Ubiquiti Networks NanoBeam 5AC Gen 2 WA

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac (AC2100)
airMAX NanoBeam 5AC
Homepage Product page
Wikipedia Ubiquiti Networks
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev Ubiquiti Networks NanoBeam 5AC Gen 2 WA
FCC ID SWX-NBE5ACG2W
Type access point
CPU1 checkY Atheros AR9342
CPU1 Type MIPS 74Kc
CPU1 Speed 535 MHz
Flash1 Chip Brand? Model?
Flash1 Size 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI NOR)
RAM1 Size 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (DDR2)
RAM1 Chip Brand? Model?
ETH chip1 Atheros AR9342
Switch Qualcomm Atheros QCA8334
Ethernet Port Count 2-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types none specified
Power 24 VDC, 0.5 A
Serial Port (UART) yes, 3.3V TTL, (115200 8N1)
JTAG Port no

Flags:
Outdoor

Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Radio 1
Chip1 Atheros AR9342
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 Qualcomm Atheros QCA9880
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 3x3:3
Wireless Standard IEEE 802.11a/n/ac
802.11ac up to 1300 Mbps
802.11n up to 450 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
Ubiquiti Networks NanoBeam 5AC 16 WAAtherosQualcomm Atheros
Ubiquiti Networks NanoBeam 5AC 19 XCQualcomm AtherosQualcomm Atheros
Ubiquiti Networks NanoBeam 5AC Gen 2 WAAtherosAtherosQualcomm Atheros
Ubiquiti Networks NanoBeam 5AC Gen 2 XCQualcomm AtherosQualcomm AtherosQualcomm Atheros
Ubiquiti Networks NanoBeam M2
Ubiquiti Networks NanoBeam M5 XWAtherosAtheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented Ubiquiti Networks devices with specifications, see Ubiquiti Networks.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.),
• 1733 Mbps - 4SS 5GHz 802.11ac (80MHz chan.) = AC2100 class

Flashing

Flashing OpenWrt

Target: ath79
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 21.02.0
Current supported version: 25.12.0
WLAN Comment: 19 dBi antenna, 2.4GHz is a management radio
Installation method(s):
U-Boot TFTP + serial recovery, see git-commit
Recovery method(s):
U-Boot TFTP recovery
git • >>
ath79: Add support for Ubiquiti NanoBeam AC Gen2
CPU:         Atheros AR9342 rev 3 SoC
RAM:         64 MB DDR2
Flash:       16 MB NOR SPI
WLAN 2.4GHz: Atheros AR9342 v3 (ath9k)
WLAN 5.0GHz: QCA988X
Ports:       2x GbE

Flashing procedure is identical to other ubnt devices.
https://openwrt.org/toh/ubiquiti/common

Flashing through factory firmware
1. Ensure firmware version v8.7.0 is installed.
   Up/downgrade to this exact version.
2. Patch fwupdate.real binary using
   `hexdump -Cv /bin/ubntbox | sed 's/14 40 fe 27/00 00 00 00/g' | \
    hexdump -R > /tmp/fwupdate.real`
3. Make the patched fwupdate.real binary executable using
   `chmod +x /tmp/fwupdate.real`
4. Copy the squashfs factory image to /tmp on the device
5. Flash OpenWrt using `/tmp/fwupdate.real -m <squashfs-factory image>`
6. Wait for the device to reboot
(copied from Ubiquiti NanoBeam AC and modified)

To keep it consistent, we will add the gen1 variant to
the nanobeam ac gen1.