Database changes have finished applying - please report any issues you're (still) seeing to support@shoutwiki.com.
GL.iNet GL-MT6000 (Flint 2)
abgn+ac+ax (AX60002R) | |
---|---|
High-Performance Wi-Fi 6 Router | |
![]() | |
Homepage | Product page |
WikiDevi.wi-cat.ru | GL.iNet GL-MT6000 (Flint 2) |
3rd Party Firmware | |
dd-wrt | Status Unknown |
OpenWrt | Supported |
Tomato any flavor | Incompatible |
Gargoyle | Status Unknown |
Platform | |
Brand • Model • Rev | GL.iNet GL-MT6000 (Flint 2) |
FCC ID | 2AFIW-MT6000 |
IC ID | 23019-MT6000 |
Type | wireless router |
CPU1 ![]() | MediaTek MT7986AV |
CPU1 Type | ARM Cortex-A53 |
CPU1 Speed | 2.0 GHz ( 4 cores ) 64-bit |
Flash1 Chip | Samsung KLM8G1GETF-B041 |
Flash1 Size | 8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> (eMMC 5.1 NAND) |
RAM1 Size | 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (DDR4 SDRAM) |
RAM1 Chip | Nanya NT5AD512M16C4-JR |
ETH chip1 | MediaTek MT7986AV |
ETH chip2 | Realtek RTL8221B |
ETH chip3 | Realtek RTL8221B |
Switch | MediaTek MT7531AE |
Ethernet Port Count |
2-2.5GbE-WAN 4-1GbE-LAN |
Wired Standard | IEEE 802.3/3u/3ab/3bz |
Stock bootloader | U-Boot |
Expansion IF types | USB 3.0 |
USB ports | 1 |
USB Hub Compatible | Untested |
Power | 12 VDC, 4 A |
Connector type |
barrel 5.5 mm (OD) 2.1 mm (ID) 9.5 mm (LEN) |
Serial Port (UART) | yes, 4-pin header, unpopulated, J1, 3.3V TTL, (115200 8N1) |
JTAG Port | yes, 9-pin header, unpopulated |
Flags: | |
Additional chips | |
Other | |
Default SSID: GL-MT6000-XXX | |
3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) , Tomato64 |
Retail | |
FCC approval date | 06 December 2023 |
(Est.) release date | November 2023 |
(Est.) initial retail price (in USD): | $159 |
UPC |
6971131384199 (UPC DB, On eBay) |
ASIN |
B0CP7S3117 ![]() |
Country of manuf | China |
Physical | |
Dimensions | 233 x 137 x 53mm |
Weight | 761g |
Radio 1 | |
Chip1 | MediaTek MT7986AV |
Chip2 | MediaTek MT7976GN |
Wireless interface OUI | 94:83:C4 |
Antenna Connector Type | U.FL |
MIMO status | 4x4:4 |
Wireless Standard | IEEE 802.11b/g/n/ax |
802.11ax | up to 1148 Mbps |
802.11n | up to 600 Mbps |
802.11g | up to 54 Mbps |
802.11b | up to 11 Mbps |
WiFi Operating Frequency | 2.4 GHz |
Radio 2 | |
Chip1 | MediaTek MT7986AV |
Chip2 | MediaTek MT7976AN |
Wireless interface OUI | 94:83:C4 |
Antenna Connector Type | U.FL |
MIMO status | 4x4:4 |
Wireless Standard | IEEE 802.11a/n/ac/ax |
802.11ax | up to 4804 Mbps |
802.11ac | up to 1733 Mbps |
802.11n | up to 600 Mbps |
802.11a | up to 54 Mbps |
WiFi Operating Frequency | 5 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented GL.iNet devices with specifications, see GL.iNet.
Overview
"MT6000-V1.0" is silk-screened on board
Hardware specification
- CPU: MediaTek MT7986AV @2.0GHz (Filogic 830)
- SoC: Quad-core ARM (Cortex-A53) 12nm
- Storage: 4GB (eMMC 5.1) Flash
- Memory: 1GB (DDR4 3200MHz) SDRAM
- USB: 1x USB 3.0 port
- Wi-Fi: MediaTek MT7986AV/MT7976GN/MT7976AN
- 802.11abgn/ac/ax Dual Band 4x4 2.4GHz + 4x4 5GHz
- Network: 2x 2.5GbE (WAN/LAN), 4x 1GbE (LAN) ports
- Power Source: 12V/4A via barrel
Links of Interest
Reviews
- GL.iNet GL-MT6000 “Flint 2” WiFi 6 router review on CNX|Software
- GL.iNet Flint 2 Wi-Fi 6 GL-MT6000 router with dual 2.5 Gbps on Geeky Gadgets
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: mediatek
OpenWrt Subtarget: filogic
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: 23.05.3
Current supported version: 24.10.2
LAN Comment:
2x Realtek RTL8221B 2.5Gbe Phy
WLAN Comment:
4x4:4 MU-MIMO, Zero DFS, HE160, 4 non-detachable antennas
Install Comment:
Flash OpenWrt 'sysupgrade' image from GL.iNet web UI, select do not keep settings Do not use 'factory' image to preserve GL U-boot.
Please insert instructions here
Pictures
See also
Models
- GL.iNet
- Embedded system/wireless router
- Embedded System MediaTek
- Embedded System MT7986AV
- MediaTek
- Embedded System ARM
- Embedded System Cortex-A53
- Embedded System RTL8221B
- Embedded System Realtek
- Realtek
- Embedded System MT7531AE
- OpenWrt Supported
- Tomato64 Supported
- Embedded System MT7976GN
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System MT7976AN
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation