Linksys WRT32X
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC32002R) | |||||
---|---|---|---|---|---|
AC3200 MU-MIMO Dual-Band Gaming Router | |||||
Homepage | |||||
Support | |||||
Wikipedia | |||||
WikiDevi.wi-cat.ru | |||||
3rd Party Firmware | |||||
dd-wrt | |||||
OpenWrt | |||||
Tomato any flavor |
Incompatible | ||||
Gargoyle | |||||
Platform | |||||
Brand • Model • Rev |
Linksys WRT32X v1 (venom) | ||||
FCC ID | |||||
IC ID | |||||
Board ID |
48SAM203.SGD | ||||
Type |
wireless router | ||||
CPU1 |
Marvell 88F6820 | ||||
CPU1 Type |
ARMv7 Cortex-A9 | ||||
CPU1 Speed |
1.8 GHz ( 2 cores ) | ||||
Flash1 Chip |
Winbond W29N02GV | ||||
Flash1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (NAND) | ||||
RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3) | ||||
RAM1 Chip |
Micron Model? x 2 | ||||
ETH chip1 |
Marvell 88F6820 | ||||
Switch |
Marvell 88E6352 | ||||
Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN | ||||
Wired Standard |
IEEE 802.3i/3u/3ab | ||||
Stock bootloader |
U-Boot | ||||
Stock FW OS |
Linux 4.4.14 | ||||
Expansion IF types |
USB 3.0, USB 2.0 / eSATA (combo port) | ||||
USB ports |
2 | ||||
eSATA Ports |
1 | ||||
USB Hub Compatible |
Untested | ||||
Power |
12 VDC, 3 A | ||||
Connector type |
barrel | ||||
Serial Port (UART) |
yes, 6-pin header | ||||
JTAG Port |
yes, 20-pad header | ||||
Flags: Wave2, MU-MIMO, VHT160, AP3200, DFS | |||||
Other | |||||
Default IP address: 192.168.1.1 | |||||
Manuf/OEM/ODM | |||||
3rd Party Firmware Support | |||||
Retail | |||||
Availability | End of Life | ||||
FCC approval date | 12 June 2017 | ||||
(Est.) release date | 03 January 2017 | ||||
(Est.) initial retail price (in USD): | $330 | ||||
Newegg | N82E16833124643 | ||||
ASINs |
B072LQZFHM B079XSHN1F | ||||
Country of manuf | China | ||||
Physical | |||||
Dimensions |
245.9 x 193.8 x 51.8 mm | ||||
Weight |
798.32 g | ||||
Radio 1 | |||||
Chip1 |
Marvell 88W8964 | ||||
Wireless interface OUI |
60:38:E0 | ||||
Antenna Connector Type |
U.FL, RP-SMA | ||||
MIMO status |
4x4:3 | ||||
Wireless Standard |
IEEE 802.11b/g/n | ||||
N-QAM |
up to 600 Mbps | ||||
802.11n |
up to 450 Mbps | ||||
802.11g |
up to 54 Mbps | ||||
802.11b |
up to 11 Mbps | ||||
WiFi Operating Frequency |
2.4 GHz | ||||
Radio 2 | |||||
Chip1 |
Marvell 88W8964 | ||||
Wireless interface OUI |
60:38:E0 | ||||
Antenna Connector Type |
U.FL, RP-SMA | ||||
MIMO status |
4x4:3 | ||||
Wireless Standard |
IEEE 802.11a/n/ac | ||||
AC-QAM |
up to 2600 Mbps | ||||
802.11ac |
up to 1300 Mbps | ||||
802.11n |
up to 450 Mbps | ||||
802.11a |
up to 54 Mbps | ||||
WiFi Operating Frequency |
5 GHz | ||||
|
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Linksys device with specifications, see Linksys.
Overview
Added to the FCC entry for the Linksys WRT3200ACM
C2PC: - Adding a new model name: Linksys WRT32X
- - Changing the firmware for the new model
- - Changing the enclosure color for the new model
- This device has 20/40/80/160 MHz bandwidth modes.
Specifications
- CPU: Marvell 88F6820-A0 C180 @1.8 GHz (Armada 385)
- Flash: 256MB (NAND), RAM: 512MB (DDR3)
- WLAN: 2x Marvell 88W8964 4T4R 802.11abgn/ac (MU-MIMO)
- Switch: Marvell 88E6352 (7-Port AVB GbE Switch, 5x GbE PHY)
- PSU: 12V/3A; LED: Status light behavior
- Dimensions: 245.9 x 193.8 x 51.8 mm (w/o antennas)
- Weight: 798.32 g (28.16 oz)
Links of Interest
Wikis
Reviews
- Linksys WRT32X AC3200 Wireless Gaming Router on TweakTown
- Linksys WRT32X Wi-Fi router review on WindowsCentral
News
- Linksys Re-launches WRT32X Gaming router on SNB forums
- Killer Prioritization Engine - Linksys WRT32X on KillerNetworking
- Linksys WRT32X Announced on AnandTech
- CPU Marvell ARMADA 38x @1.8GHz Dual-Core ARM (Cortex A9)
- 256MB Flash and 512MB of DDR3 Memory
- Dual-Band AC3200 (N600 + AC2600) 3x3 radio (2.4/5GHz)
- Tri-Stream 160 radio belong to the Marvell Avastar 88W8964
- 4x high-performance antennas and high-powered PAs for better range
- 5-port SOHO-grade Gigabit Ethernet switch with TCAM (1x WAN, 4x LAN)
- USB 3.0, USB 2.0 and eSATA ports for NAS-like network storage
- MU-MIMO Technology for Airtime efficiency, QoS engine powered by Killer Networking
- Exclusive optimization for Killer Networking gaming clients in MSI, Alienware, Razer
- DFS certified for operation in the clear DFS channel airspace
- Custom-built firmware specially tuned for online gaming traffic
Third party firmware information
- OpenWrt build target: mvebu
- DD-WRT build target: linksys-wrt32x
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Supported by dd-wrt as of = wrt32x build 33413 20170927
Please insert instructions here
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: mvebu
OpenWrt Subtarget: cortexa9
OpenWrt Package architecture: arm_cortex-a9_vfpv3
Support started version: 18.06.0
Current supported version: 23.05.4
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: mvebu
OpenWrt Subtarget: cortexa9
OpenWrt Package architecture: arm_cortex-a9_vfpv3
Support started version: 18.06.0
Current supported version: 23.05.4
Please insert instructions here
JTAG-Serial Info
Serial
Stock firmware boot log
dmesg from firmware 1.0.180404.58 >> • |
---|
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.14 (jenkins@ip-10-226-178-37) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 50140) ) #4 SMP Wed Apr 4 18:23:44 UTC 2018 [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Linksys WRT32X [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] free_area_init_node: node 0, pgdat c05cdec0, node_mem_map dfbf9000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 12 pages/cpu @dfbcf000 s17984 r8192 d22976 u49152 [ 0.000000] pcpu-alloc: s17984 r8192 d22976 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console= root=/dev/mtdblock8 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 513212K/524288K available (4096K kernel code, 173K rwdata, 1532K rodata, 256K init, 295K bss, 11076K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0587418 (5630 kB) [ 0.000000] .init : 0xc0588000 - 0xc05c8000 ( 256 kB) [ 0.000000] .data : 0xc05c8000 - 0xc05f3434 ( 174 kB) [ 0.000000] .bss : 0xc05f3434 - 0xc063d12c ( 296 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 D prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001 [ 0.000000] Selected CPU frequency (16) unsupported [ 0.000000] Switching to timer-based delay loop, resolution 40ns [ 0.000002] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns [ 0.000007] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns [ 0.000102] Calibrating local timer... 933.11MHz. [ 0.060025] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) [ 0.060029] pid_max: default: 32768 minimum: 301 [ 0.060064] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.060068] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.060229] CPU: Testing write buffer coherency: ok [ 0.060318] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.060339] Setting up static identity map for 0x8280 - 0x82d8 [ 0.060404] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4 [ 0.060468] mvebu-pmsu: Initializing Power Management Service Unit [ 0.060806] Booting CPU 1 [ 0.060956] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.060978] Brought up 2 CPUs [ 0.060983] SMP: Total of 2 processors activated (100.00 BogoMIPS). [ 0.060986] CPU: All CPU(s) started in SVC mode. [ 0.062403] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.062467] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.062500] pinctrl core: initialized pinctrl subsystem [ 0.062768] NET: Registered protocol family 16 [ 0.063173] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.090030] cpuidle: using governor ladder [ 0.092195] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling [ 0.092202] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling [ 0.110396] reg-fixed-voltage xhci0-vbus: could not find pctldev for node /soc/internal-regs/pinctrl@18000/xhci0-vbus-pins, deferring probe [ 0.110538] SCSI subsystem initialized [ 0.110599] libata version 3.00 loaded. [ 0.110705] usbcore: registered new interface driver usbfs [ 0.110731] usbcore: registered new interface driver hub [ 0.110752] usbcore: registered new device driver usb [ 0.111209] clocksource: Switched to clocksource armada_370_xp_clocksource [ 0.111576] NET: Registered protocol family 2 [ 0.111769] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.111791] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.111819] TCP: Hash tables configured (established 4096 bind 4096) [ 0.111840] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.111853] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.111916] NET: Registered protocol family 1 [ 0.111933] PCI: CLS 0 bytes, default 64 [ 0.112260] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.114167] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.114174] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.114791] io scheduler noop registered [ 0.114797] io scheduler deadline registered (default) [ 0.115158] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver [ 0.115435] irq: Cannot allocate irq_descs @ IRQ45, assuming pre-allocated [ 0.115554] irq: Cannot allocate irq_descs @ IRQ77, assuming pre-allocated [ 0.115819] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00 [ 0.115826] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 0.115830] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff] [ 0.115835] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.115847] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400 [ 0.115926] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400 [ 0.115993] PCI: bus0: Fast back to back transfers disabled [ 0.115998] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.116004] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.116053] pci 0000:01:00.0: [11ab:2b40] type 00 class 0x020000 [ 0.116080] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x401fffff 64bit pref] [ 0.116090] pci 0000:01:00.0: reg 0x18: [mem 0x40200000-0x402fffff 64bit pref] [ 0.116139] pci 0000:01:00.0: supports D1 D2 [ 0.116143] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.116197] PCI: bus1: Fast back to back transfers disabled [ 0.116203] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.116257] pci 0000:02:00.0: [11ab:2b40] type 00 class 0x020000 [ 0.116291] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x421fffff 64bit pref] [ 0.116303] pci 0000:02:00.0: reg 0x18: [mem 0x42200000-0x422fffff 64bit pref] [ 0.116369] pci 0000:02:00.0: supports D1 D2 [ 0.116372] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.116432] PCI: bus2: Fast back to back transfers disabled [ 0.116436] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 0.116479] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff] [ 0.116484] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe06fffff] [ 0.116491] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit pref] [ 0.116499] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff 64bit pref] [ 0.116507] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.116512] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe02fffff] [ 0.116518] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe05fffff 64bit pref] [ 0.116527] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0600000-0xe06fffff 64bit pref] [ 0.116535] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.116539] pci 0000:00:02.0: bridge window [mem 0xe0400000-0xe06fffff] [ 0.116624] mv_xor f1060800.xor: Marvell shared XOR driver [ 0.151584] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) [ 0.151665] mv_xor f1060900.xor: Marvell shared XOR driver [ 0.191565] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) [ 0.191698] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.211987] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 21, base_baud = 12500000) is a 16550A [ 0.212293] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 0.212300] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 0.212886] scsi host0: ahci-mvebu [ 0.213014] scsi host1: ahci-mvebu [ 0.213091] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41 [ 0.213095] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41 [ 0.213437] pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device [ 0.213768] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda [ 0.213772] nand: AMD/Spansion S34ML02G2 [ 0.213776] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 [ 0.213782] pxa3xx-nand f10d0000.flash: ECC strength 16, ECC step size 2048 [ 0.213969] Bad block table found at page 131008, version 0x01 [ 0.214303] Bad block table found at page 130944, version 0x01 [ 0.214559] 10 ofpart partitions found on MTD device pxa3xx_nand-0 [ 0.214563] Creating 10 MTD partitions on "pxa3xx_nand-0": [ 0.214567] 0x000000000000-0x000000200000 : "u-boot" [ 0.214846] 0x000000200000-0x000000220000 : "u_env" [ 0.215117] 0x000000220000-0x000000260000 : "s_env" [ 0.215342] 0x000000260000-0x000000820000 : "unused_area" [ 0.215575] 0x0000007e0000-0x000000820000 : "devinfo" [ 0.215808] 0x000000900000-0x000008400000 : "kernel1" [ 0.216088] 0x000000c00000-0x000008400000 : "rootfs1" [ 0.216355] 0x000008400000-0x00000ff00000 : "kernel2" [ 0.216677] 0x000008700000-0x00000ff00000 : "ubi" [ 0.216960] 0x00000ff00000-0x000010000000 : "BBT" [ 0.217562] libphy: Fixed MDIO Bus: probed [ 0.217647] libphy: orion_mdio_bus: probed [ 0.217774] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled [ 0.219357] mvneta f1034000.ethernet eth0: Using hardware mac address 60:38:e0:00:00:00 [ 0.220564] mvneta f1070000.ethernet eth1: Using hardware mac address 60:38:e0:00:00:00 [ 0.220613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.220618] ehci-pci: EHCI PCI platform driver [ 0.220646] ehci-platform: EHCI generic platform driver [ 0.220723] ehci-orion: EHCI orion driver [ 0.220790] orion-ehci f1058000.usb: EHCI Host Controller [ 0.220802] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1 [ 0.220857] orion-ehci f1058000.usb: irq 36, io mem 0xf1058000 [ 0.231210] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00 [ 0.231435] hub 1-0:1.0: USB hub found [ 0.231449] hub 1-0:1.0: 1 port detected [ 0.231769] usbcore: registered new interface driver usb-storage [ 0.231893] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0 [ 0.232004] i2c /dev entries driver [ 0.243438] orion_wdt: Initial timeout 171 sec [ 0.246513] marvell-cesa f1090000.crypto: CESA device successfully registered [ 0.246963] NET: Registered protocol family 10 [ 0.247353] NET: Registered protocol family 17 [ 0.247371] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 0.247376] 8021q: 802.1Q VLAN Support v1.8 [ 0.247417] Registering SWP/SWPB emulation handler [ 0.248126] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 0.248140] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2 [ 0.248233] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010 [ 0.248253] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000 [ 0.248501] hub 2-0:1.0: USB hub found [ 0.248528] hub 2-0:1.0: 1 port detected [ 0.248606] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 0.248614] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3 [ 0.248642] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.248821] hub 3-0:1.0: USB hub found [ 0.248847] hub 3-0:1.0: 1 port detected [ 0.249166] UBI: auto-attach mtd8 [ 0.249171] ubi0: attaching mtd8 [ 0.561208] ata2: SATA link down (SStatus 0 SControl 300) [ 0.561233] ata1: SATA link down (SStatus 0 SControl 300) [ 0.569363] ubi0: scanning is finished [ 0.573855] ubi0: attached mtd8 (name "ubi", size 120 MiB) [ 0.573859] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 0.573862] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 0.573865] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 0.573868] ubi0: good PEBs: 960, bad PEBs: 0, corrupted PEBs: 0 [ 0.573871] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 0.573874] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1718014600 [ 0.573877] ubi0: available PEBs: 0, total reserved PEBs: 960, PEBs reserved for bad PEB handling: 40 [ 0.573894] ubi0: background thread "ubi_bgt0d" started, PID 552 [ 0.574312] block ubiblock0_0: created from ubi0:0(rootfs) [ 0.574316] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem [ 0.574509] mvsw61xx 10.mvsw61xx: Found MV88E6352 at f1072004.mdio-mi:10 [ 0.574513] mvsw61xx 10.mvsw61xx: Using direct addressing [ 0.574559] armada38x-rtc f10a3800.rtc: setting system clock to 2097-08-03 20:21:52 UTC (4026399712) [ 0.575125] Warning: unable to open an initial console. [ 0.576669] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 0.576785] Freeing unused kernel memory: 256K (c0588000 - c05c8000) [ 0.616007] random: nonblocking pool is initialized [ 0.670290] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd [ 0.688802] usb-storage 3-1:1.0: USB Mass Storage device detected [ 0.688907] scsi host2: usb-storage 3-1:1.0 [ 0.800612] init: Console is alive [ 0.800666] init: - watchdog - [ 1.116083] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.116333] ohci-platform: OHCI generic platform driver [ 1.116763] uhci_hcd: USB Universal Host Controller Interface driver [ 1.122810] init: - preinit - [ 1.237912] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 638 [ 1.258896] UBIFS (ubi0:1): recovery needed [ 1.321032] UBIFS (ubi0:1): recovery completed [ 1.321064] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 1.321068] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 1.321073] UBIFS (ubi0:1): FS size: 106151936 bytes (101 MiB, 836 LEBs), journal size 5332992 bytes (5 MiB, 42 LEBs) [ 1.321076] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB) [ 1.321081] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID F486C5A8-F37B-4B9F-83CF-0745E287681B, small LPT model [ 1.324917] mount_root: switching to jffs2 overlay [ 1.333188] procd: - early - [ 1.333213] procd: - watchdog - [ 1.869976] scsi 2:0:0:0: Direct-Access Seagate BUP Slim BK 0143 PQ: 0 ANSI: 6 [ 1.870797] sd 2:0:0:0: [sda] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.871338] sd 2:0:0:0: [sda] Write Protect is off [ 1.871345] sd 2:0:0:0: [sda] Mode Sense: 2b 00 10 08 [ 1.871881] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.879878] sda: sda1 [ 1.881569] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.381756] procd: failed to set stdio [ 2.381773] procd: - ubus - [ 2.434283] procd: - init - [ 2.951813] NET: Registered protocol family 8 [ 2.951820] NET: Registered protocol family 20 [ 2.953842] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 2.955387] tun: Universal TUN/TAP device driver, 1.6 [ 2.955392] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.956770] gre: GRE over IPv4 demultiplexor driver [ 2.957099] ip_gre: GRE over IPv4 tunneling driver [ 2.958481] PPP generic driver version 2.4.2 [ 2.959537] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.966016] u32 classifier [ 2.966021] input device check on [ 2.966023] Actions configured [ 2.966401] Mirror/redirect action on [ 2.967828] nf_conntrack version 0.5.0 (8022 buckets, 32088 max) [ 2.974514] fuse init (API version 7.23) [ 3.039683] pci 0000:00:01.0: enabling device (0140 -> 0142) [ 3.046461] wlprobe wlpptr->ioBase0 = e3580000 [ 3.046482] wlprobe wlpptr->ioBase1 = e3800000 [ 3.046617] wlInit wlpptr->pCmdBuf = dca94000 wlpptr->wlpd_p->pPhysCmdBuf = 1ca94000 [ 3.061091] Physical loc =0x17790000 [ 3.061114] mrvl pri mailbox Physical loc =0x0x1779f000 [ 3.061123] fw file: /lib/firmware/wlan-v9_8964/W8964.bin [ 3.061128] read img file... [ 3.260496] FW len = 449468 [ 3.261506] fw download start 88 [ 3.261509] init ddr... [ 3.398968] FwSize = 449468 downloaded Size = 449468 currIteration 65522 [ 3.654151] 0;0;0;0;0;0;0;0;0;0;0;wlFwDownload complete [ 6.267007] wlFwGetHwSpecs pCmd = dca94000 [ 6.267129] Mac address = 60:38:e0:00:00:00 [ 6.267131] Mac_Init [ 6.277206] wlFwSetHwSpecs ... [ 6.277215] -->pPhysTxRing = 0x1b430000 [ 6.277218] -->pPhysTxDoneRing = 0x1e22a000 [ 6.277220] -->pPhysRxRing = 0x1b460000 [ 6.277221] -->pPhysRxDoneRing = 0x1b480000 [ 6.277223] -->pPhysAcntRing = 0x1b440000 [ 6.277226] -->num tx desc 2048 num rx desc 16384 [ 6.307622] [wlInit_monif] wlinitcnt=0, vmacIndex=17 [ 6.307899] pci 0000:00:02.0: enabling device (0140 -> 0142) [ 6.316303] wlprobe wlpptr->ioBase0 = e3980000 [ 6.316325] wlprobe wlpptr->ioBase1 = e3c00000 [ 6.316477] wlInit wlpptr->pCmdBuf = d6b10000 wlpptr->wlpd_p->pPhysCmdBuf = 16b10000 [ 6.331009] Physical loc =0x12680000 [ 6.331032] mrvl pri mailbox Physical loc =0x0x1268f000 [ 6.331036] fw file: /lib/firmware/wlan-v9_8964/W8964.bin [ 6.331039] read img file... [ 6.525168] FW len = 449468 [ 6.526178] fw download start 88 [ 6.526183] init ddr... [ 6.667201] FwSize = 449468 downloaded Size = 449468 currIteration 65527 [ 6.922575] 0;0;0;0;wlFwDownload complete [ 7.859859] wlFwGetHwSpecs pCmd = d6b10000 [ 7.859985] Mac address = 60:38:e0:00:00:00 [ 7.859987] Mac_Init [ 7.870191] wlFwSetHwSpecs ... [ 7.870199] -->pPhysTxRing = 0x16b20000 [ 7.870202] -->pPhysTxDoneRing = 0x16b0e000 [ 7.870204] -->pPhysRxRing = 0x16b60000 [ 7.870206] -->pPhysRxDoneRing = 0x16b80000 [ 7.870208] -->pPhysAcntRing = 0x16b30000 [ 7.870210] -->num tx desc 2048 num rx desc 16384 [ 7.901321] [wlInit_monif] wlinitcnt=1, vmacIndex=17 [ 7.904474] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.953385] nf_conntrack_rtsp v0.7 loading [ 8.092700] nf_nat_rtsp v0.7 loading [ 8.094478] PPP MPPE Compression module registered [ 8.095240] NET: Registered protocol family 24 [ 8.095686] PPTP driver version 0.8.5 [ 8.096673] usbcore: registered new interface driver ums-alauda [ 8.096898] usbcore: registered new interface driver ums-cypress [ 8.097163] usbcore: registered new interface driver ums-datafab [ 8.097396] usbcore: registered new interface driver ums-freecom [ 8.097663] usbcore: registered new interface driver ums-isd200 [ 8.098017] usbcore: registered new interface driver ums-jumpshot [ 8.098263] usbcore: registered new interface driver ums-karma [ 8.098621] usbcore: registered new interface driver ums-sddr09 [ 8.098878] usbcore: registered new interface driver ums-sddr55 [ 8.099175] usbcore: registered new interface driver ums-usbat [ 8.106411] xt_time: kernel timezone is -0000 [ 9.532039] Using Device Region Code! [ 9.532049] setting rxantenna 0x0, 0xf [ 9.540081] setting txantenna 0x0, 0xf [ 9.540774] req ring: vBase=0xd1c33000 pBase=11c33000 [ 9.540777] req ring: vBase=0xd6937000 pBase=16937000 [ 9.540800] OffChanReqHead = c007f880 [ 9.540800] OffChanReqTail = c007f884 [ 9.540800] OffChanDoneHead = c007f888 [ 9.540800] OffChanDoneTail = c007f88c [ 9.601799] Stop client netdev = 0 [ 9.602579] setting rxantenna 0x0, 0xf [ 9.602608] setting txantenna 0x0, 0xf [ 9.611338] req ring: vBase=0xd1c33000 pBase=11c33000 [ 9.611351] req ring: vBase=0xd6937000 pBase=16937000 [ 9.611382] OffChanReqHead = c007f880 [ 9.611382] OffChanReqTail = c007f884 [ 9.611382] OffChanDoneHead = c007f888 [ 9.611382] OffChanDoneTail = c007f88c [ 9.613967] Using Device Region Code! [ 9.613978] setting rxantenna 0x0, 0xf [ 9.614003] setting txantenna 0x0, 0xf [ 9.614765] req ring: vBase=0xd75cb000 pBase=175cb000 [ 9.614769] req ring: vBase=0xd1d0c000 pBase=11d0c000 [ 9.614795] OffChanReqHead = c007f880 [ 9.614795] OffChanReqTail = c007f884 [ 9.614795] OffChanDoneHead = c007f888 [ 9.614795] OffChanDoneTail = c007f88c [ 9.641186] Stop client netdev = 0 [ 9.641889] setting rxantenna 0x0, 0xf [ 9.649297] setting txantenna 0x0, 0xf [ 9.657324] req ring: vBase=0xd75cb000 pBase=175cb000 [ 9.657327] req ring: vBase=0xd1d0c000 pBase=11d0c000 [ 9.657352] OffChanReqHead = c007f880 [ 9.657352] OffChanReqTail = c007f884 [ 9.657352] OffChanDoneHead = c007f888 [ 9.657352] OffChanDoneTail = c007f88c [ 10.461795] device eth1 entered promiscuous mode [ 10.463026] br-lan: port 1(eth1) entered forwarding state [ 10.463038] br-lan: port 1(eth1) entered forwarding state [ 10.478406] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.651837] HTB: quantum of class 1000001 is big. Consider r2q change. [ 10.788925] HTB: quantum of class 1000001 is big. Consider r2q change. [ 11.004860] Setting Region Code not supported! [ 11.022525] Setting 20/40 Coexist on [ 11.023612] bftype is 6 [ 11.065563] Stop client netdev = 0 [ 11.066247] setting rxantenna 0xf, 0xf [ 11.084352] setting txantenna 0x0, 0xf [ 11.115209] ptr->ch_width=1,ptr->center_freq0=42,ptr->center_freq1=0 [ 11.115216] Build_IE_192 80MHz or less [ 11.115687] req ring: vBase=0xd1c33000 pBase=11c33000 [ 11.115690] req ring: vBase=0xd6937000 pBase=16937000 [ 11.115713] OffChanReqHead = c007f880 [ 11.115713] OffChanReqTail = c007f884 [ 11.115713] OffChanDoneHead = c007f888 [ 11.115713] OffChanDoneTail = c007f88c [ 11.115813] WLAN(wdev0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 11.143897] ptr->ch_width=1,ptr->center_freq0=42,ptr->center_freq1=0 [ 11.143904] Build_IE_192 80MHz or less [ 11.144716] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=0 WLANID=0 [ 11.441221] br-lan: port 1(eth1) entered disabled state [ 12.111248] finished scanning channel 36, traffic cnt 22289, bbu cnt 31553 [ 12.341246] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 12.341822] ptr->ch_width=1,ptr->center_freq0=42,ptr->center_freq1=0 [ 12.341827] Build_IE_192 80MHz or less [ 12.342523] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=0 WLANID=0 [ 12.342867] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 12.342899] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 2 [ 12.389014] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 12.389507] ptr->ch_width=1,ptr->center_freq0=42,ptr->center_freq1=0 [ 12.389511] Build_IE_192 80MHz or less [ 12.390346] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=0 WLANID=0 [ 12.390770] after ieee80211wRequired=0 ieee80211w=0 [ 12.391337] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 12.391812] ptr->ch_width=1,ptr->center_freq0=42,ptr->center_freq1=0 [ 12.391816] Build_IE_192 80MHz or less [ 12.392639] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=0 WLANID=0 [ 12.451239] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off [ 12.451264] br-lan: port 1(eth1) entered forwarding state [ 12.451285] br-lan: port 1(eth1) entered forwarding state [ 12.471354] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 12.471378] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 12.618218] Setting Region Code not supported! [ 12.621273] finished scanning channel 40, traffic cnt 101, bbu cnt 1841 [ 12.639761] Setting 20/40 Coexist on [ 12.640856] bftype is 6 [ 12.676485] Stop client netdev = 0 [ 12.677174] setting rxantenna 0xf, 0xf [ 12.694582] setting txantenna 0x0, 0xf [ 12.721753] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0 [ 12.721757] Build_IE_192 80MHz or less [ 12.722217] req ring: vBase=0xd75cb000 pBase=175cb000 [ 12.722219] req ring: vBase=0xd1d0c000 pBase=11d0c000 [ 12.722244] OffChanReqHead = c007f880 [ 12.722244] OffChanReqTail = c007f884 [ 12.722244] OffChanDoneHead = c007f888 [ 12.722244] OffChanDoneTail = c007f88c [ 12.722368] WLAN(wdev1): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 12.748746] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0 [ 12.748753] Build_IE_192 80MHz or less [ 12.749578] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=1 WLANID=0 [ 13.131251] finished scanning channel 44, traffic cnt 28826, bbu cnt 39088 [ 13.641247] finished scanning channel 48, traffic cnt 1924, bbu cnt 6069 [ 13.721340] finished scanning channel 1, traffic cnt 19008, bbu cnt 208033 [ 13.901291] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 13.901905] ptr->ch_width=1,ptr->center_freq0=42,ptr->center_freq1=0 [ 13.901910] Build_IE_192 80MHz or less [ 13.902801] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=0 WLANID=0 [ 13.903179] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 13.903199] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 2 [ 13.950227] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 13.950734] ptr->ch_width=1,ptr->center_freq0=42,ptr->center_freq1=0 [ 13.950738] Build_IE_192 80MHz or less [ 13.951602] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=0 WLANID=0 [ 13.952070] after ieee80211wRequired=0 ieee80211w=0 [ 13.952590] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 13.953070] ptr->ch_width=1,ptr->center_freq0=42,ptr->center_freq1=0 [ 13.953074] Build_IE_192 80MHz or less [ 13.953898] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=0 WLANID=0 [ 14.071272] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 14.071819] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0 [ 14.071824] Build_IE_192 80MHz or less [ 14.072516] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=1 WLANID=0 [ 14.072669] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 14.072704] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 2 [ 14.119354] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 14.119835] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0 [ 14.119839] Build_IE_192 80MHz or less [ 14.120665] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=1 WLANID=0 [ 14.121125] after ieee80211wRequired=0 ieee80211w=0 [ 14.121866] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 14.122339] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0 [ 14.122344] Build_IE_192 80MHz or less [ 14.123140] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=1 WLANID=0 [ 14.141249] finished scanning channel 149, traffic cnt 17156, bbu cnt 19385 [ 14.221273] finished scanning channel 2, traffic cnt 8090, bbu cnt 99495 [ 14.451294] br-lan: port 1(eth1) entered forwarding state [ 14.651266] finished scanning channel 153, traffic cnt 4660, bbu cnt 6267 [ 14.721280] finished scanning channel 3, traffic cnt 3460, bbu cnt 64587 [ 15.043212] HTB: quantum of class 1000001 is big. Consider r2q change. [ 15.161268] finished scanning channel 157, traffic cnt 6460, bbu cnt 10559 [ 15.221273] finished scanning channel 4, traffic cnt 4172, bbu cnt 70997 [ 15.671264] finished scanning channel 161, traffic cnt 368, bbu cnt 1783 [ 15.721278] finished scanning channel 5, traffic cnt 9234, bbu cnt 96581 [ 16.171262] Stop client netdev = 0 [ 16.171279] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 16.172272] setting rxantenna 0xf, 0xf [ 16.192961] setting txantenna 0x0, 0xf [ 16.229807] finished scanning channel 6, traffic cnt 20726, bbu cnt 163614 [ 16.237036] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0 [ 16.237040] Build_IE_192 80MHz or less [ 16.237529] req ring: vBase=0xd1c33000 pBase=11c33000 [ 16.237534] req ring: vBase=0xd6937000 pBase=16937000 [ 16.237559] OffChanReqHead = c007f880 [ 16.237559] OffChanReqTail = c007f884 [ 16.237559] OffChanDoneHead = c007f888 [ 16.237559] OffChanDoneTail = c007f88c [ 16.237829] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0 [ 16.237833] Build_IE_192 80MHz or less [ 16.238770] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=0 WLANID=0 [ 16.731262] finished scanning channel 7, traffic cnt 4433, bbu cnt 72738 [ 17.231264] finished scanning channel 8, traffic cnt 7803, bbu cnt 201845 [ 17.731259] finished scanning channel 9, traffic cnt 705, bbu cnt 55527 [ 18.231258] finished scanning channel 10, traffic cnt 5245, bbu cnt 143547 [ 18.731258] finished scanning channel 11, traffic cnt 20492, bbu cnt 162907 [ 19.231291] Stop client netdev = 0 [ 19.231304] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 19.232318] setting rxantenna 0xf, 0xf [ 19.250007] setting txantenna 0x0, 0xf [ 19.284465] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0 [ 19.284470] Build_IE_192 80MHz or less [ 19.284929] req ring: vBase=0xd75cb000 pBase=175cb000 [ 19.284932] req ring: vBase=0xd1d0c000 pBase=11d0c000 [ 19.284958] OffChanReqHead = c007f880 [ 19.284958] OffChanReqTail = c007f884 [ 19.284958] OffChanDoneHead = c007f888 [ 19.284958] OffChanDoneTail = c007f88c [ 19.285261] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0 [ 19.285265] Build_IE_192 80MHz or less [ 19.286133] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=1 WLANID=0 [ 22.430981] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 22.600232] Setting Region Code not supported! [ 22.611143] Setting 20/40 Coexist on [ 22.612409] bftype is 6 [ 22.647816] Stop client netdev = 0 [ 22.648498] setting rxantenna 0xf, 0xf [ 22.666417] setting txantenna 0x0, 0xf [ 22.694668] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0 [ 22.694672] Build_IE_192 80MHz or less [ 22.695115] req ring: vBase=0xd1c33000 pBase=11c33000 [ 22.695118] req ring: vBase=0xd6937000 pBase=16937000 [ 22.695141] OffChanReqHead = c007f880 [ 22.695141] OffChanReqTail = c007f884 [ 22.695141] OffChanDoneHead = c007f888 [ 22.695141] OffChanDoneTail = c007f88c [ 22.695242] WLAN(wdev0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 22.723511] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0 [ 22.723520] Build_IE_192 80MHz or less [ 22.724265] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=0 WLANID=0 [ 23.691270] finished scanning channel 36, traffic cnt 9086, bbu cnt 12991 [ 23.821237] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 23.821793] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0 [ 23.821798] Build_IE_192 80MHz or less [ 23.822478] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=0 WLANID=0 [ 23.822834] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 23.822871] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 2 [ 23.868933] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 23.869424] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0 [ 23.869428] Build_IE_192 80MHz or less [ 23.870257] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=0 WLANID=0 [ 23.870695] after ieee80211wRequired=0 ieee80211w=0 [ 23.871315] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 23.871792] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0 [ 23.871796] Build_IE_192 80MHz or less [ 23.872616] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=0 WLANID=0 [ 23.887304] device wdev0ap0 entered promiscuous mode [ 23.887334] br-lan: port 2(wdev0ap0) entered forwarding state [ 23.887347] br-lan: port 2(wdev0ap0) entered forwarding state [ 23.992696] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 24.072614] after ieee80211wRequired=0 ieee80211w=0 [ 24.170378] Setting Region Code not supported! [ 24.181890] Setting 20/40 Coexist on [ 24.183065] bftype is 6 [ 24.201269] finished scanning channel 40, traffic cnt 14, bbu cnt 3389 [ 24.229240] Stop client netdev = 0 [ 24.229925] setting rxantenna 0xf, 0xf [ 24.247798] setting txantenna 0x0, 0xf [ 24.274520] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0 [ 24.274523] Build_IE_192 80MHz or less [ 24.274989] req ring: vBase=0xd75cb000 pBase=175cb000 [ 24.274991] req ring: vBase=0xd1d0c000 pBase=11d0c000 [ 24.275018] OffChanReqHead = c007f880 [ 24.275018] OffChanReqTail = c007f884 [ 24.275018] OffChanDoneHead = c007f888 [ 24.275018] OffChanDoneTail = c007f88c [ 24.275143] WLAN(wdev1): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 24.302120] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0 [ 24.302128] Build_IE_192 80MHz or less [ 24.302819] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=1 WLANID=0 [ 24.711257] finished scanning channel 44, traffic cnt 38533, bbu cnt 52742 [ 25.221250] finished scanning channel 48, traffic cnt 1602, bbu cnt 8389 [ 25.271256] finished scanning channel 1, traffic cnt 22959, bbu cnt 208989 [ 25.491245] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 25.491795] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0 [ 25.491800] Build_IE_192 80MHz or less [ 25.492691] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=0 WLANID=0 [ 25.493147] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 25.493280] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 2 [ 25.540409] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 25.540902] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0 [ 25.540906] Build_IE_192 80MHz or less [ 25.541761] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=0 WLANID=0 [ 25.542376] after ieee80211wRequired=0 ieee80211w=0 [ 25.542921] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 25.543398] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0 [ 25.543402] Build_IE_192 80MHz or less [ 25.544214] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=0 WLANID=0 [ 25.559234] device wdev1ap0 entered promiscuous mode [ 25.559266] br-lan: port 3(wdev1ap0) entered forwarding state [ 25.559280] br-lan: port 3(wdev1ap0) entered forwarding state [ 25.711263] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 25.711817] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0 [ 25.711821] Build_IE_192 80MHz or less [ 25.712506] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=1 WLANID=0 [ 25.712645] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 25.712664] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 2 [ 25.721279] finished scanning channel 149, traffic cnt 17341, bbu cnt 21140 [ 25.771261] finished scanning channel 2, traffic cnt 11354, bbu cnt 118754 [ 25.778976] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 25.779520] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0 [ 25.779524] Build_IE_192 80MHz or less [ 25.780397] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=1 WLANID=0 [ 25.780879] after ieee80211wRequired=0 ieee80211w=0 [ 25.781484] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 25.781990] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0 [ 25.781994] Build_IE_192 80MHz or less [ 25.782818] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=1 WLANID=0 [ 25.881199] br-lan: port 2(wdev0ap0) entered forwarding state [ 26.231248] finished scanning channel 153, traffic cnt 4595, bbu cnt 6180 [ 26.271254] finished scanning channel 3, traffic cnt 1135, bbu cnt 28348 [ 26.741262] finished scanning channel 157, traffic cnt 4086, bbu cnt 5885 [ 26.771264] finished scanning channel 4, traffic cnt 5432, bbu cnt 91891 [ 27.251249] finished scanning channel 161, traffic cnt 54, bbu cnt 684 [ 27.271254] finished scanning channel 5, traffic cnt 7544, bbu cnt 98046 [ 27.551200] br-lan: port 3(wdev1ap0) entered forwarding state [ 27.751233] Stop client netdev = 0 [ 27.751246] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 27.752254] setting rxantenna 0xf, 0xf [ 27.771257] finished scanning channel 6, traffic cnt 23737, bbu cnt 217021 [ 27.772965] setting txantenna 0x0, 0xf [ 27.808871] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0 [ 27.808876] Build_IE_192 80MHz or less [ 27.809324] req ring: vBase=0xd1c33000 pBase=11c33000 [ 27.809327] req ring: vBase=0xd6937000 pBase=16937000 [ 27.809349] OffChanReqHead = c007f880 [ 27.809349] OffChanReqTail = c007f884 [ 27.809349] OffChanDoneHead = c007f888 [ 27.809349] OffChanDoneTail = c007f88c [ 27.809618] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0 [ 27.809621] Build_IE_192 80MHz or less [ 27.810501] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=0 WLANID=0 [ 28.271257] finished scanning channel 7, traffic cnt 11223, bbu cnt 128653 [ 28.771257] finished scanning channel 8, traffic cnt 656, bbu cnt 63469 [ 29.271254] finished scanning channel 9, traffic cnt 1117, bbu cnt 34704 [ 29.771257] finished scanning channel 10, traffic cnt 8027, bbu cnt 138392 [ 30.271256] finished scanning channel 11, traffic cnt 20026, bbu cnt 152402 [ 30.771239] Stop client netdev = 0 [ 30.771252] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3 [ 30.772270] setting rxantenna 0xf, 0xf [ 30.789952] setting txantenna 0x0, 0xf [ 30.823802] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0 [ 30.823809] Build_IE_192 80MHz or less [ 30.824278] req ring: vBase=0xd75cb000 pBase=175cb000 [ 30.824280] req ring: vBase=0xd1d0c000 pBase=11d0c000 [ 30.824307] OffChanReqHead = c007f880 [ 30.824307] OffChanReqTail = c007f884 [ 30.824307] OffChanDoneHead = c007f888 [ 30.824307] OffChanDoneTail = c007f88c [ 30.824615] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0 [ 30.824619] Build_IE_192 80MHz or less [ 30.825491] WTP_nable=0 macmode=0 tunnel_mode=0 RFID=1 WLANID=0 |
Pictures
See also
Categories:
- Linksys
- Embedded system/wireless router
- Embedded System Marvell
- Embedded System 88F6820
- Marvell
- Embedded System ARMv7
- Embedded System Cortex-A9
- Embedded System 88E6352
- Manuf Wistron NeWeb
- DD-WRT Supported
- Gargoyle Supported
- OpenWrt Supported
- Embedded System 88W8964
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation