Netgear WNR1000v3
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wireless-N 150 Router | |||||||||||||||||||||||||||||
Support | |||||||||||||||||||||||||||||
Wikipedia | |||||||||||||||||||||||||||||
InfoDepot Wiki | |||||||||||||||||||||||||||||
WikiDevi.wi-cat.ru | |||||||||||||||||||||||||||||
3rd Party Firmware | |||||||||||||||||||||||||||||
dd-wrt |
Not Supported | ||||||||||||||||||||||||||||
OpenWrt | |||||||||||||||||||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||||||||||||||||||
Gargoyle |
Status Unknown | ||||||||||||||||||||||||||||
Platform | |||||||||||||||||||||||||||||
Brand • Model • Rev |
Netgear WNR1000v3 | ||||||||||||||||||||||||||||
FCC ID | |||||||||||||||||||||||||||||
IC ID | |||||||||||||||||||||||||||||
Type |
wireless router | ||||||||||||||||||||||||||||
CPU1 ![]() |
Broadcom BCM5356A1 | ||||||||||||||||||||||||||||
CPU1 Type |
MIPS 74K | ||||||||||||||||||||||||||||
CPU1 Speed |
333 MHz | ||||||||||||||||||||||||||||
Flash1 Chip |
Macronix MX25L3205DM2I-12G | ||||||||||||||||||||||||||||
Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Serial) | ||||||||||||||||||||||||||||
RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||||||||||||||||||||||||||
RAM1 Chip |
ISSI IC42S16800E-6TL | ||||||||||||||||||||||||||||
ETH chip1 |
Broadcom BCM5356A1 | ||||||||||||||||||||||||||||
Switch |
Broadcom BCM5356A1 | ||||||||||||||||||||||||||||
Ethernet Port Count |
1-100MbE-WAN 1-100MbE-LAN | ||||||||||||||||||||||||||||
Wired Standard |
IEEE 802.3/3u | ||||||||||||||||||||||||||||
Stock bootloader |
CFE 3.0.6 vendor modified | ||||||||||||||||||||||||||||
Stock FW OS |
Linux 2.4.20 | ||||||||||||||||||||||||||||
Expansion IF types |
none specified | ||||||||||||||||||||||||||||
Power |
12 VDC, 1 A | ||||||||||||||||||||||||||||
Connector type |
barrel | ||||||||||||||||||||||||||||
Serial Port (UART) |
yes, internal, unpopulated, 6-pin header, (115200 8N1), 3.3V TTL, J3 | ||||||||||||||||||||||||||||
JTAG Port |
yes | ||||||||||||||||||||||||||||
Other | |||||||||||||||||||||||||||||
Default SSID: NETGEAR (44 addl. devices) | |||||||||||||||||||||||||||||
Manuf/OEM/ODM |
Foxconn U12H139 .99 | ||||||||||||||||||||||||||||
3rd Party Firmware Support | |||||||||||||||||||||||||||||
Retail | |||||||||||||||||||||||||||||
Availability | End of Life | ||||||||||||||||||||||||||||
FCC approval date | 16 November 2009 | ||||||||||||||||||||||||||||
Country of manuf | China, Vietnam | ||||||||||||||||||||||||||||
Physical | |||||||||||||||||||||||||||||
Dimensions |
28 x 175 x 118 mm (1.1 x 6.9 x 4.7 in) | ||||||||||||||||||||||||||||
Radio 1 | |||||||||||||||||||||||||||||
Chip1 |
Broadcom BCM5356A1 | ||||||||||||||||||||||||||||
Wireless interface OUI |
20:4E:7F, 30:46:9A, 84:1B:5E, C0:3F:0E, E0:91:F5 | ||||||||||||||||||||||||||||
Antenna Connector Type |
none specified | ||||||||||||||||||||||||||||
MIMO status |
1x1:1 | ||||||||||||||||||||||||||||
Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||||||||||||||||||
802.11n |
up to 150 Mbps | ||||||||||||||||||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||||||||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||||||||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||||||||||||||||||
Radio cor_rev |
21 | ||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
|
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Netgear device with specifications, see Netgear.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
"U12H139T99" and "Rev.0 GP" is silkscreened on the boards.
- The same hardware is also used for the Netgear WGR614v10.
OUIs may include 20:4E:7F, 84:1B:5E OUI
same HW as WGR614 v10 Netgear WGR614v10
Links of Interest
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
![]() | This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: bcm47xx
OpenWrt Subtarget: mips74k
OpenWrt Package architecture: mipsel_74kc
Support started version: 17.01.0
Current supported version: EOL
Last Supported Version: 22.03.7
Unsupported Functions:
WiFi 2.4GHz
Comment:
Releases after Backfire are not viable because of lack of sufficient RAM.
On the OpenWrt Wiki
OpenWrt Target: bcm47xx
OpenWrt Subtarget: mips74k
OpenWrt Package architecture: mipsel_74kc
Support started version: 17.01.0
Current supported version: EOL
Last Supported Version: 22.03.7
Unsupported Functions:
WiFi 2.4GHz
Comment:
Releases after Backfire are not viable because of lack of sufficient RAM.
Please insert instructions here
JTAG-Serial Info
Serial
Serial Pinouts
(GND) (TxD) (...) (...) (RxD) (+3.3v) o o o o o o 6 5 4 3 2 1 J3
Info derived from
boot log • >> |
---|
Decompressing...done Decompressing...done CFE for WNR1000v3 version: 3.0.6 Build Date: Thu Jan 21 22:38:48 CST 2010 Boot partition size = 131072(0x20000) Found a 4MB ST compatible serial flash et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.46 Device eth0: hwaddr C0-3F-0E-F0-FF-0C, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set CPU ProcId is: 0x00019749, options: 0x000021cd Primary instruction cache 32kb, linesize 32 bytes (4 ways) Primary data cache 32kb, linesize 32 bytes (4 ways) Linux version 2.4.20 (zacker@svn) (gcc version 3.2.3 with Broadcom modifications) #1 Fri Jul 16 18:22:57 CST 2010 Found a 4MB ST compatible serial flash Determined physical RAM map: memory: 01000000 @ 00000000 (usable) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200 CPU: BCM5356 rev 1 at 333 MHz Calibrating delay loop... 166.29 BogoMIPS Memory: 14312k/16384k available (1408k kernel code, 2072k reserved, 108k data, 60k init, 0k highmem) Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) Inode cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: no core PCI: Fixing up bus 0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xb8000300 (irq = 8) is a 16550A PPP generic driver version 2.4.2 sflash: squash filesystem with lzma found at block 706 Creating 10 MTD partitions on "sflash": 0x00000000-0x00020000 : "boot" 0x00020000-0x003c8000 : "linux" 0x000b0ae0-0x003c8000 : "rootfs" 0x003c8000-0x003d8000 : "ML1" 0x003d8000-0x003e8000 : "ML2" 0x003e8000-0x003f0000 : "T_Meter1" 0x003f0000-0x003f8000 : "T_Meter2" 0x003f8000-0x003f9000 : "POT" 0x003f9000-0x003fa000 : "board_data" 0x003fa000-0x00400000 : "nvram" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 2048) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k freed Reading board data... WSC UUID: 0xbf346fbfd4f68bc83e785dc9560e7f3a NTP synchronized date/time: Sat Aug 20 23:40:59 2011 MAC address of 1st STA connected: 00-21-63-1E-D2-23 Using /lib/modules/2.4.20/kernel/drivers/net/emf/emf.o Using /lib/modules/2.4.20/kernel/drivers/net/igs/igs.o Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o Hit enter to continue...WARNING: console log level set to 1 killall: upnp: no process killed UPnP daemon is ready to run killall: wps_monitor: no process killed killall: wps_ap: no process killed killall: wps_enr: no process killed Reading board data... WSC UUID: 0xbf346fbfd4f68bc83e785dc9560e7f3a Using /lib/modules/2.4.20/kernel/net/ipv4/acos_nat/acos_nat.o info, udhcp server (v0.9.8) started error, unable to parse 'option wins ' error, unable to parse 'option domain ' POT integrity check OK. POT time is up. IOCTL_AG_REGION_SET: English Start DHCP client daemon info, udhcp client (v0.9.8) started vlan1: No such process Hit enter to continue...Info: No FWPT default policies. Using /lib/modules/2.4.20/kernel/net/ipv4/multissidcontrol/MultiSsidControl.o httpd: socket bound in 192.168.1.1:80. |