Cudy WR2100
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac (AC2100) | |
|---|---|
| AC2100 Dual Band Wi-Fi Router | |
|
| |
| Homepage | Product page |
| WikiDevi.wi-cat.ru | Cudy WR2100 |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Cudy WR2100 rev 1.0 |
| FCC ID | none specified |
| Type | wireless router |
| CPU1 | MediaTek MT7621DAT |
| CPU1 Type | MIPS 1004Kc |
| CPU1 Speed | 880 MHz ( 2 cores ) 16-bit |
| Flash1 Chip | Winbond W25Q128JVSQ |
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI NOR) |
| RAM1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (DDR3L SDRAM) |
| RAM1 Chip | MediaTek MT7621DAT |
| ETH chip1 | MediaTek MT7621DAT |
| Switch | MediaTek MT7621DAT |
| Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
| 802.1q vlan | Yes |
| Stock bootloader | U-Boot 1.1.3 |
| Stock FW OS | Linux 5.4.119 |
| Expansion IF types | none specified |
| Power | 12 VDC, 1.5 A |
| Connector type |
barrel 5.5 mm (OD) 2.1 mm (ID) 9.5 mm (LEN) |
| Serial Port (UART) | yes, 4-pin header, unpopulated, J1, 3.3V TTL, (57600 8N1) |
|
Flags: | |
|
| |
| Other | |
|
Default SSID: Cudy-XXXX (14 addl. devices) | |
| Manuf/OEM/ODM | Cudy |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Retail | |
| Availability | End of Life |
| (Est.) release date | November 2020 |
| UPC |
644925515241 (UPC DB, On eBay) |
| EAN |
6971690791384 (UPC DB, On eBay) |
| ASIN |
B089GNFCHS |
| Country of manuf | China |
| Radio 1 | |
| Chip1 | MediaTek MT7603EN |
| Wireless interface OUI | B4:4B:D6 |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
| Radio 2 | |
| Chip1 | MediaTek MT7615N |
| Wireless interface OUI | B4:4B:D6 |
| Antenna Connector Type | none specified |
| MIMO status | 4x4:4 |
| Wireless Standard | IEEE 802.11a/n/ac |
| 802.11ac | up to 1733 Mbps |
| 802.11n | up to 600 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 5 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Cudy devices with specifications, see Cudy.
Overview
Hardware specification
- CPU: MediaTek MT7621DAT @880MHz
- SoC: Dual-core MIPS (1004Kc)
- Flash: 16MB (SPI NOR) flash
- Memory: 256MB (DDR3L) SDRAM
- Wi-Fi: MediaTek MT7603EN
- 802.11abgn (2.4GHz) 2x2:2
- MediaTek MT7615N
- 802.11an/ac (5GHz) 4x4:4
- Network: 5x GbE port
- Power Source: 12V/1.5A via barrel
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
OpenWrt Target: ramips
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: 21.02.0
Current supported version: 24.10.4
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: 21.02.0
Current supported version: 24.10.4
Install Comment:
Need a signed OpenWrt intermediary image from Cudy before installing official OpenWrt image.
Need a signed OpenWrt intermediary image from Cudy before installing official OpenWrt image.
Please insert instructions here
Pictures
See also
This article's use of red links may need cleanup. |
|
|
Categories:
- Cudy
- Embedded system/wireless router
- Embedded System MediaTek
- Embedded System MT7621DAT
- MediaTek
- Embedded System MIPS 1004Kc
- Embedded System
- Manuf Cudy
- OpenWrt Supported
- Embedded System MT7603EN
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System MT7615N
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation