Nexx WT1520F
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3G travel router | |||||||||||||
3rd Party Firmware | |||||||||||||
dd-wrt |
Status Unknown | ||||||||||||
OpenWrt | |||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||
Gargoyle |
Status Unknown | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev |
Nexx WT1520F v.1.3 | ||||||||||||
FCC ID |
none specified | ||||||||||||
Type |
wireless router, travel router | ||||||||||||
CPU1 |
Ralink RT5350 | ||||||||||||
CPU1 Type |
MIPS 24KEc | ||||||||||||
CPU1 Speed |
360 MHz | ||||||||||||
Flash1 Chip |
cFeon EN25Q64-104HIP | ||||||||||||
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||||||||||
RAM1 Chip |
EtronTech EM63A165TS-6G | ||||||||||||
ETH chip1 |
Ralink RT5350 | ||||||||||||
Switch |
Ralink RT5350 | ||||||||||||
Ethernet Port Count |
1-100MbE-WAN 1-100MbE-LAN | ||||||||||||
Wired Standard |
IEEE 802.3i/3u | ||||||||||||
Stock bootloader |
U-Boot 1.1.3 Ralink UBoot | ||||||||||||
Stock FW OS |
Linux 2.6.21 | ||||||||||||
Expansion IF types |
USB 2.0 | ||||||||||||
USB ports |
1 | ||||||||||||
USB Hub Compatible |
Untested | ||||||||||||
Power |
5 VDC, 1.2 A | ||||||||||||
Connector type |
USB Female Micro-B | ||||||||||||
Other | |||||||||||||
Default SSID: Sample_XXXXXX | |||||||||||||
3rd Party Firmware Support | |||||||||||||
Retail | |||||||||||||
(Est.) release date | 12 December 2013 | ||||||||||||
Country of manuf | China | ||||||||||||
Radio 1 | |||||||||||||
Chip1 |
Ralink RT5350 | ||||||||||||
Wireless interface OUI |
00:0C:43 | ||||||||||||
Antenna Connector Type |
none specified | ||||||||||||
MIMO status |
1x1:1 | ||||||||||||
Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||
802.11n |
up to 150 Mbps | ||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||
|
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Nexx device with specifications, see Nexx.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
See also Nexx WT3020 and Nexx WT1510U (FCC ID: N28WT1510U)..
Links of Interest
Product page for the WT1520 series
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 15.05
Current supported version: 22.03.7
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 15.05
Current supported version: 22.03.7
Please insert instructions here
Categories:
- Nexx
- Embedded system/wireless router
- Embedded system/travel router
- Embedded System Ralink
- Embedded System RT5350
- Ralink
- Embedded System MIPS 24KEc
- Embedded System
- OpenWrt Was Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation