Ubiquiti Networks NanoBeam M5 XW
From TechInfoDepot
Jump to navigationJump to search
| an (A300) | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| airMAX NanoBeam M5 | |||||||||||||||||||||||||||||
 | |||||||||||||||||||||||||||||
| Homepage | Product page | ||||||||||||||||||||||||||||
| Wikipedia | Ubiquiti Networks | ||||||||||||||||||||||||||||
| 3rd Party Firmware | |||||||||||||||||||||||||||||
| dd-wrt | Status Unknown | ||||||||||||||||||||||||||||
| OpenWrt | Supported | ||||||||||||||||||||||||||||
| Tomato any flavor | Incompatible | ||||||||||||||||||||||||||||
| Gargoyle | Status Unknown | ||||||||||||||||||||||||||||
| Platform | |||||||||||||||||||||||||||||
| Brand • Model • Rev | Ubiquiti Networks NanoBeam M5 XW | ||||||||||||||||||||||||||||
| FCC ID | none specified | ||||||||||||||||||||||||||||
| Type | access point | ||||||||||||||||||||||||||||
CPU1  | Atheros AR9342 | ||||||||||||||||||||||||||||
| CPU1 Type | MIPS 74Kc | ||||||||||||||||||||||||||||
| CPU1 Speed | 535 MHz | ||||||||||||||||||||||||||||
| Flash1 Chip | Brand? Model? | ||||||||||||||||||||||||||||
| Flash1 Size | 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||||||||||||||||||
| RAM1 Size | 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||||||||||||||||||||||||
| RAM1 Chip | Brand? Model? | ||||||||||||||||||||||||||||
| ETH chip1 | Atheros AR9342 | ||||||||||||||||||||||||||||
| Ethernet Port Count | 1-100MbE-LAN | ||||||||||||||||||||||||||||
| Wired Standard | IEEE 802.3i/3u | ||||||||||||||||||||||||||||
|
802dot11 OUI: none specified | |||||||||||||||||||||||||||||
| Stock bootloader | U-Boot | ||||||||||||||||||||||||||||
| Expansion IF types | none specified | ||||||||||||||||||||||||||||
| Power | 24 VDC, 0.5 A | ||||||||||||||||||||||||||||
| Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) | ||||||||||||||||||||||||||||
|
Flags: | |||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||
| Other | |||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||||||||||||||||||||||||||
| Radio 1 | |||||||||||||||||||||||||||||
| Chip1 | Atheros AR9342 | ||||||||||||||||||||||||||||
| Wireless interface OUI | none specified | ||||||||||||||||||||||||||||
| Antenna Connector Type | none specified | ||||||||||||||||||||||||||||
| MIMO status | 2x2:2 | ||||||||||||||||||||||||||||
| Wireless Standard | IEEE 802.11a/n | ||||||||||||||||||||||||||||
| 802.11n | up to 300 Mbps | ||||||||||||||||||||||||||||
| 802.11a | up to 54 Mbps | ||||||||||||||||||||||||||||
| WiFi Operating Frequency | 5 GHz | ||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Ubiquiti Networks devices with specifications, see Ubiquiti Networks.
- • 300 Mbps - 2SS 5GHz 802.11n (40MHz chan.) = A300 class
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
Target: ath79
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 15.05
Current supported version: 25.12.0
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 15.05
Current supported version: 25.12.0
LAN Hardware: Atheros AR9342
WLAN Hardware: Atheros AR9342
WLAN Comment: 2x2 MIMO
Installation method(s):
U-Boot TFTP recovery, see devicepage
Comment:
As of 24.10 NanoStation and NanoBeam share common image.
WLAN Hardware: Atheros AR9342
WLAN Comment: 2x2 MIMO
Installation method(s):
U-Boot TFTP recovery, see devicepage
Comment:
As of 24.10 NanoStation and NanoBeam share common image.
| git • >> |
|---|
ath79: add support for Ubiquiti NanoBeam M5 Ubiquiti NanoBeam M5 devices are CPE equipment for customer locations with one Ethernet port and a 5 GHz 300Mbps wireless interface. Specificatons: - Atheros AR9342 - 535 MHz CPU - 64 MB RAM - 8 MB Flash - 1x 10/100 Mbps Ethernet with passive PoE input (24 V) - 6 LEDs of which four are rssi - 1 reset button - UART (4-pin) header on PCB Notes: The device was supported by OpenWrt in ar71xx. Flash instructions (web/ssh/tftp): Loading the image via ssh vias a stock firmware prior "AirOS 5.6". Downgrading stock is possible. * Flashing is possible via AirOS software update page: The "factory" ROM image is recognized as non-native and then installed correctly. AirOS warns to better be familiar with the recovery procedure. * Flashing can be done via ssh, which is becoming difficult due to legacy keyexchange methods. This is an exempary ssh-config: KexAlgorithms +diffie-hellman-group1-sha1 HostKeyAlgorithms ssh-rsa PubkeyAcceptedKeyTypes ssh-rsa User ubnt The password is ubnt. Connecting via IPv6 link local worked best for me. 1. scp the factory image to /tmp 2. fwupdate.real -m /tmp/firmware_image_file.bin -d * Alternatively tftp is possible: 1. Configure PC with static IP 192.168.1.2/24. 2. Enter the rescue mode. Power off the device, push the reset button on the device (or the PoE) and keep it pressed. Power on the device, while still pushing the reset button. 3. When all the leds blink at the same time, release the reset button. 4. Upload the firmware image file via TFTP: tftp 192.168.1.20 tftp> bin tftp> trace Packet tracing on. tftp> put firmware_image.bin |
