MHz ( 2 cores ) 32-bit
Flash1 Chip	Micron MT29F1G08ABBDAHC:D
Flash1 Size	128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND)
RAM1 Size	256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (DDR3)
RAM1 Chip	Micron MT41J64M16JT-15E:G x 2
ETH chip1	Freescale (NXP) P1020
ETH chip2	Marvell 88E1310
Ethernet Port Count	1-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
	802dot11 OUI: A0:D3:C1 (-, 1 W); Ethernet OUI: A0:48:1C
Stock bootloader	U-Boot
Expansion IF types	Mini PCIe
Mini PCIe slots	2
PoE	802.3af, standard
Power	48 VDC, 0.5 A
Connector type	Ethernet (PoE)
Serial Port (UART)	yes, RJ45 console, (9600 8N1)
JTAG Port	probably
	Additional chips; 3-5.5V Multichannel RS232 Line Driver/Receiver;TI;MP223EC;;1;; 100MHz PCI Express Clock Synthesizer;Renesas;ICS841S104I;;1;; 1.5A Fast Transient Response Linear Regulator;ANPEC;APL5336;;1;; 802.3at PD w/ Synchronous No-Opto Flyback Controller;Linear Technology;LTC4269-1;;1;; Low Input Voltage, Synchronous Step-Down DC/DC Controller;Linear Technology;LTC3822-1;;1;; Dual 2-Phase, Synchronous Step-Down Controller;Linear Technology;LTC3836;;1;; Dual N-Channel Logic Level PWM MOSFET;Fairchild;FDS6898A;;1;; 20V, 10A P-Channel Enhanced Power MOSFET;ON Semi;NTMS10P02R2;;1;; 30V, 8A Dual N-Channel Enhanced MOSFET;ANPEC;APM7334;;2;; 30V, 21A N-Channel SyncFET;Fairchild;FDS6699S;;1;
Other
	Default IP address: 192.168.1.1; the IP 192.168.1.1 is used by 1359 additional devices; of which 2 are HPE devices; Default login user: admin; Default login password: admin; admin:admin credentials used by 1358 additional devices; of which 2 are HPE devices
Manuf/OEM/ODM	Wistron NeWeb
3rd Party Firmware Support	OpenWrt • (List \| Dev \| DLs);
Retail
Availability	End of Life
FCC approval date	13 December 2010
(Est.) release date	31 January 2011
UPC	885631740057 ; (UPC DB, On eBay);
ASIN	B004LNIUAY
Country of manuf	China
Physical
Dimensions	11 x 8.8 x 4.6 inches
Weight	11.6 ounces
Radio 1
Radio1 module	Unex DNXA-H1
Radio1 module IF	Mini PCIe
Chip1	Atheros AR9390
Wireless interface OUI	A0:D3:C1
Antenna Connector Type	U.FL, RP-SMA
MIMO status	3x3:3
Wireless Standard	IEEE 802.11a/b/g/n
802.11n	up to 450 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
Radio 2
Radio2 module	Unex DNXA-H1
Radio2 module IF	Mini PCIe
Chip1	Atheros AR9390
Wireless interface OUI	A0:D3:C1
Antenna Connector Type	U.FL, RP-SMA
MIMO status	3x3:3
Wireless Standard	IEEE 802.11a/n
802.11n	up to 450 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
Hewlett Packard Enterprise MSM430 (J9650A)	RTP-MRLBB1003S
Hewlett Packard Enterprise MSM466 (J9622A)	RTP-MRLBB1003S
HP 560 Access Point (J9845A)	RTP-MRLBB1303; RTP-MRLBB1003
HP MRLBB-1003	RTP-MRLBB1003
Hewlett Packard Enterprise MSM460 (J9590A)	RTP-MRLBB1003
JJPlus JWX6082	NKR-DNXAH1
LANCOM L-451	NKR-DNXAH1
LANCOM L-452dual	NKR-DNXAH1
Unex DNXA-H1	NKR-DNXAH1
Wistron NeWeb DNXA-G1	NKR-DNXAH1; NKR-DNXAG1; PY312200202
Wistron NeWeb DNXA-H1	NKR-DNXAH1

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.

For a list of all currently documented HPE devices with specifications, see HPE.

• 450 Mbps - 3SS 2.4GHz 802.11n (40MHz chan.),

• 450 Mbps - 3SS 5GHz 802.11n (40MHz chan.) = AN900 class

Overview

and "[G]48RNAA0P.SGC" is silkscreened on the board.

"48DNXA07.SGB", "(XB114_030)", "2010/05/31" is silkscreened

on the wireless modules (Atheros XB114 reference design).

This matches with Unex's ( / Wistron NeWeb's) DNXA-H1.

Three SiGe SE2595L Front-ends (FEM) are used per card.

WLAN Radio Module - Model: HP MRLBB-1003

The CPU may be a Freescale chip (P1020 PSE2HPA).

Wistron NeWeb is the presumed manufacturer.

The same hardware is used for the MSM430, MSM460, and MSM466.

The MSM430 is a two-stream only device (integral antennas).
The MSM460 is dual-band 3x3:3 capable with integral antennas.
The MSM466 is dual-band 3x3:3 device (multi-5GHz capable)

with RP-SMA connectors.

Hardware specification

CPU: Freescale (NXP) P1020 @667MHz

SoC: Dual-core PowerPC

Flash: 128MB (NAND)
Memory: 256MB (DDR3) SDRAM
Wi-Fi: Atheros AR9390

802.11abgn (2.4GHz) 3x3:3

Atheros AR9390

802.11an (5GHz) 3x3:3

Network: 1x GbE port
Power Source: 802.3af PoE

Links of Interest

Product page • Quick-start Guide Quick-start guide

Flashing

NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power.

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)

Target: mpc85xx
Subtarget: p1020
Package architecture: powerpc_8540
Supported Since Commit
Support started version: 23.05.2
Current supported version: 24.10.5

WLAN Hardware: 2x Atheros AR9390 (mini-PCIe)
WLAN Comment: Dual band 3x3:3
Installation method(s):
See git-commit
Recovery method(s):
U-Boot TFTP + serial recovery

git • >>

mpc85xx: add support for Hewlett Packard MSM460
Hardware
--------
CPU:  Freescale P1020 2xe500 PPC
RAM:  256M DDR3 (Micron MT41J64M16JT-15E:G "D9MNJ")
NAND: 128M (Micron 2CA1)
BTN:  1x Reset
LED:  Power - ETH - Radio1 - Radio2
UART: RJ-45 Cisco Pinout - 115200 8N1

Installation
------------
NOTE: You can find a repo with up-to-date instructions as well as
the required files here:

https://github.com/blocktrron/msm460-flashing

Required files
==============
You need a command-files as well as a U-Boot image.

The command-file has the following content (padded to 131072 bytes).

If you copy paste these, remove the newlines!

```
U-BOOT setenv ethaddr 02:03:04:05:06:07; setenv ipaddr 192.168.1.1;
setenv serverip 192.168.1.66; tftpboot 0x3000000 msm460-uboot.bin;
nand device; nand erase 0 0xC0000; nand write 0x3000000 0x0 0xC0000; reset
```

You can download the required U-Boot from this repository:

https://github.com/blocktrron/u-boot-msm/releases

Preparation
===========
Prepare a TFTP server serving two files:

 - U-Boot NAND image as `msm460-uboot.bin`.
 - OpenWrt factory image as `msm460-factory.bin`
 - Command-file names `commands.tftp`

You can start a TFTP server in the current directory using dnsmasq:

```bash
sudo dnsmasq --no-daemon --listen-address=0.0.0.0 \
    --port=0 --enable-tftp=enxd0 --tftp-root="$(pwd)" \
    --user=root --group=root
```
Replace `enxd0` with the name of your network interface.

Procedure
=========
1. Assign yourself the IP-Address 192.168.1.66/24.
3. Connect the Router to the PC while keeping the reset button
   pressed.
4. The LEDs will eventually begin to flash.
   They will start to flash faster after around 15 seconds.
5. Release the reset button.
6. Start a new shell
7. Make sure you are currently in the directory where the tftp server
   is located.
8. Run the following command:

```bash
tftp 192.168.1.1 -m binary -c put commands.tftp nflashd.cccc9999
```

You get the message "Transfer timed out."
To find out if you have been successful, please check the
blinking LED Pattern.

Signed-off-by: David Bauer

Hewlett Packard Enterprise MSM460 (J9621A)

Overview

Hardware specification

Links of Interest

Flashing

Flashing OpenWrt

See also

Navigation menu

Page actions

Page actions

Personal tools

empty section

Search

Navigation

data/misc

Tools

query forms

Shoutwiki

ShoutWiki messages