GL.iNet GL-X3000
From TechInfoDepot
Jump to navigationJump to searchabgn+ac+ax (AX3000) | |
---|---|
Wi-Fi 6 Dual-SIM 4G/5G Cellular Gateway | |
Homepage | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
GL.iNet GL-X3000 Spitz AX |
FCC ID | |
Type |
travel router |
CPU1 |
MediaTek MT7981BA |
CPU1 Type |
ARM Cortex-A53 (Filogic 820) |
CPU1 Speed |
1.3 GHz ( 2 cores ) 64-bit |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> (eMMC) |
RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR4) |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
MediaTek MT7981BA |
Switch |
MediaTek MT7981BA |
Ethernet Port Count |
1-2.5GbE-WAN 1-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab/3bz |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Expansion IF types |
microSDXC, USB 2.0, nano SIM |
SIM Card slot |
2 |
USB ports |
1 |
SD/MMC Slots |
1 |
USB Hub Compatible |
Untested |
Power |
12 VDC, 2.5 A |
Flags: Wi-Fi 6 | |
Other | |
| |
3rd Party Firmware Support | |
Radio 1 | |
Chip1 |
MediaTek MT7981BA |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x3:2 |
Wireless Standard |
IEEE 802.11b/g/n/ax |
802.11ax |
up to 574 Mbps |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio 2 | |
Chip1 |
MediaTek MT7976CN |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
3x3:2 |
Wireless Standard |
IEEE 802.11a/n/ac/ax |
AX-QAM |
up to 2402 Mbps |
802.11ax |
up to 1201 Mbps |
802.11ac |
up to 867 Mbps |
802.11n |
up to 300 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented GL.iNet device with specifications, see GL.iNet.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Forum
OpenWrt Target: mediatek
OpenWrt Subtarget: filogic
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: ?
Current supported version: snapshot
Comment:
Quectel RM520N-GL modem with 2 nano SIM card slots
On the OpenWrt Forum
OpenWrt Target: mediatek
OpenWrt Subtarget: filogic
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: ?
Current supported version: snapshot
Comment:
Quectel RM520N-GL modem with 2 nano SIM card slots
Please insert instructions here
Categories:
- GL.iNet
- Embedded system/travel router
- Embedded System MediaTek
- Embedded System MT7981BA
- MediaTek
- Embedded System ARM
- Embedded System Cortex-A53 (''Filogic 820'')
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System MT7976CN
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation